Reach Barrier 3016 Kit d'isolation pour chauffe-eau

Name: Reach Barrier 3016 Kit d'isolation pour chauffe-eau
Brand: Reach Barrier
SKU: 0785577135255
Price: 97.08 EUR
Availability: InStock

Brand:Reach Barrier

3.3/5

€
97.08

DESCRIPTION DU PRODUIT Reach Barrier 3016 Kit d'isolation pour chauffe-eau. Le kit d'isolation pour chauffe-eau à air réfléchissant Reach Barrier 3016 du fabricant maintient l'eau dans le réservoir plus chaude pendant une plus longue période et s'adapte à la plupart des tailles de réservoirs de chauffe-eau. Cela vous fera économiser de l'argent, car le chauffage de l'eau peut représenter de 14 à 25 % de l'énergie consommée dans une maison. L'ajout d'isolant à un chauffe-eau peut réduire les pertes de chaleur en veille de 25 à 45 %. Tout réservoir de chauffe-eau chaud au toucher peut bénéficier d'un kit d'isolation. Le kit d'isolation pour chauffe-eau Reach Barrier 3016 Single Reflective Air comprend (1) rouleau de 24 pouces par 192 pouces de protecteur de chauffe-eau Reach Barrier Single Reflective Air™, un ruban super résistant à la température et un guide d'instructions facile à suivre. Les produits d'isolation réfléchissants de Reach Barrier sont l'un des produits d'isolation les plus polyvalents et éconergétiques disponibles. Des barrières radiantes (réfléchissantes) sont installées dans les greniers, les murs, le platelage du toit et le sol. La plupart des maisons nouvellement construites contiennent une isolation par barrière radiante en raison de l'efficacité éprouvée pour réduire la consommation d'énergie et les coûts en réduisant le gain de chaleur en été et la perte de chaleur en hiver. L'installation d'une barrière radiante peut être l'amélioration la moins coûteuse qui peut produire la plus grande réduction globale de la consommation d'énergie et des dépenses. L'air réfléchissant simple répond aux normes ASTM et est conforme au code du bâtiment.

Aucune unité disponible

EAN: 0785577135255

Catégories Outils et amélioration de la maison, Racing Wheels, HVAC, Intempéries, Couvertures de tuyaux,

Le kit comprend : 1 protecteur de chauffe-eau à isolation à bulles Reach Barrier (TM) qui s'adapte à la plupart des tailles de réservoirs de chauffe-eau, un ruban super résistant à la température et un guide d'instructions facile à suivre. Facile à utiliser et à installer, le panneau prédécoupé ne nécessite aucun vêtement de protection ni outil spécial lors de l'installation. Dépasse les nouveaux codes d'incendie et ne nécessite aucun entretien. L'isolation comprend 2 couches de bulles barrières de 5/32 pouces laminées entre 2 couches de polyéthylène réfléchissant, ce qui aidera à fournir des valeurs R plus cohérentes. L'isolation réfléchissante Reach Barrier(TM) et la technologie de barrière à bulles bloquent jusqu'à 95 % de la chaleur rayonnante, ce qui vous aidera à économiser de l'énergie et de l'argent.

Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 177 ratings 4.3 out of 5 stars
Item model number	‎3016
Item Package Quantity	‎1
Item Weight	‎2.2 pounds
Manufacturer	‎Reach Barrier
Part Number	‎3016
Power Source	‎Corded electric
Product Dimensions	‎25.1 x 8.4 x 6.6 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: SLady

Terrific!

This product is easy to work with. Covered my entire hot water heater. Good purchase.

Scritto da: Todd H.

Easier to install than expected

My gas water heater is in an unheated space, so I bought this kit to help with heat loss. This insulation kit was less expensive than other kits available, I assumed this would be because the wrap material was thinner. It was slightly thinner than other insulation wrap I previously used. I had some thicker wrap left from another project, enough to make a "disk" for the top of the heater, rather than fold over the edges of the top layer of the material per the instructions. This allowed me to used the 24" roll hight to make two wraps around the heater and finish with the bottom just above the air vents. The material itself went on easily. It stayed in place as I taped it on, making my cuts a around the various items as I went. This was a challenging installation as I only have access to the heater on two sides. The material was flexible enough to get around obstructions, but stayed in place once attached with the included tape. There seems to plenty of material to completely cover a standard size heater. I did run out of tape just as I finished, but did use extra tape around the earthquake strapping, so I believe there is also enough tape for most applications.

Scritto da: George E.

Quick And Easy

Way better fit (50Gal) than the usual blanket type…That an no Fiberglas issues! I like it…

Scritto da: D. R. Sauerzopf

Plenty of product to wrap a 40/50 gallon tank. No messy fiberglass. Installed on an electric heater

Just put in a new 40 gallon hot water heater. Used this wrap today. Had plenty of material to cover the tank with plenty of over wrap. The tape you get is fair. As long as everything is clean it should stick and hold. We shall see. I keep my basement around 72. Once I put the wrap on completely. I could feel heat coming off the top of the water heater. I did do the pizza cutting process for the top as recommended and I think some additional insulation would help on the top side since heat rises. All I used was scissors, utility knife, and a tape measure.

Scritto da: dokdmento

It’s better than the deteriorated insulation that I had but, the insulation is warm to the touch, so how good can it be? It was easy to install and not that expensive so…..

Scritto da: Aaron

Make sure you take the time to do it right (UPDATE: and buy different tape)

Break out your scissors and measuring tape, you are in for a crafting project. It does take some patience and precision to install correctly, but the end result is good. Allocate 1/2 hour for the installation. The product comes with ample insulation to cover a hot water heater (I had some left over). The silver tape roll that comes with the product was sticky enough to hold the insulation but wasn't quite long enough to do the full job. Overall, if you are the type who doesn’t mind spending the time to do something right, you’ll probably like this product. UPDATE: After being installed 2 weeks I notice that the silver tape is coming undone anywhere there is a corner or a fold. The tape just isn't made to last the test of time. I'll be looking to order some different tape to re-do the areas the tape is coming un-stuck.

Scritto da: Simon Elash

Keeps water heater warm

Could tell a difference immediately in as much as water heater kicking on. Takes a little time to install as you will need tape measure, some type of marker and scissors. Pretty easy to install just measure and take your time when taping and press tape to get good adhesion.

Scritto da: B. Callahan

Seems ok. A little thin

Another "get what you pay for" situation. It was easy enough to trim and tape onto the heater. But the material is thin and you can feel heat through it. It must be better than nothing, though. I hate fiberglass but I would get it if it was the only step up from this one.