Lampe Repta-Clamp de Fluker avec interrupteur pour reptiles (emballage peut varier) 8,5 pouces

Name: Lampe Repta-Clamp de Fluker avec interrupteur pour reptiles (emballage peut varier) 8,5 pouces
Brand: Fluker's
SKU: 0611102118113
Price: 49.99 EUR
Availability: InStock

Brand:Fluker's

3.7/5

€
49.99

Cette lampe à dôme de 8,5 de diamètre est fabriquée en aluminium peint de gros calibre. La douille en céramique peut être utilisée avec des ampoules à incandescence, des émetteurs de chaleur en céramique et des ampoules fluorescentes compactes. Évalué jusqu'à 150 watts.

Montant

Ajouter au panier Acheter maintenant

EAN: 0611102118113

Catégories Fournitures pour animaux, Reptiles & Amphibiens, Éclairage de l'habitat,

Dispose d'un interrupteur marche/arrêt pratique pour une utilisation facile. Des pinces de sécurité sécurisent la lampe qui se fixe facilement au rebord de tous les terrariums. Les douilles en céramique sont conçues pour les ampoules à incandescence et les émetteurs de chaleur en céramique. La lampe à dôme de 8,5 de diamètre a une puissance nominale de 150 watts et est fabriquée en aluminium peint de gros calibre. Cette lampe approuvée UL/CUL est parfaite pour les reptiles qui aiment se prélasser.

Brand	Fluker's
Bulb Base	E27
Bulb Shape Size	E25
Country of Origin	USA
Is Discontinued By Manufacturer	No
Item model number	27000
Light Type	Incandescent, Fluorescent
Manufacturer	Fluker Labs
Product Dimensions	9 x 9 x 7 inches; 1 Pounds
Wattage	150 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: les ruefenacht

Great product

Purchased 3 heat lamp holders as well as the heaters that fit them. Excellent products. Everything I was hoping for. Well made. Sturdy. Works great.

Scritto da: Kindle Customer

Great quality

Built well/ heavy design

Scritto da: B. chow

Great and sturdy holder

I am glad to find this sturdy, attractive and adequate holder for our pet turtle. It claps down well on the side of the turtle’s house not to worry about it falling off. Excellent quality and sturdiness. I would buy again and recommend.

Scritto da: Tatum

my bearded dragon loves it

works very well

Scritto da: Amazon Customer

clamp lamp

nice size, sturdy. The quality was good for the money.

Scritto da: Charli Jo

One came with dimmer other this one did NOT come with dimmer

These work well but get the one with the dimmer.

Scritto da: Repete

Very good

Very good.

Scritto da: Kali

Great

Works well I’ve had for a few months and works really well

Scritto da: Mother of Three

Does the job

I purchased 2 of these (on sale) to heat my pet hedgehog's bin cage with ceramic heat emitters. While these lamps work to keep my pet's enclosure at the right temperature range, I did encounter 3 issues with them. 1) Both domes arrived with slight dents (see photo). When I contacted Fluker's directly, they claimed that they package their lamps in such a manner that it shouldn't result in that type of damage. They suspected that they were dented during transport or by the distributor. Since I was bringing home my new pet soon, I didn't have time to deal with exchanging these via Amazon (especially since new ones might arrive in the same manner). I simply used some gentle pressure to push out the dents with my thumbs and reshape the dome. If I look carefully enough, I can still make out where the lamps got dented...but I'm more concerned with function over form with these clamp lamps. 2) The clamps on these lamps did not work for my setup. The sides of my bin cage were too thick and slippery and the lamps were too top heavy when the bulbs were installed. The weight caused the domes to slide and tip sideways, risking melted plastic bins. I had to DIY lamp stands (with weighted toilet paper holders and zip ties) to hold/stabilize the domes above the bin cage. 3) After testing the lamps out for only a few hours with 150-watt ceramic heat emitters, I noticed that both cords got charred near the ceramic base of the bulb fixture. When I contacted Fluker's about it, they said that I should not only avoid having the cord touch the metal dome (which I knew not to do), but also the ceramic base. They said that the visible charring shouldn't be a safety issue as long as the metal wiring wasn't exposed. This being my first experience with using heat lamps, I wish they had printed a warning or caution somewhere on the box as I would've taken more care to position/secure the cord properly had I known from the beginning. That being said, it is difficult to prevent any contact as the hole where the cord connects to the fixture is so narrow. All in all, these lamps work well enough for my purposes.

Scritto da: Liza

Perfect for my light weight grow light

This is much better quality than the clamp fixtures from Home Depot or the other ones on Amazon. It’s is easy to put together and clamps onto things well, but only works will a light weight bulb. I tried to use the heavy GE PAR38 grow light with it and the bulb was too heavy and the whole thing flopped down. (The photo is with a FEIT grow light bulb which is light weight).

Scritto da: Jason

Just What My Snake Needed

Used my last light hood with bulbs from 75-150 Watts for 6 years without knowing it was only rated to 50 Watts. It burnt out one day and thankfully I was there, and realized this was why! This new light hood with clamp is the same size of hood, but rated to 150 Watts! Perfect! Has been working perfectly, left on 24/7 in a terrarium, for the last 8 months. Thanks Fluker's!

Scritto da: WJ Hardy

Works as it should

We will see how long it lasts.. but it works well Just wish the power button was at least color coded LoL.

Scritto da: Stéphanie Sampson

Parfait

C'est la deuxième que j'achète, vu le bas prix j'étais hésitante mais au final c'est parfait, aucun point négatif à dire et ça peut supporter jusqu'à 150 watts donc parfait pour mes ampoules en céramique!!! Je recommande fortement et en plus c'est la moitié du prix des autres ????