0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

HappiJac Turnbuckles – Lot de 4, attaches de camping-car pour camion ; 2 tendeurs à ressort FM-TBS, 2 tendeurs anti-stress FM-TBR avec crochets en J pour des points d'ancrage sécurisés ; Acier inoxydable, zingué – 182898

Brand:HAPPIJAC

3.5/5

€
219.10

Personne ne veut rester à la maison et manquer un week-end de camping amusant, car son équipement ne fonctionne pas comme il le devrait. C'est pourquoi chez Lippert™, nous vous aidons à éliminer les devinettes des pièces de rechange en fournissant des composants de remplacement directs qui permettront à votre camping-car de fonctionner comme d'habitude. Notre ensemble de tendeurs standard de remplacement vous aidera à sécuriser les attaches de votre camping-car. En tant que pièce de correspondance exacte, ce produit s'installe comme vos tendeurs standard d'origine et est livré avec tout ce dont vous avez besoin pour remplacer votre équipement. Livré avec (4) tendeurs, (2) FM-TBS (à ressort) et (2) FM-TBR (Stress Guard). Ces tendeurs sont entièrement réglables et la tension peut être ajustée après l'installation pour une sécurité accrue. Que vous soyez sur la route ou sur l'eau, Lippert fournit une large gamme de produits haut de gamme pour camping-cars, remorquage et marine conçus pour améliorer toutes vos activités récréatives. . Notre équipe s'engage à toujours penser à votre prochain voyage - en repoussant les possibilités de nos produits et services, le tout pour améliorer votre temps passé à l'extérieur, n'importe quand, n'importe où, pour les années à venir.

Montant
Ajouter au panierAcheter maintenant

EAN: 0835779000278

Catégories Automobile, Accessoires extérieurs, Produits de remorquage et treuils, Barres de remorquage,

La tension peut être ajustée après l'installation pour une stabilité maximale. Entièrement réglable. (2) FM-TBR (Stress Guard). (2) FM-TBS (à ressort). (4) tendeurs. Jeu de tendeurs standard de remplacement. Type d'ajustement : ajustement universel.
Brand ‎HAPPIJAC
Customer Reviews 4.5 4.5 out of 5 stars 272 ratings 4.5 out of 5 stars
Item model number ‎182898
Item Weight ‎8.33 pounds
Manufacturer ‎HappiJac
Manufacturer Part Number ‎182898
Model ‎Standard Turnbuckle Replacement Set for Truck Camper Tie Down
Product Dimensions ‎25.5 x 7.5 x 1.5 inches

3.5

8 Review
5 Star
71
4 Star
18
3 Star
3
2 Star
2
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Fred Keezer
CAN be used on Frame mounted tie downs like torklift types.
I have frame mounted tie downs, fabricated by a welder for less than 1/2 the price, but wanted a different type of turnbuckle system than the weird ancient spring cans that came with my used camper. I bought the 4 piece set here on Amazon and they work great IF you install them correctly. There are actually only 2 of them that are spring loaded and two that are dampered. The Spring loaded ones HAVE to go up front. the dampered set goes in back. DONT reverse this or you'll either rip out your camper tie point or break your turnbuckle by putting the dampered ones up front. For the front ones, they will be the ones with the short barrel. You will need about 12-16" of Chain and a chain link adapter. this will probably cost a total of $12 total. I will add pictures. What you need to understand is the dynamics of what is happening to the camper. The forward motion develops resistance which causes a slight up and down movement up front of the cabover and a pivot point near the rear. this is why you need the springs up front. These are designed for happijack fronts which are mounted lower bed level as opposed to the bottom frame type, but this set is so much less expensive than the torklift brand its worth the effort. I traveled this last week over hills and gravel and highway and they worked great. Remember to first thread on the individual jam nuts that come in the small package before you thread the cylinder on. once you mark the rod, start tightening the cylinder and measure the 1/4 mark. Tighten down the jam nut and your set. The rears are a bit of a judgement call, but DO NOT over torque the rear dampners. they could stress your camper tie point. just enough to be able to stay in place with a little extra 1/2 turn.
Scritto da: Amazon Customer
A must have for truck campers
Easy directions, a must have for a truck camper. I would buy again
Scritto da: Robin Shaffer
Good value, good product.
Compared to some of the other turnbuckles out there, these are less expensive and seem to work well. Using them on my 2004 Lance 921, which is a heavy camper. The front turnbuckles are shorter, so I had to buy some heavy duty chain to make sure they would connect to the frame mounts. Good price, good product.
Scritto da: Russell
Comes with good directions.
My old turnbuckles finally gave out on me. These worked perfectly and I was able to do away with the chain links on the back as the rear turnbuckles are longer.
Scritto da: Kindle Customer
Great product and excellent customer service
I've used these turnbuckles twice. The first time, they performed flawlessly. No problems at all. They are easy to put on, easy to take off, and performed the job they were intended to do. The second time, they went on easily, did their job for the weekend. Then, when I took them off, one of the long ones wouldn't loosen up. I had to get a wrench and really crank on the thing to get it off the truck. By the time I got the turnbuckle off, the nut on the end was almost too hot to touch. The threads on the threaded J-hook looked fine, but I couldn't see the threads down at the bottom of the nut. I put a tap down the hole, hoping to clean up whatever was causing the friction, but that didn't fix it. I haven't talked to Lippert yet. I'll update this review after I chat with them. Update: I contacted Lippert/Happijac and let them know about the issue and asked for suggestions to fix the problem. With just one email providiing some photos and measurements, they sent me another turnbuckle and threaded J-hook. Excellent customer service and they stand by their products. I'm changing this to 5 stars.
Scritto da: T. Beard
Great (maybe best?) value in camper tie downs
A good value for four camper tiedown turnbuckles for less than 150$.
Scritto da: cwglindn
Tie Downs for a HappiJac Camper system worked for Ford F-250 2015
Part of a Happijac system to hold down a cabover camper on my 2015 F-2015. Only issues with the new system is that it is initially very hard to turn, especially the long bars. After turning with wrenches and lubricant, it loosened up to put on the truck. Remember the short ones only have springs and need to be up front. THe long ones do NOT have springs and are for stabilizing.
Scritto da: Amazon Customer
Happijack turnbuckles
East to install and provide a much more secure system than the old turnbuckle. In one trip the camper never moved and the turnbuckle did not need tightening at all.

Produits connexes

hot
HappiJac Turnbuckles – Lot de 4, attaches de camping-car pour camion ; 2 tendeurs à ressort FM-TBS, 2 tendeurs anti-stress FM-TBR avec crochets en J pour des points d'ancrage sécurisés ; Acier inoxydable, zingué – 182898
3.5/5

€ 219.10

HappiJac Turnbuckles – Lot de 4, attaches de camping-car pour camion ; 2 tendeurs à ressort FM-TBS, 2 tendeurs anti-stress FM-TBR avec crochets en J pour des points d'ancrage sécurisés ; Acier inoxydable, zingué – 182898
3.5/5

€ 219.10

hot
CURT 70101 Supports de plaque de base de barre de remorquage personnalisés pour le remorquage de dériveur, convient à certains Dodge Durango, Jeep Grand Cherokee
2.8/5

€ 813.93

CURT 70101 Supports de plaque de base de barre de remorquage personnalisés pour le remorquage de dériveur, convient à certains Dodge Durango, Jeep Grand Cherokee
2.8/5

€ 813.93

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu