0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

HHIP 3900-3313 Plaque arrière/adaptateur pour 6 mandrins de tour, taille 6 non filetée, non filetée

Brand:HHIP

3.3/5

€
151.52

HHIP Plaque arrière/adaptateur non filetée pour mandrins de tour de 6 pouces. Pas de trous de boulon. Un usinage est nécessaire avant de monter votre mandrin pour assurer la concentricité. Pour mandrins à 3 et 4 mors. Fabriqué en acier coulé de haute qualité. Diamètre du corps (a) : 160 mm, filetage (b) : non fileté, diamètre du moyeu (F) : 75 mm, longueur du moyeu (G) : 24 mm, bossage Len (G) : 4 mm, face Len H (g+h) : 40 mm, tous Len (g + h) : 44 mm, Boss dia : 130 mm.

Montant
Ajouter au panierAcheter maintenant

EAN: 0769053087610

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour tours, Accessoires,

Fabriqué en acier coulé de haute qualité. À utiliser pour les mandrins à 3 et 4 mors. Un usinage est nécessaire avant de monter votre mandrin pour assurer la concentricité. Pas de trous de boulon.
Brand HHIP
Compatible Devices Lathe
Item Diameter 6.3 Inches
Item model number 3900-3313
Item Weight 6.9 Pounds
Manufacturer ABS Import Tools, Inc.
Material Alloy Steel
Product Dimensions 6 x 6 x 6 inches; 6.9 Pounds

3.3

13 Review
5 Star
65
4 Star
17
3 Star
5
2 Star
5
1 Star
8

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: R Merrill
Cast Iron
It got the job done, but it put off a lot of dust. Fit Grizzly G4000 lathe (M39X4 threads)
Scritto da: castel Michel
Not top quality but he gets the job done
For the price point, lets be honest here, (plus free shipping) internal single point threading, the dust is a small price to pay, specially if you will fit it to a 6" chuck. Overall I'm please with it. It will get the job done.
Scritto da: Tim W.
Good Adapter Plate ????????????????????
I bought this backplate adapter for my newly purchased 4-jaw chuck. Once received I turned it on my lathe to fit the chuck contour. Then I lined up and drilled the appropriate holes for mounting to the chuck. It preforms flawlessly ????
Scritto da: Tyler Glidden
Worked well for me.
This is a very stout backplate. The threads fit well on my spindle. It appears to be made from gray cast iron (as opposed to ductile cast iron) which is fine, just know that it wont really make chips when you machine it, more like a powder.
Scritto da: Amazon Customer
Well made back plate
A well made product. Mated up to exisiting machine with no problems
Scritto da: Ed R.
Decent backplate.
Had to machine down for a 5 inch chuck. Could not get a decent quality surface finish, but it works for me.
Scritto da: thomas jeffries
Better (and cheaper) options available.
Pros: -Threaded correctly on logan/Montgomery-Ward 700a, -machined nicely (but with the fine-powder chips typical of cast iron) Cons: -Porous cast iron, far more than similar backplates from Shars etc, which are made of higher grades of cast iron -lots of runout, had to machine all faces and OD as well as minor diameter to get it true. Before machining front face was off by .020" at least, minor mounting diameter by about .015, once again way worse than Shars -weebly walls on the threaded section. Wall thickness of only about 3/8 on contact point with the spindle nose, which meant poor stiffness (was able to move +-.002" in each direction pulling and pushing by hand; stiffer backplate and bare spindle move only about .0005" Max). This causes uncontrollable chatter when turning steel. Replacing with my other stiffer backplate (caveat; with a different chuck) totally eliminated this chatter.
Scritto da: J&J
Its a cast backing plate
I needed this to make a chuck backing plate for my old sb lathe. We will see how well it takes a thread soon. I will update my review if its bad
Scritto da: Amazon Customer
Pretty good!
Took a chance on it as some people seem to have issues with surface finish and defects in the casting. Worked great for me though. Price is a little high for what it is, but the finish was nice. I had to open up the register a little bit to fit the southbend 9” lathe. Mounted a 6” 3 jaw accusize chuck.
Scritto da: Velo
It does the job its supposed to.
Backplate worked out well. As supplied TIR (runout ) was only 0.004" on the OD and Face. It machined well to fit my 4 jaw chuck. Recommended buy.
Scritto da: Name Here
It Work
It works for that it is but it's a very low quality casting and very hard to get a good surface finish.
Scritto da: Doug Arril
Very quick response
Exactly what was ordered, fast service if only I could get threaded backing plates at my location. It would save me threading them
Scritto da: florence smith
worked for me
This fit my Logan lathe. I faced it off to fit a new 5 inch Accusize chuck. A lot of material to remove but it works well

Produits connexes

hot
Steelex M1061 Mandrin à 4 mâchoires 15,2 cm
3.2/5

€ 268.38

Steelex M1061 Mandrin à 4 mâchoires 15,2 cm
3.2/5

€ 268.38

hot
PSI Woodworking PKM-BL Mandrin de stylo à visser 1 x 8tpi 1 x 8tpi à visser
3.6/5

€ 60.73

PSI Woodworking PKM-BL Mandrin de stylo à visser 1 x 8tpi 1 x 8tpi à visser
3.6/5

€ 60.73

hot
uxcell 2pcs 6mm x 200mm Métal Machine Tournant Outil Barre Barre Tour Bâton Rond 6mmx200mm
3.2/5

€ 25.98

uxcell 2pcs 6mm x 200mm Métal Machine Tournant Outil Barre Barre Tour Bâton Rond 6mmx200mm
3.2/5

€ 25.98

hot
Proxxon 27028 Mandrin de perçage avec douille coulissante pour poupée mobile de DB 250, argent
3.5/5

€ 42.53

Proxxon 27028 Mandrin de perçage avec douille coulissante pour poupée mobile de DB 250, argent
3.5/5

€ 42.53

hot
Mâchoires de mandrin souples en acier USST KT-6150P pour 6 mandrins de tour CNC, hauteur 1,5 (lot de 3 pièces)
4.1/5

€ 70.49

Mâchoires de mandrin souples en acier USST KT-6150P pour 6 mandrins de tour CNC, hauteur 1,5 (lot de 3 pièces)
4.1/5

€ 70.49

hot
Mâchoires de mandrin souples en acier USST KT-6200P pour 6 mandrins de tour CNC, 2 grands (lot de 3 pièces)
3.9/5

€ 86.05

Mâchoires de mandrin souples en acier USST KT-6200P pour 6 mandrins de tour CNC, 2 grands (lot de 3 pièces)
3.9/5

€ 86.05

hot
Jacobs 33363 JK 130-1/2 Mandrin sans clé de qualité industrielle Capacité de 1,0 à 13,0 millimètres avec support fileté 1/2" 20
3/5

€ 133.78

Jacobs 33363 JK 130-1/2 Mandrin sans clé de qualité industrielle Capacité de 1,0 à 13,0 millimètres avec support fileté 1/2" 20
3/5

€ 133.78

hot
PSI Woodworking PKM-FSM Système de mandrin de stylo sans clé #2 Cône Morse
4.1/5

€ 64.14

PSI Woodworking PKM-FSM Système de mandrin de stylo sans clé #2 Cône Morse
4.1/5

€ 64.14

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu