PacTool SS204 Snapper Shear - Coupeuse électrique pour revêtement en fibrociment - Outils électriques professionnels 1

Name: PacTool SS204 Snapper Shear - Coupeuse électrique pour revêtement en fibrociment - Outils électriques professionnels 1
Brand: PacTool
SKU: 0645646204001
Price: 220.59 EUR
Availability: InStock

Brand:PacTool

3.6/5

€
220.59

DESCRIPTION DU PRODUIT Préparez-vous à écraser votre prochain projet de revêtement avec notre coupeuse électrique révolutionnaire SS204 Snapper Shear. Parfaites pour les professionnels, les bricoleurs et les amateurs, ces cisailles à cordon de 110 volts sont spécialement conçues pour couper le revêtement en fibrociment de 5/16 po. Nous avons combiné notre célèbre tête de coupe usinée avec précision avec un moteur compact de 4,8 A de 3/8 po, ce qui rend cet outil idéal pour les projets à petite échelle. Nos outils électriques de coupe sont équipés de lames en acier à outils solides réversibles et entièrement remplaçables, avec la capacité de supporter 20 000 pieds linéaires, vous donnant la flexibilité de travailler sur jusqu'à 15 maisons. Vous pouvez utiliser cet outil de rénovation domiciliaire sur les revêtements pré-peints, et la coupe de précision vous permet de travailler rapidement et efficacement sur tous vos travaux et projets. Avec pratiquement aucune poussière en suspension dans l'air provenant de l'action de cisaillement, cet outil rend n'importe quel travail plus efficace et plus sûr pour tout le monde sur le site, garantissant un chantier compatible OSHA. Chez PacTool, nous sommes connus pour notre gamme exceptionnelle de produits extérieurs dans le secteur de la construction, de la rénovation et du remodelage et sommes fiers de fournir des solutions exceptionnelles qui aident à réduire la fatigue et la frustration des artisans et des bricoleurs. DU FABRICANT La nouvelle cisaille à parement en fibrociment Snapper Shear SS204 combine notre célèbre tête de coupe usinée avec précision avec un moteur d'entraînement compact 3/8. Après des tests rigoureux sur le terrain, nous sommes fiers d'offrir le SS204 comme une alternative compétitive à notre gamme de produits SnapperShear éprouvée par les entrepreneurs. Équipé de la même lame en fibrociment super résistante, vous aurez le même temps et l'argent pour chaque coupe sans poussière.

Montant

Ajouter au panier Acheter maintenant

EAN: 0645646204001

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils électriques, Cisailles et grignoteuses, Cisailles,

PACTOOL : fiable depuis des décennies, nous sommes les leaders dans les conceptions spécialisées de construction, de rénovation et de remodelage. Notre gamme de produits de pointe inspire les artisans et les bricoleurs à travailler plus intelligemment, à mieux mesurer et à réparer plus efficacement. CISAILLES INTELLIGENTES : Développé pour minimiser la poussière nocive en suspension dans l'air lors de son utilisation, ce produit permet aux travailleurs de couper et d'installer en un seul endroit. Cela augmente considérablement l'efficacité, le nettoyage et protège ceux qui travaillent sur site des particules dangereuses. PANNEAU DE CIMENT : Ce produit a été créé pour cisailler le revêtement de ciment plutôt que de le couper, en effectuant des coupes précises, rapides et constantes. Idéal pour une utilisation sur un revêtement pré-peint, coupez toujours les planches face vers le bas pour des bords parfaits, nets et finis lorsque vous utilisez cet outil de revêtement. OUTIL D'ENTREPRENEUR : Si vous devez travailler sur plusieurs maisons, ces cisailles électriques sont faites pour vous. Fabriqué avec des lames en acier à outils solides réversibles et remplaçables, cet outil de coupe peut supporter 20 000 pieds linéaires, ce qui équivaut à environ 15 maisons moyennes. OUTILS ÉLECTRIQUES : Nos cisailles à cordon de 110 volts sont conçues pour couper des parements en fibrociment de 5/16 pouces. La combinaison de notre tête de coupe usinée avec précision et d'un moteur compact de 4,8 A et d'un entraînement de 3/8 pouces rend cet outil de découpe idéal pour tout projet.

Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	SS204
Manufacturer	General Tools
Product Dimensions	14 x 13 x 4 inches; 1 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Randy Claypoole

Love this product

It was the first time I worked with Hardie Board. It cuts with ease and produces nearly no dust in comparison to cutting with a saw and blade. Highly recommend.

Scritto da: Nagda h.

Buen producto

Si hace su trabajo

Scritto da: Jason N.

Not a bad product

I just finished siding about 2500 sq ft of siding and wanted to write a review after I was finished so I could give an honest review. I used both the shears and saw blade designed for the Hardy fiber cement lap siding. The shears were easy to use and didn't produce as much dust which seems to be one of the big selling points. I liked not having to put mask and glasses on everytime I used the shears. You have to get used to where it cuts, there were a couple times at the start where I had to either re-cut or get a new board out simply because I wasn't used to where the cut would be and was off by maybe a 1/4 inch or so, really no big deal. There were a couple times it seemed like it jammed but would start cutting again after a moment. The cuts it made were rougher than the saw though. When we wanted a smooth end cut we would use the saw blade because it produced a nicer, smoother cut. Most of the time it didn't matter because we were caulking over those cuts but there were a couple times we had to make a cut that wouldn't be caulked over so the saw blade was nice to have. If we had to rip a board we would use the saw blade most of the time because it would be a little faster but it did really kick out the dust. We also had to use the saw blade for the trim as the shears won't go through anything that thick. I would definitely recommend the shears as they were easy to use and most of the time very quick. They didn't produce the dust and held up nicely on the 2500 sq ft of siding we put up. I did like having the saw blade though as well. We only purchased one saw blade which lasted the whole project.

Scritto da: Amazon Customer

Obviously used tool

Unit was jam packed with fiber board debris! Looks like one piece was replaced because the broken part was included. I wasn't aware I bought a used item but I'm sure it should be fine.

Scritto da: D. Porter

Works Great if Used Properly

This is made very similarly to my old Porter Cable shears that I wore out. I saw some negative reviews about bad cuts. I suspect that it is mostly bad technique. As long as you keep the bottom of the stationary blade firmly in contact with and parallel to the siding, it cuts cleanly and accurately. If you try to lift the back of the tool, like to turn corners or for any other reason, it will shred and delaminate the siding at the cut and make a real mess. That's from someone having made literally thousands of cuts with this type of shear.

Scritto da: Kathy Curtis

A piece of cake!

After struggling with overpriced blades that kept binding up, I ordered this tool. I found it to be super easy to use. Other reviewers mention some binding or chattering. I had that too, then noticed the cord had sunk into my cut and was skewing the tension. No cord in the cut, no problem. Another person complained he couldn't see his cut line. If you guide the the cut curl back towards the tool, you can see fine. Another plus is that you can stop in the middle of the cut, then continue whenever you are ready. Did I mention the lack of dust? Not being covered in clouds of silica dust was amazing. Even though this tool is a one-trick pony, it was well worth the price for what it saved me in time, stress, and effort. I highly recommend this tool for making long cuts on 8x4 panels.

Scritto da: Amazon Customer

Great for Hardie Backer

I purchased these shears to cut Hardie backer board for three rooms (19 sheets). I cut mostly 1/4 inch and although it didn't recommend it I did cut some 1/2 inch (.42). The 1/4 inch cut like a hot knife through warm butter only slower. Lines are easy to follow in either direction except for the curl that comes around every eight inches or so. You can travel fast or slow as the trigger is variable speed. The tool is fairly heavy although most all the weight rest on the material while using. As long as you keep the tool resting flat on the cement board and cut fairly straight it cuts very smooth and produces very clean edge with almost no dust. It is only as noisy as a 1/2 drill and very easy on your body. Slam dunk for 1/4 material and although it will cut the 1/2 it is much slower and they do make one for the thicker material. For round holes and lines not straight buy a Bosch jigsaw blade ($10) for cement board and an oscillating jigsaw (harbor freight $30 before 20% off). After cutting 19 sheets of varying thickness cement board the shears show almost no sign of wear and preform as when new. If your body is beat up, older or you just don't like a noisy room full of cement board dust these shears are worth every penny. They made the hardest part of the project so much easier. Highly Recommend these shears!

Scritto da: budy

Works fantastic

I was worried that the 4.5 amp motor was not going. To be enoughbut it turns out that it actually has a 6.5 amp motor. This thing cuts right through the concrete fiber board like nothing. After a few cuts I had the hang of it. The best part is no dust. Update to this review. I have cut alot of cement board siding with it now and it is still working awesome. I will never cut another piece with a blade. No dust at all with this. It's even easy to cut an extra 1/8 if you cut it to long. I highly recommend these cutters.