Manomètre numérique, testeur de pression d'air et de gaz, manomètre différentiel à double port, grand écran LCD avec rétroéclairage Klein Tools ET180

Brand:Klein Tools

3.6/5

163.43

Le manomètre différentiel numérique ET180 de Klein Tools mesure la pression d'air et de gaz pour le port 1, le port 2 et mesure le différentiel entre les ports. Basculez facilement entre les unités : inH2O, bar, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 et cmH2O. Le grand écran LCD rétroéclairé affiche les valeurs minimales, maximales et moyennes. Aimant à l'arrière pour un fonctionnement mains libres. Depuis plus de 160 ans, Klein Tools fabrique des outils à main de qualité professionnelle de qualité supérieure qui offrent les performances, la durabilité et la précision nécessaires pour bien faire le travail. Notre famille d'ingénieurs, de travailleurs et d'artisans continue de mettre six générations d'expertise dans chaque outil que nous créons en utilisant uniquement des matériaux de la plus haute qualité, une fabrication supérieure et en maintenant la fabrication aussi près de chez nous que possible. Klein n'est pas seulement le nom de notre entreprise, c'est aussi notre nom de famille. Et puisque nous sommes une entreprise américaine familiale et gérée par une famille, vous savez que vous pouvez compter sur nous pour être là demain. Klein Tools ne fabrique pas seulement d'excellents produits, nous fabriquons d'excellents produits qui répondent aux exigences des professionnels qui les utilisent tous les jours... Depuis 1857.

Le grand écran LCD rétroéclairé permet une visualisation facile dans des conditions de faible luminosité et affiche les valeurs lors du basculement entre le minimum, le maximum et la moyenne. ONZE UNITÉS MESURÉES : Basculez facilement entre inH2O, bar, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 et cmH2O. L'AIMANT FORT AU DOS sécurise le manomètre pour un fonctionnement mains libres. Surveillez et résolvez les problèmes dans les systèmes HVAC avec une plage de +/- 60 inH2O et une précision à pleine échelle de +/- 1,5 %. MESURER la pression STATIQUE ET DIFFÉRENTIELLE à partir de deux orifices dans les systèmes d'air et de gaz.
Batteries 3 AAAA batteries required. (included)
Brand Klein Tools
Country of Origin China
Department Unisex-Adult
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number ET180
Item Weight 5.92 Ounces
Manufacturer Klein Tools
Material Blend
Product Dimensions 1 x 1 x 1 inches; 5.92 Ounces

3.6

9 Review
5 Star
75
4 Star
15
3 Star
6
2 Star
2
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Pat Thompson
Magically repaired my heater
Had a problem with my heater tripping from the pressure sensors not seeing enough draft. Got this to diagnose. Hooked it up with the 1900 feet of hose it comes with and measured pressure. Exactly where it’s supposed to be. Great. Waited around for the fault condition to occur: IT HAS NEVER OCCURRED AGAIN in 3 1/2 months! I, uh, just left it plumbed in and backed slowly away. Problem solved!
Scritto da: james
Case sucks.
I started with some other brand which did a decent job but with the Klein I can measure differential pressure which is much better. Could use at least one barb fitting for the price I paid for this. That 'other brand' came with one and only cost $39.
Scritto da: Diane Henry
Did the job for testing self installed heat pump.
Works well
Scritto da: Tim
Great manometer.
Excellent meter with a string magnet on the back and a clear screen on the display. I use this to check the pressure of my LP system on my RV. I really like the magnet, as it allows me to attach it to the side of the propane tank as I'm taking a reading.
Scritto da: donald foglesonger
ok
not very accurate
Scritto da: Scott
Tiny hose
The manometer seems to work great. The hose is too small around and soft for what I need on gas valves.
Scritto da: Gary Gendel
Make sure you have a snug fit with your tubing
This is a basic unit that is simple to use and easy to read. I needed it to calibrate an ERV. I originally had a very hard time getting a stable reading and even using some stuffing around the tubing to make a better seal didn't help. I bought some natural latex tubing that had a better seal which made things much better and repeated readings were stable. The magnet in the back was very handy to affix the meter in a good location so my hands were free to make the adjustments. I have a second and bigger ERV to install but I'm confident that calibration will go smoothly. If I had to complain about something, it would be the case. It's pretty cheaply made and doesn't really have a good layout for the meter and tubing. But it does it's job.
Scritto da: Syed
Not the one you’re looking for
I bought this to diagnose the Honeywell gas valve on my furnace. Felt that Klein was name brand to go for. Unfortunately, this manometer doesn’t come with any barbed adapters to connect to plugs on the gas valve. I needed a 1/8 in MIP to barb adapter, which was impossible to find at local hardware stores. It’s a cheap piece they could have thrown in to make a complete kit. Incredibly frustrating that it was not included.
Scritto da: Wrench
Awesome Tool
This little tester works like a charm!

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array