Proxxon 28610 Support universel UHZ, avec pince, Vert

Name: Proxxon 28610 Support universel UHZ, avec pince, Vert
Brand: Proxxon
SKU: 0798256189432
Price: 76.47 EUR
Availability: InStock

Brand:Proxxon

3.7/5

€
76.47

DESCRIPTION DU PRODUIT Tourne dans toutes les directions. Se fixe facilement aux établis et aux tables jusqu'à 2 3/8 (60 mm). Vous pouvez également utiliser 2 vis standard pour fixer à la surface de travail. L'alésage 4/5 (20 mm) accepte toutes les perceuses et meuleuses MICROMOT, par ex. FBS 115/E, IBS/E, MICROMOT 50, 50/E et 50/EF, FBS 12/EF. Remarque : L'outil rotatif illustré ici n'est pas inclus dans la livraison. DU FABRICANT Support universel Proxxon UHZ avec pince. Ce support maintient solidement tous les outils rotatifs Micromot avec un collier de 4/5 pouces. La tête pivotante tourne dans toutes les directions (même vers le bas devant l'établi). La base stable en zinc moulé sous pression est également munie de trous percés et taraudés afin de visser l'étau de façon permanente à l'établi.

Montant

Ajouter au panier Acheter maintenant

EAN: 0798256189432

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour perceuses, Rallonges de mèches,

La base stable en zinc moulé sous pression est pourvue de trous percés et taraudés. La tête pivotante tourne dans toutes les directions, y compris devant l'établi. Contient tous les outils rotatifs Micromot avec un collier de 4/5 pouces. Support universel UHZ avec pince.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Proxxon
Color	Green
Color	‎Green
Country of Origin	‎Taiwan
Customer Reviews	4.7 4.7 out of 5 stars 332 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6.3 x 5.91 x 2.76 inches
Item model number	‎28610
Item Package Quantity	‎1
Item Weight	0.01 Ounces
Item Weight	‎0.01 ounces
Manufacturer	‎Proxxon
Material	Steal
Material	‎Steal
Part Number	‎28610
Product Dimensions	‎6.3 x 5.91 x 2.76 inches
Style	Modern
Style	‎Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: KungFuJosh

Awesome

I love Proxxon for precision, and this base makes it even easier to use. I'm done with Dremel, they're overpriced trash.

Scritto da: L. Orwig

greatly increases utility of your rotary tool

This clamp is very easy to adjust - one screw governs movement in all directions, and it's pretty solid once tightened. The clamp works fine and keeps the mount stable but the black tightening knob is a bit small. It's easy to keep clean, easy to adjust, and keeps the tool where you put it. Having the tool in one spot and moving the piece that I'm working on usually gives me much greater control, especially on small, fragile, or uneven pieces that are hard to clamp in place. Highly recommended accessory to the Proxxon.

Scritto da: Steff

much better than Dremel

Though small in size, this is a powerful tool with a wide range of applications. The front part of the housing is made of aluminum alloy and very study. Because it is metal, the clamp can hold the machine tight and precise. The vibrations are modest, especially given the RPM. The electronics regulates the RPM under load. I have used both, Dremel and Proxxon and I highly prefer the latter.

Scritto da: MeteorMagnet

Got a grip!

Nifty tool stand, as long as you're not trying to grind axles or something. This is great with the Micromot 50 E/F, for instance, for light grinding, carving, and finishing. The base is hefty enough to allow "semi-freehand" work, without the tool flying across the bench. Then, the base clips on for more static work. The ball socket handles any load that would reasonably be applied.

Scritto da: Stefan Brunner

Rotary work station

Since I brought back the cordless version from Europe when it first came out, my 15 year old corded IB/E set idle. This holder together with the flex shaft puts this trusty tool back to use. It is now affixed to my small workbench in my office (which is the extension of a long office desk), which I use for smaller repairs around the house. It is extremely handy to have a stationary system where you just have to toggle the on/off switch, instead of looking where you put the case, taking it out of the box, putting the attachment on, etc... I most often use one of the silicon polishing disks and tips, and leave these attached, to remove corrosion from various electronic toys and devices around the house. Helps to mitigate leaking batteries, and these Duracell AA always leak, or slobber infiltration in toys. For other kind of work, the flex shaft gives you more precision bc it is lightweight and easy to navigate, and there is no bulk so that you can get into small corners with the tool. The holder is a big upgrade over the drill stand that easily tips over if you work with the flex shaft. And as mentioned, having a stationary system is just nice, and it does not look industrial either next to my many monitors which I use for my day job. You can also use the holder with grinder attachments to lead the work piece into the tool, instead of the other way around. You can position the holder vertically or horizontally or anywhere in between, and turn into any direction because of the ball mount. This holder fits any tool with 20 mm collar which includes the whole Proxxon hand tool lineup.

Scritto da: Joseph Hayes

A third hand .

Perfect for the occasional hands free operation, reasonable quality as always fom Proxxon.

Scritto da: Steve Richardson

A MUST FOR PROXXON ROTARY WORK TOOLS!!

Excellent piece of kit allowing the rotary tool to be held securely whilst using tools to form and clean the work piece in total confidence.

Scritto da: Ian H

Quality product.

A very solid product. Does what it says on the tin.

Scritto da: Enno P.

Sehr nützlich

The media could not be loaded. Ich finde diesen Halter sehr nützlich um mit einem Werk Stück an zb. Schleifstein zu arbeiten, mal eben etwas schärfen, schleifen oder anspitzen. Kein Problem damit.

Scritto da: Master Retsam

praktisch, aber --wieder mal-- wenig passgenau...

Hatte den UHZ zusammen mit dem Bohrständer MB 200 gekauft; und während beim MB200 ein FBS 240/E NICHT (wirklich garnicht) in die Halterung zu kriegen war, geht's bei der UHZ grade so mit Ach und Krach und viel Gewalt. Mir unverständlich (die Manschette vom FBS240 ist wirklich exakt 20 mm breit).... -- dafür 1 Stern Abzug. Ein weitrer Punktabzug für die Zwinge (den Klemmfuß): die Kontaktflächen Zwinge-zu-Halterungsgehäuse sind ungünstig abgeschrägt -- bei Belastung & Vibration neigt die Zwinge zum 'Rauswandern' (wäre die Schräge 'andersrum', würden sich die 2 Teile bei Belastung schön sicher ineinander 'verkeilen')... Hab ich behoben, indem ich 'ne Bohrung durch hab, und Klemmfuß & Halterung nun mittels Schraube/Flügelmutter fest verschrauben kann (siehe Foto) -- ist auch praktischer so, wenn man die Halterung schnell von der Werkbank ab- und woanders dranschrauben will (und man hat nicht mehr dieses 2-teilige 'rumklöter-System' ;) Also: schon praktisch & günstig (von daher empfehlenswert) -- aber sehr nervig, wenn man ein Exemplar mit zu ENGER Aufnahme erwischt...