Nilight 12PCS 12V Bleu Rond Interrupteur LED à Bascule 20A 12V DC On/Off SPST pour Voiture Camion Rocker On-Off Control, 2 Ans de Garantie 12Pcs Interrupteur Rond

Brand:Nilight

3.5/5

25.30

Contenu de l'emballage : 12 interrupteurs LED à bascule ronds bleus. Installation facile : l'interrupteur rond marche-arrêt est facile à installer, ce qui est juste une configuration directe, et aucun travail supplémentaire requis, notre interrupteur est livré avec une fente en trou de serrure pour éviter toute rotation indésirable. Largement utilisé : il s'agit d'un interrupteur à bascule LED rond, il peut fonctionner dans toutes les voitures et autres avec une source de 12 volts CC. Design parfait : conçu pour connecter et déconnecter un circuit électrique DC12V 20A à volonté, SPST : contrôle ON-OFF ; Conception à 2 pôles (On/Off), 3ème pôles avec LED à connecter à la terre. Les lampes fluorescentes s'allument lorsque l'interrupteur est allumé. Protection de sécurité : cette commande d'interrupteur à bascule pour camion utilise des contacts en argent plaqué cuivre, a une bonne conductivité électrique et utilise des matériaux de haute qualité et un boîtier ignifuge pour une sécurité élevée.

Contenu de l'emballage : 12 interrupteurs LED à bascule ronds bleus. Installation facile : l'interrupteur rond marche-arrêt est facile à installer, ce qui est juste une configuration directe, et aucun travail supplémentaire requis, notre interrupteur est livré avec une fente en trou de serrure pour éviter toute rotation indésirable. Largement utilisé : il s'agit d'un interrupteur à bascule LED rond, il peut fonctionner dans toutes les voitures et autres avec une source de 12 volts CC. Design parfait : conçu pour connecter et déconnecter un circuit électrique DC12V 20A à volonté, SPST : contrôle ON-OFF ; Conception à 2 pôles (On/Off), 3ème pôles avec LED à connecter à la terre. Les lampes fluorescentes s'allument lorsque l'interrupteur est allumé. Protection de sécurité : cette commande d'interrupteur à bascule pour camion utilise des contacts en argent plaqué cuivre, a une bonne conductivité électrique et utilise des matériaux de haute qualité et un boîtier ignifuge pour une sécurité élevée.
Brand Nilight
Contact Type Normally Closed
Country of Origin China
Item model number 1
Manufacturer Nilight
Material Plastic
Mounting Type Snap-In
Product Dimensions 1 x 1 x 1 inches; 2.89 Ounces
Terminal Spst

3.5

11 Review
5 Star
67
4 Star
21
3 Star
8
2 Star
2
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: JBC
They all worked
Little blue light comes on when switch is on. Nice touch. These were at such a low price point I worried about the quality but they have been installed and used for some time now and no problems at all. I used them in the lower part of my BMW control stack to control two 12 volt power outlets I installed.
Scritto da: Reviewer
These switches look and feel great
Installed these switches in numerous locations in my ambulance to RV conversion.... they look sharp and have a nice tactile feel to them. They install neatly and securely in a 13/16" hole..... Very pleased with the finished product.
Scritto da: Pappashawn
Basically, item is as discrimination stated
Threaded mounting point is a bit short for mounting through plastic panels (i/e: lower dashboard panels.) The light is very bright so, you will NOT have to worry to remember to shut it off. Actually has the connection format labeled on the back of switch which is nice and foolproof.
Scritto da: Daniel Webb
Works great and looks good
Used this in my boat for lighting I added. It worked great, was easy to use, and looks good to. You will need to drill a 1/2" hole for mounting.
Scritto da: MetalEd
Lugs Are Loose
These switches look good, are easy to install once you drill the correct size mounting hole. The rocker feels sturdy and gives a satisfying click. Every LED and switch worked out of the box and none were DOA. Now for the bad: mainly, the lugs are loose and not located by the switch body very securely. If you use push on connectors, use caution when pushing these onto the lugs. It only happened to the grounding lugs (which are untinned) and ultimately I took a small slotted screwdriver and opened the push on connectors then squeezed them with needle nose pliers to tighten them some. It was ridiculously easy to move the ground lugs. The rest seem more solid, but, I was super careful just the same. No way to tell for how long, but, the switches still work after the lug pushes in. Once it moves, though, it remains loose feeling. Can't imagine those will last like that. On a silly note, I just realized I only received 10 switches in a pack that should have contained12. Had I not come here to make this review I might never have known.
Scritto da: mikeeeee
Great bundle with minor issues
As other reviews have stated, the LED seems to be on the opposite side of the switch compared to similar styles of switch. This doesn’t effect function at all, it’s just a little weird. What I found to be a bit obnoxious is these switches don’t quite fit in a 3/4” hole. They ALMOST fit, but a 3/4” hole will have to be lightly filed to get the switch to seat. Can’t really complain too much considering the cost vs. quantity… but the issues I have with these switches wouldn’t necessarily effect the cost. I’d still buy them again.
Scritto da: ALLAN EMTER
Customer service and quality
They look good and work well not very water proof
Scritto da: Rhonda Foster
Plastic nut on back is Too losse and breaks when tightened
Cheap plastic
Scritto da: cj2121
Work as they should
A bit surprised that all pieces worked, usually with bulk orders a few will be doa
Scritto da: Rodolfo A Valencia P
Muy bien hechos fáciles de instalar
De buena calidad con relación a su precio y muy sencillos de instalar
Scritto da: Jorge Gonzalez
Buen producto
Muy buen producto los utilizo para mi trabajo

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array