0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Hopkins Towing Solutions FloTool 10111/6 Injecteur Mixmizer

Brand:Hopkins Towing Solutions

3.5/5

€
34.72

DESCRIPTION DU PRODUIT FloTool, de Hopkins Manufacturing, propose l'offre la plus complète et de la plus haute qualité de produits de traitement des fluides. Poussé par des solutions de produits innovantes et sans gâchis, que vous changiez votre huile, remplissiez l'antigel ou vérifiiez tous vos niveaux de liquide automobile, FloTool a la bonne application. L'injecteur MixMizer de FloTool est idéal pour mesurer et mélanger uniquement ce qui est nécessaire pour vos moteurs 2 temps. L'échelle de rapport élimine les conjectures concernant le mélange de pétrole et de gaz. Complet avec un tube d'extension 4 pour une utilisation facile. DU FABRICANT Mixmizer pour moteurs à 2 temps uniquement, mesurer et mélanger uniquement ce qui est nécessaire, l'échelle de rapport élimine les conjectures du mélange d'huile et de gaz, complet avec tube d'extension, plastique

Montant
Ajouter au panierAcheter maintenant

EAN: 098213107562

Catégories Automobile, Pièces de rechange, Système de carburant, Injection de carburant, Injecteurs de carburant et pièces, Injecteurs de carburant,

Conception innovante et robuste. Sûr et facile à utiliser. Complet avec un tube d'extension 4 pour une utilisation facile. L'échelle de rapport élimine les conjectures concernant le mélange de pétrole et de gaz. Idéal pour mesurer et mélanger uniquement ce qui est nécessaire pour vos moteurs 2 temps.
Brand Hopkins Towing Solutions
Brand ‎Hopkins Towing Solutions
Customer Reviews 4.5 4.5 out of 5 stars 587 ratings 4.5 out of 5 stars
Exterior Brushed
Exterior ‎Brushed
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 5 x 2 inches
Item model number ‎10111/6
Item Weight ‎0.01 ounces
Manufacturer ‎Hopkins Manufacturing
Manufacturer Part Number ‎10111/6
Material Plastic
Product Dimensions ‎9 x 5 x 2 inches

3.5

8 Review
5 Star
70
4 Star
17
3 Star
9
2 Star
3
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Exactly what i needed
excellent
Exactly what i asked for a
Scritto da: Fernando L.
Great product and value
Great product in value
Scritto da: HiPowerShooter
So far so good
While not a 'one hand operation' tool, it does the job, and makes measuring smaller oil amounts for mixing a bit easier. Accuracy, I can only hope so, and it does work with two hand operation.
Scritto da: D. Morrison
Better than other methods.
The Hopkins MixMizer is an all plastic graduated syringe that provides 2 cycle oil measurements, provided by Hopkins, for 1 pint fuel/oil ratio's of 16:1, 25:1 32:1, 40:1, 50:1 and 100:1 it also provides 1 quart, ½ Liter and 1 Liter fuel/oil mix ratio's for 25:1 32:1, 40:1, 50:1 and 100:1. For larger volumes of fuel you just increase the number of times you fill the syringe with oil, It also provides ½, 1, 1-1/2 and 2 oz measurements and 0 to 60 cc measurements in 2 cc increments. It takes very little practice to get consistent measurements if you use standard syringe filling procedures. I did note that the black marks on the syringe provided by Hopkins tend to provide a slightly oil rich fuel / oil mix. My thoughts on 2 stroke engines is that it's better to error a little rich on oil than lean since I would rather foul a spark plug than seize an engine. The plastic hose, nozzle extension, is handy to get towards the bottom of 1 quart oil bottles but it is not long enough to get to the bottom of larger oil containers. After using the syringe to extract oil from the bottle, with the nozzle on, I remove the extension to avoid an oil rich mix before injecting the oil into the fuel container. I have found that the MixMizer is a lot less messy than using a graduated cylinder or trying to use a measuring spoon since you are able to force almost all of the oil from the syringe. I noted that a few cc's of oil are retained in the tip of the syringe. Most of this residual oil can be expelled back into the oil bottle by cycling the syringe a few times. The only things that it doesn't come with are a cap to keep the nozzle clean and a zip lock bag to store it in.
Scritto da: Kelvin O
Not Great
Would be better if it were glass. The plunger is to difficult to pull out.
Scritto da: ACPDad
Guarantees Fresh Fuel Mix
This mixing tool always guarantees a fresh mix of fuel for your tools with two stroke engines. I've owned one for several years. Before I bought this mixing tool, I would make 1 gallon of fuel mix at a time and it would usually sit around in the can for months until it could all be used. The markings on the cylinder make it simple to get the correct mix very quickly and consistently and allows you to mix quantities from a 1/2 pint to probably a gallon. I make a pint of fuel mix in a 1 qt plastic measuring cup using fresh gasoline whenever I need it. A pint is usually good for 1 1/2 - 2 fills of my blower vac, string trimmer or chain saw, all of which require a 50:1 mix, which is typically what I need for the amount of work I have whenever I use a tool. Yes, it may take a little more time to mix a small amount of fuel whenever it is needed rather than mixing a gallon at one time but I know the fuel will always be fresh and provide the best performance. Also, there is one less gas can taking up space in my garage. This is a really convenient and inexpensive tool that you'll probably appreciate a little more every time you use it.
Scritto da: Consumer of Things
Excellent and precise, with one caution...
I used one of these for years before now having to replace it. It’s excellent for the persnickety folks among us that want a precise mix ratio. Word of caution, make sure you don’t leave any petroleum products in it that will gum when left alone for a season or two. I made this mistake and the thing was so stuck shut that when I went to use it in the spring, the piston/plunger was glued by this gum, into the syringe body. I pulled to hard in an attempt to free it, effectively breaking it off at the point where the plunger stem meets the plunger.
Scritto da: G Hammer
It's OK for the price.
I mix two-stroke fuel in less-than-a-gallon quantities, and this product is very helpful. As others have said, the plunger can be difficult to operate due to friction. My other complaint is they only seem to last a couple/three years even with occasional use. I probably use it 4 times/year, but after 2 or 3 years, the ring/handle on the plunger breaks when trying to operate the plunger. This breakage is despite trying to be careful. Another reviewer mentioned using a flat-blade screwdriver to get the plunger started when raising. I'll have to try that.

Produits connexes

hot
ORCU Driven by true quality FPE - Injecteur de chariot élévateur-LPG Nikki 16600-GS17B Fabricant d'équipement d'origine (OEM) - Nouveau
0.1/5

€ 522.53

ORCU Driven by true quality FPE - Injecteur de chariot élévateur-LPG Nikki 16600-GS17B Fabricant d'équipement d'origine (OEM) - Nouveau
0.1/5

€ 522.53

hot
Hopkins Towing Solutions FloTool 10111/6 Injecteur Mixmizer
3.5/5

€ 34.72

Hopkins Towing Solutions FloTool 10111/6 Injecteur Mixmizer
3.5/5

€ 34.72

hot
FPE - Injecteur de chariot élévateur Assy 1KD Denso 23670-Ul010 Orcu Original Equipment Manufacturer (OEM) - Nouveau
0.1/5

€ 833.73

FPE - Injecteur de chariot élévateur Assy 1KD Denso 23670-Ul010 Orcu Original Equipment Manufacturer (OEM) - Nouveau
0.1/5

€ 833.73

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu