Jonard Tools WTL-12, Gabarit de boîte murale et niveau pour les anciennes boîtes électriques de travail, Modèle de mur bleu Niveau pour les anciennes boîtes de travail

Brand:JONARD TOOLS

3.8/5

€
39.29

Le gabarit et le niveau de la boîte murale Jonard Tools WTL-12 sont spécialement conçus pour découper les anciennes boîtes de travail simples et doubles. Le niveleur de gabarit mural est parfait pour s'assurer que les boîtes sont à niveau à chaque fois. Ce niveau de gabarit mural présente les caractéristiques suivantes : les niveaux intégrés aident à positionner parfaitement le gabarit, de larges bandes de protection en caoutchouc maintiennent le gabarit en place et évitent de rayer le mur, fonctionne avec les boîtes simples Carlon B114R et B12R, les boîtes doubles Carlon B225R, Plaques basse tension Carlon SC100RR, boîtiers Arlington Industries LVL1 et LVL2 et de nombreuses autres marques de boîtiers simples et doubles, et trous de vis ajoutés pour le maintenir en place pour une utilisation mains libres. Dimensions de la découpe simple : 2 1/4" x 3 5/8", dimensions de la découpe double : 4" x 3 5/8".

Montant

Ajouter au panier Acheter maintenant

EAN: 0811490017641

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Accessoires pour outils oscillants, Lames,

Compatibilité universelle : fonctionne avec les boîtes simples Carlon B114R et B12R, les boîtes doubles Carlon B225R, les plaques basse tension Carlon SC100RR, les boîtes Arlington Industries LVL1 et LVL2, et de nombreuses autres marques de boîtes simples et doubles. FONCTION PRATIQUE : Trous de vis ajoutés pour le maintenir en place pour une utilisation mains libres. FONCTIONNEMENT SÉCURITAIRE : de larges bandes de protection en caoutchouc maintiennent le gabarit en place et évitent de rayer le mur. NIVEAU PRÉCIS : les niveaux intégrés aident à positionner parfaitement le modèle et à garantir que les boîtes sont à niveau à chaque fois. Utilisation polyvalente : conçu pour les anciennes boîtes de travail simples et doubles pour un montage horizontal et vertical.

Country of Origin	China
Item model number	WTL-12
Manufacturer	Jonard Tools
Product Dimensions	0.84 x 4 x 3.63 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Tony honeycutt

Great product just one thing

They gave us a hole for top center but not side center . I was using the level at first and seen it was not center. So after drilling a hole on side it’s now a must have tool . Ty

Scritto da: Zane

Electrician must have

Use this all-most every day for work. EVERY electrician must have one. Thank me later

Scritto da: James J. Pijor

This thing is awesome.

I’m removing all of the “self contained” receptacles and switches from our manufactured home and replacing them with real stuff which includes all the boxes. The bubble is accurate and is a time saver.

Scritto da: Brandon Hann

Works perfectly!

Of course I would buy this only AFTER doing a bunch of outlet installs! This takes all the guess work out of measuring hole sizes and making sure they're level. It's one of those simple tools that just works and makes the job so much faster than doing it manually.

Scritto da: LA-OM

Easy to use - gets you 98% of the way there

This works really well for PVC old work boxes and low-voltage mud rings. It's not quite right for fiberglass old work boxes, but you just need to add a millimeter or two when cutting to fit a fiberglass box. The little level has saved me a bunch! Worth keeping in your bag if you install a lot of cut in boxes.

Scritto da: Buyer

Great product!

This is a great product at a cheap price can beat it good but ????

Scritto da: Wade Crawford

Old Work Installation Hero

I don't do a lot of installation in new construction so this allows me to do very easy installation of Network Drops and have them level and not having to worry about having any hole visible when a faceplate is installed. Good for double boxes as well, typically not used in my scope of work but have used it a few times for double-gang installations that need a 4x4 or similar high volume connection for a small space.

Scritto da: Dean R Berman Jr

Just a few mm too small for high voltage old work boxes

The size of these are just a hair too small to fit high voltage old work boxes. I used the 2-gange and the 1-gang, and when I put the work box in place, it didn't fit. When I gave it a little force, it popped the back of the drywall through and made my 1-gang about 1.5in too large. I had to put in my own backer for it. The width seems to be "snug", but the height isn't right, this needs to be taller by at least 6mm in total. Not a complete loss, but I am pretty disappointed with it.

Scritto da: P G

Worth the money!

This template ended up making a bigger difference than I thought it would! It was so easy to use it was worth the money. Even for just one project! We moved into an older house. We wanted to install a hardwire network so that we're not relying entirely on WiFi. Not only does this template make it easier to create level gang holes in a wall, it became very useful while planning where those cutouts should be! This made the process easier throughout the project.

Scritto da: Mark Adams

Fantastic, saved me a lot of time.

I just used this for the first time on a big job. Used it to level and cut a lot of low voltage boxes for cat 6 cable runs. Let me tell you, this saved me a lot of time over my old methods of tracing boxes using a small hand level. What a great little tool, I am very glad i picked it up. The low gang boxes also fit a lot better than the tracing I used to do using the box. Fantastic little item. Will be using it again on future installs.

Scritto da: David

Do the job

Precise