0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Koehler Enterprises KE12BX Boîte de 10 colliers de serrage (taille SAE 12), Argent

Brand:Koehler Enterprises

3.6/5

€
25.10

Les pinces à vis sans fin Koehler de type F sont conçues avec précision pour fournir des performances fiables et durables dans la plupart des applications domestiques, automobiles et industrielles standard. Ces pinces polyvalentes et polyvalentes sont dotées de bandes de 1/2 pouce fabriquées en acier inoxydable de la série 300 pour une résistance maximale à la corrosion par le sel et la plupart des produits chimiques. Le boîtier et la vis à tête hexagonale 5/16 sont tous deux fabriqués en acier au carbone plaqué pour des performances à haute résistance sous tension. Toutes les pinces Koehler sont fabriquées pour respecter ou dépasser la norme SAE J1508. Cette boîte comprend 10 pièces de colliers de serrage de taille SAE 12 avec une plage de serrage de 1/2 pouce à 1 - 1/4 pouces.

Montant
Ajouter au panierAcheter maintenant

EAN: 0660243300406

Catégories Industriel et scientifique, Hydraulique, pneumatique et plomberie, Raccords, Serrures, Colles à vis sans fin,

Polyvalent et facile à utiliser et à entretenir. Convient à pratiquement toutes les applications de serrage. Idéal pour l'automobile, l'entretien ménager, la plomberie, les applications industrielles et marines. Taille SAE 12, plage de serrage de 1/2 pouce à 1 -1/4 pouce (1,43 à 3,1 cm). La bande en acier inoxydable de la série 300 offre une résistance maximale à la corrosion par le sel et la plupart des produits chimiques.
Brand Koehler Enterprises
Brand ‎Koehler Enterprises
Color Silver
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 2,052 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.3 x 3.3 x 3 inches
Item model number ‎KE12BX
Item Weight 0.01 Ounces
Item Weight ‎0.01 ounces
Manufacturer ‎Koehler Enterprises
Manufacturer Part Number ‎KE12BX
Material Stainless Steel
Model ‎KE12BX
Product Dimensions ‎3.3 x 3.3 x 3 inches
Style Box

3.6

10 Review
5 Star
76
4 Star
14
3 Star
5
2 Star
1
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: John C
Fixed my dishwasher/air gap overflow problem
After a recent install, my air gap was spewing water on to my kitchen counter. My install requires a bend on the hose that runs from the air gap to the disposal. I noticed the hose was pinched/collapsed at the middle of the bend. I didn’t want to add a 45/90 degree fitting to add potential leak spots. Instead, I slid two of these over the hose and tightened them just enough to force the rubber hose to stay true/circular. Problem solved.
Scritto da: Country Boy
High quality at a affordable price.
Bough 10 hose clamps to fix my power steering hose at a very cheap price. I did not expect much until I received it. WOW! This is high-quality stainless steel, not Harbor Freight junk. It holds well. I tested it, trying to overtight it, but it won't budge. I just can't tighten it anymore, unlike another brand clamp that pops off. I will remember this seller, and come back if I need another size.
Scritto da: Ron Bank
Quality!
Perfect!
Scritto da: D. G.
Review for size SAE 10
This fairly review applies only to SAE 10 clamps. I have these Koehler brand clamps in several sizes. The SAE 10 that I recently purchased are working fine but have a shorter worm drive housing compared to the higher end Ideal / Ideal - Tridon clamps. In general, the biggest difference between this brand and the Ideal clamps is in the worm drive housing. It's a little bit more robust in the Ideal clamps. The metal type used in the housing and screw also appears to be different. I don't think the Koehler clamps use SS for the housing or screw. Regardless, I haven't had any issues with these clamps in this size or any other and I look for this brand if I'm looking to purchase several to have on hand as, in my experience, they are better than some of the off-brand clamps that I have come across. But it is notable that the SAE 10 clamps have a shorter worm drive housing which logically translates to the possibility of a shorter worm drive gear and therefore, potentially, less secure clamping than the Ideal or other more highly regarded brands. In the other sizes of clamps that I have in this Koehler brand, the worm drive housings are about the same length as those of the Ideal / Ideal-Tridon clamps that I have. Again, I did not have any issues with these clamps in terms of performance however, for peace of mind if for nothing else, I did replace this SAE 10 size Koehler clamp with an Ideal brand clamp in one, very critical application.
Scritto da: Sue
Exactly what I needed
Exactly what I needed. What more is there to say?
Scritto da: samershaya
good products
great products at the best service , thank you
Scritto da: WESSONMAN
HOSE CLAMPS FOR BROKEN FLAG POLE
I put 4 onto my broken pole. the clamps HELD!!! THE POLE....DID NOT!!!!!!!!! THANX ED BASS US ARMY VET RETIRED
Scritto da: ArmbaR
Keeps my hose in check
Good deal x12 under $6.
Scritto da: Robin W.
as described
no surprises. work like they should good price!!
Scritto da: Cliente de Amazon
Muy buen producto
Su construcción, solida y práctica.

Produits connexes

hot
Koehler Enterprises KE12BX Boîte de 10 colliers de serrage (taille SAE 12), Argent
3.6/5

€ 25.10

Koehler Enterprises KE12BX Boîte de 10 colliers de serrage (taille SAE 12), Argent
3.6/5

€ 25.10

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu