OTC (522 Grand extracteur d'engrenages et de poulies

Brand:‎NOCO

3.8/5

129.13

Avec l'extracteur d'engrenages et de poulies 522 d'OTC, vous pouvez facilement retirer une large gamme d'engrenages, de poulies ou d'autres pièces qui ont des trous taraudés. Il est simple à utiliser et facile à ranger. La valeur est au cœur du portefeuille d'outils et d'équipements OTC. Qu'il s'agisse d'une simple réparation ou du problème de maniabilité le plus complexe, ces outils primés résolvent universellement les problèmes plus rapidement et à un meilleur rapport qualité-prix que toute autre gamme de produits disponibles. Qu'il s'agisse d'un outil spécialisé ou d'un équipement de service unique, OTC fournit les meilleures solutions aux défis de l'entretien automobile moderne tout en augmentant la productivité des techniciens et les bénéfices de l'atelier.

EAN: 0031113145821

Catégories Automobile, Filtres à air, Tireurs, Ensembles d'arracheurs,

Similaire aux Ford D80L-522-A et 303-D025. Convient à toutes les vis d'assemblage jusqu'à 1/2 pouce de diamètre. La vis de forçage mesure 3/4"-16 x 11-5/8" de long. Étaler de 2 pouces à 7-3/4 pouces; bloc est de 8-1/4 pouces de large. Avec l'extracteur d'engrenages et de poulies 522 d'OTC, vous pouvez facilement retirer une large gamme d'engrenages, de poulies ou d'autres pièces qui ont des trous taraudés.
Brand ‎NOCO
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 363 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎522
Item Weight ‎4.1 pounds
Manufacturer ‎OTC
Manufacturer Part Number ‎522
Model ‎OTC
OEM Part Number ‎522
Product Dimensions ‎3.1 x 2.2 x 13.2 inches

3.8

13 Review
5 Star
86
4 Star
8
3 Star
3
2 Star
1
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Amazon Customer
geat tool
good tool
Scritto da: KSBird2005
Tough.
This is a great option for pulling motors and gearboxes off of shafts. Using gear pullers never worked well for this application due to uneven shapes and lack of grab area. With this I can just grab a couple bolts and pull off very stubborn motors.
Scritto da: F. Rotello
Good Puller
I read some of the 1 star reviews and honestly I can not see what they were complaining about. This tool cost me $60 and is WAY better than a $10 one you buy at "China-Tools-R-Us"... if you get my meaning. The Tool is square and the bore is straight, NONE of the $10 pullers will share those traits. Yes the threads are a little rough, however all you have to do is put a little oil on the threads and spin the extractor rod all the way through and it will smooth it out. If you want flawless go buy an Enerpac a $200 to $300, that's what my Industrial service company uses. Otherwise your lawnmower flywheel will never know the difference. This is a great tool for a homeowner or auto shop.
Scritto da: Amazon Customer
Must have tool
I use this puller for all sorts of task.
Scritto da: Mike Asher
Heavy Duty Gear puller
I attached this puller and about 1 good Complete turn it literally jumped off the shaft
Scritto da: Scott Whitehead
Good puller.
Cheaper than Snap-On and seems to be the same quality. I use it at least once a week pulling differential yokes on tractor trailers to do pinion seals.
Scritto da: Gary E. Hoenig
Did the tough job
Did the tough job after I had tried everything else. Glad to have this tool in my arsenal.
Scritto da: Matthew Rushing
Indestructible puller
Used it to pull the blade holder assembly off a 285 Bush Hog mower. Had tried everything, even a 12 ton hydraulic puller wouldn't budge it. Rigged this up to it using a couple of Grade 8 1/2 inch bolts, using a 1 inch air hammer (this thing has like 2500 lbs. of torque), heat, and a 10 lb. maul finally broke it loose. Bent the bolts, pulled the 1/2 inch nuts right off the threads, but this puller didn't break and to my amazement the puller bolt didn't even bend. Best 50 bucks I ever spent.
Scritto da: MCatSHF
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
Scritto da: Amazon Customer
great tool
right tool for the job. worked great time saver
Scritto da: Randy Frattinger
Good Quality
The tool is as described and works great.
Scritto da: Evan
Works well
Performed as needed. Would be nice to have a swivel end on the threaded rod
Scritto da: Doug Burton
Built for tanks
Wow.... what a beast. If this doesn’t work. Nothing will...

Produits connexes

hot
Lisle 40100 Extracteur de moyeu Noir
3.7/5

€ 169.40

Lisle 40100 Extracteur de moyeu Noir
3.7/5

€ 169.40

hot
Extracteur ESSIEU Arrière Toyota
3.3/5

€ 493.77

Extracteur ESSIEU Arrière Toyota
3.3/5

€ 493.77

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array