Poolmaster 33440 Tuyau d'aspirateur de piscine enterré robuste avec manchette pivotante pour piscines enterrées, 1-1/2" par 40 pieds, neutre, bleu 40 pieds

Brand:Poolmaster

3.4/5

181.66

DESCRIPTION DU PRODUIT La collection d'entretien de piscine de Poolmaster offre une sélection généreuse de produits performants et conçus pour durer fabriqués à partir de composants résilients conçus pour garder votre piscine étincelante. Le tuyau d'aspiration enterré robuste est composé d'EVA flexible mais durable et d'un matériau non corrosif. Le brassard pivotant est intégré pour une maniabilité sans pli pendant le processus de nettoyage, tandis que la construction enroulée en spirale ajoute de la résistance, aide à la flexibilité et fournit un débit d'eau maximal. La résistance à la traction supérieure offre un fonctionnement résistant à l'écrasement. Le tuyau doit être utilisé avec une tête d'aspiration de piscine standard et un manche télescopique pour l'aspiration manuelle de la piscine uniquement et ne doit pas être utilisé avec des nettoyeurs de piscine automatiques. Le tuyau fonctionne mieux lorsqu'il est chaud pour maximiser la flexibilité. Mesure 1-1/2 pouce de diamètre x 40 pieds et est fabriqué aux États-Unis. Remarque : la taille de l'ouverture à l'intérieur des écumoires de piscine peut varier, de sorte qu'un raccord ou une plaque d'aspiration peut être nécessaire à l'intérieur de l'écumoire pour un ajustement plus sûr et une étanchéité à l'air du tuyau d'aspiration. DU FABRICANT Depuis 1958, Poolmaster est l'un des principaux fabricants de produits de rechange pour piscines et spas avec un engagement indéfectible envers la qualité, le service et la fiabilité. Poolmaster propose des produits dans six gammes de produits différentes : jardin et décoration, gonflables, flotteurs, entretien, natation et plongée, et jouets et jeux. Poolmaster - Nous rendons l'eau amusante !

Aucune unité disponible
Qualité professionnelle et fabriqué pour durer aux États-Unis ; mesure 1-1/2 pouce de diamètre sur 40 pieds pour la plupart des piscines creusées. Installation facile ; l'extrémité du brassard pivotant se connecte directement à la tête d'aspiration manuelle de la piscine et l'extrémité non pivotante se connecte à l'écumoire de la piscine. La construction enroulée en spirale crée de la force, de la flexibilité et un débit d'eau maximal ; résistance à la traction supérieure pour tuyau de piscine résistant à l'écrasement. Le tuyau du nettoyeur de piscine dispose d'un brassard pivotant pour une maniabilité sans pli ; Résistant aux UV et aux produits chimiques ; EVA flexible extrudé et poignets EVA poly-soudés. Non conçu pour fonctionner sur des nettoyeurs automatiques de type aspiration ou des robots nettoyeurs de piscine ; à utiliser avec un aspirateur de piscine standard et une perche télescopique pour l'aspiration manuelle de la piscine. Plastique.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Poolmaster
Certification ‎certified frustration-free
Color Blue
Color ‎Blue
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 2,156 ratings 4.4 out of 5 stars
Hose Length ‎40 Feet
Included Components ‎Hose only
Item Dimensions LxWxH 480 x 1.5 x 1.5 inches
Item model number ‎33440
Item Package Quantity ‎1
Item Weight 8 Pounds
Item Weight ‎8 pounds
Manufacturer ‎Poolmaster
Material Constructed with Durable Materials
Material ‎Constructed with Durable Materials
Part Number ‎PA00858-HS40
Product Dimensions ‎480 x 1.5 x 1.5 inches
Size ‎40-Feet
Style ‎Hose
Warranty Description ‎1 Year Warranty Against Manufacturer Defects

3.4

12 Review
5 Star
71
4 Star
14
3 Star
5
2 Star
2
1 Star
7

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: DandJ
A bit on the stiff side...
This hose is great but comes with two drawbacks. It is long so it can reach the whole pool however this comes at the cost of making it difficult to unclog if something gets stuck somewhere near the middle. Also, the hose is stiff so it may not always allow the vacuum to reach all areas of the pool (say if it gets wound up).
Scritto da: Mary Casteel
Does what it was intended to do.
So far so good. Sized right for our pool. Works as intended but to early to tell how long it will last. The last hose worked great for 15 years. Worked great the first season.
Scritto da: PJ Pederson
Awesome for off-label applications!!
Attention hobbyists, woodworkers, and shop-folk! This is some seriously impressive stuff! Does not crush/collapse with suction/vacuum pressure when used for branches in my shop dust collection system nor as an extended hose on my shop vac. Using this on my shop vac allows me to set the vacuum outdoors, keeping dust/noise out when cleaning up drywall/demolition mess. I’ve also been using this for years in my shop to connect branch circuits of my dust collection system to power tools and my CNC router. It’s a ridiculously durable alternative to standard shop ducting and vacuum hoses; it is also so much more affordable than these items normally run. Note: If using for dust collection, a 1 1/4” PVC barbed/threaded connection slips right into the tubing once cut, making it super simple to connect to power tools (belt grinders, belt sanders, miter/chop saws, etc.).
Scritto da: Barb P
So far so good
I hesitate to make TOO glowing a review just yet since I've only used it twice. But so far it's working fine. I'd had to replace my old hose because the suction from the filter was flattening the hose at the skimmer. After the first couple uses, this one is holding up just fine. The only reason I'm not giving 5 stars is because the swivel feature doesn't seem to be keeping the hose from twisting up in the pool. It just refuses to stay uncurled once I start moving it around. BUT, it doesn't kink when that happens and that doesn't seem to affect the suction.
Scritto da: Dallas Johnson
Don’t Guess on Length Needed
If you have a rectangular pool and are wondering what length to order to reach the farthest point of the pool and not have a bunch of extra hose to deal with or not enough, here you go. To determine how long of a hose you need, use the Pythagorean Theorem plus the depth. Take the length of your pool, square it, multiply it by the width of your pool squared. Then take the square root of that number. Then taken add the depth of the deep end. So my pool is 32’ long by 16’ wide. 32’^2*16’^2=1280. Square root of that is 35.8. The deepest part of my pool is 8’. So 35.8+8=43.8. So I got a 45 foot long hose. Works perfectly!
Scritto da: Wesley M. Groves
Not made to work on automatic suction type cleaners, (or robotic) pool cleaners!
"Not made to work on automatic suction type cleaners, (or robotic) pool cleaners." I don't know how I missed the above statement lister under "About This Item", but somehow I did. I purchased this hose to replace my "Pool Cleaner" hose and it definitely does NOT work for that purpose. Unfortunately this hose does not work particularly well for a manual vacuum attachment on the end of a pole either. The hose does not want to uncurl and is so buoyant that the manual vacuum head does not easily rest on the bottom of the pool. Both connectors at the ends of the hose are female and made with a hard slick plastic that does not stay attached well to the vacuum head. (It would have been nice if they had included a gender switching adapter for one end so that you could connect the discharge side to an inline pre-filter that floats in the pool). I am frustrated that I waited too long before testing the hose and missed the return date, otherwise I would have sent the hose back. I will try leaving the hose fully extended in a straight line for a couple of days and see if that helps the coiling problem. Aside from my failure to read the limitations of this product, I do not recommend it because of the coiling problems, excessive buoyancy and hard slick plastic connectors.
Scritto da: Bill
a 40 foot hose is to short for a 36 ft pool
Good hose but when he suction hits it draws up some - so my 18 X 36 pool with a side suction connector - comes out short to the far corner. Lucky I saved the old hose and added 10 foot on to make the far corner.
Scritto da: aaron jarvis
does the job
thinner than my last hose but so far it's doing the same quality job.
Scritto da: Norma Stieh
Nice quality
Nice and long, just what I needed, good quality!
Scritto da: Chad
Pool hose
It does the job nicely with one swivel end and one solid
Scritto da: Luis
Muy bueno
Es buena, esta larga aunque un poco difícil de poner en la boquilla pero creo que eso es mínimo, buen producto
Scritto da: Amazon Customer
Buy it.
????????

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array