Legrand/On-Q AC101001 Support Basse Tension 1 Gang, Retrofit, Gris 1 Gang RetroFit

Name: Legrand/On-Q AC101001 Support Basse Tension 1 Gang, Retrofit, Gris 1 Gang RetroFit
Brand: On-Q
SKU: 7241871126816
Price: 19.06 EUR
Availability: InStock

Brand:On-Q

3.7/5

€
19.06

DESCRIPTION DU PRODUIT Conçu pour être utilisé dans des ouvertures à un groupe, le support pivotant BT à un groupe est idéal pour les installations à basse tension telles que les plaques murales Keystone et les claviers audio. Destiné aux projets de rénovation, ce support s'installe rapidement et facilement. Le support dispose d'un dos ouvert et utilise des supports pivotants métalliques fiables pour serrer le support en place. Détails du produit : couleur : gris. Matériau : alliage coulé. FABRICANT Conception à un seul groupe pour les applications de modernisation

Montant

Ajouter au panier Acheter maintenant

EAN: 7241871126816

Catégories Outils et amélioration de la maison, Électricité, Boîtes électriques, Conduits et raccords, Brackets,

CERTIFIÉ : Le support basse tension On Q 1 Gang est certifié conforme à la norme UL. Supports de tension les plus vendus : le support de tension 1 Gang est le meilleur choix d'Amazon et l'ouverture spacieuse peut accueillir de grands appareils et facilite le processus de câblage. TAILLE ET COULEUR DISPONIBLES : le support basse tension est disponible dans une taille différente : trois gangs (lot de 2), un gang, trois gangs, deux gangs. Sa dimension est de 10 x 10 x 8 pouces. La couleur verte distingue facilement l'ouverture pour les produits basse tension. Facilité d'alignement : dans les supports de tension, le plastique rigide conserve sa forme pour faciliter l'alignement lors de l'installation et les languettes stabilisatrices latérales fiables le maintiennent aligné avec le goujon. SUPPORT DE TENSION: Le support basse tension 1 Gang a des supports pivotants métalliques pratiques, des supports de serrage en place.

Batteries Included?	‎No
Batteries Required?	‎No
Certification	‎UL
Color	‎Green
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 306 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎AC101001
Item Package Quantity	‎1
Item Weight	‎0.32 ounces
Manufacturer	‎On-Q
Part Number	‎AC101001
Product Dimensions	‎12.99 x 5 x 5.98 inches
Size	‎1 Gang
Style	‎RetroFit
Warranty Description	‎12 months from date of purchase

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Ben S.

Easy to install

Super easy to install, just cut a hole in the drywall and install!

Scritto da: Cullen Wainscott

Good value.

Much better deal than the orange ones you see at depot plus I like the metal clamps versus the plastic.

Scritto da: Brisk2000

Work Well and Do the Job!

I bought a pair of these plastic brackets because they were priced right (better than Home Depot and Lowes). The units I received were 'gray,' not 'green' as advertised. Not a big deal. The reason for my 4 rating is that there are no guide holes near the corners of the frame to help you mark the surface to make a precise cutout. This added a little unnecessary work for me. Also, the top & bottom holes for cover screws were a bit undersized, requiring a little more effort to drive those small screws in. But overall, they work just fine and I would buy them again.

Scritto da: PresumablyMe

Good Bracket. Cutout Template 2.25" x 3.75"

The Legrand 1-gang low voltage bracket itself is good for the intended use. As another reviewer pointed out, it has metal "clamp feet" rather than plastic. And the price was great. For those asking about a cutout template, I made my own on a sheet of paper, easy to do. Requires a pencil or pen, and a ruler/straight edge. And a minimum of one eyeball, Two hands are helpful too :-) For the template, a simple rectangle 2-1/4" wide by 3-3/4" high gives you 1/32" 'wiggle room' on each side of the resulting hole which is plenty. If you want to be EXACT, make the rectangle 2-3/16" x 3-11/16" instead. On one of the long sides of my rectangle I drew a long line inches pass the t=op and bottom cutout lines to act as a wall positioning index line. I also drew a line parallel to the short sides, at the 1-7/8" mid point of the long side. Basically a cross on top the cut out lines. On the wall, I drew a horizontal line, marking the middle of the long side. I also drew a long vertical line marking one vertical edge of where the hole will be. I then taped my cutout pattern so the middle and vertical lines aligned with the lines on the wall. Using my vibrating multi-tool I cut along the pattern lines, inside the line rather than outside the line as the vibrating blade can easily add an extra 1/32" to each side of the opening which I did not want. Result, a hole just slighting larger than this bracket just in case I needed to adjust it's position a little for level.

Scritto da: Amazon Customer

No prob bob

All good. Works as advertised. Exactly what I needed. Less than $2 and shipped to my door. Incredible

Scritto da: Wibbo

Good value; well made; but hard to install -- needs a paper wall-hole template!

Well made and good value for the price, but it would be a five-star product it a wall hole / cutout template was included in the package. It might cost a penny or two more, but it would make installing the product faster and easier with far fewer errors or incorrectly sized holes. If that's too much, include a link for one or a PDF file in the product description so users can print their own. For reference, cutout dimensions are: 2-1/4 inches wide by 3-3/4 inches high with a small variance. There is very little room for error on these sort of old-work boxes, so measure two-three times before cutting.

Scritto da: Carol

Good for hiding speaker wire

We used these to run speaker wire inside the walls. Great product!

Scritto da: andrey55

Good

Good enough quality