SharkBite Connecteur d'adoucisseur d'eau flexible tressé en acier inoxydable 3/4 po x 1 po FIP x 24 po, raccord de plomberie en laiton Push To Connect, tuyau PEX, cuivre, CPVC, PE-RT, HDPE, U3086FLEX24LF

Brand:SharkBite

3.8/5

50.99

DESCRIPTION DU PRODUIT Ce connecteur logiciel d'eau flexible en acier inoxydable SharkBite offert en acier inoxydable tressé vous permet de connecter de nouveaux adoucisseurs d'eau ou de remplacer les connecteurs existants rapidement et facilement. Cette conception push-to-connect est idéale pour les espaces restreints et assure une connexion propre et sans fuite. Ce joint de chauffe-eau intuitif est compatible avec les tubes PEX, PE-RT, CPVC, SDR-9 HDPE et les tuyaux en cuivre, dans n'importe quelle combinaison. La conception innovante push-to-connect aux deux extrémités de ce tuyau de chauffe-eau fait des virages serrés sans se tordre pour connecter les tuyaux qui ne s'alignent pas. Ce raccord de chauffe-eau portable peut être utilisé sans outils spéciaux, soudure ou colle requis pour une installation plus facile et plus rapide. Les outils et raccords SharkBite répondent aux mêmes normes élevées pour les applications de plomberie commerciales et résidentielles, combinant durabilité et facilité d'utilisation adaptées aux réparations commerciales ou aux projets de rénovation domiciliaire. Les connecteurs d'adoucisseur d'eau SharkBite présentent une température de fonctionnement maximale de 200 degrés F et une pression de fonctionnement maximale de 200 PSI. DU FABRICANT Ces connecteurs tressés en acier inoxydable permettent un raccordement rapide de l'adoucisseur d'eau. La possibilité de faire pivoter le connecteur SharkBite après l'avoir poussé sur le tuyau et la flexibilité du tuyau tressé permettent des connexions dans des espaces restreints et sans raccords supplémentaires.

Caractéristiques : les connecteurs de chauffe-eau SharkBite ont une température de fonctionnement maximale de 200 degrés F et une pression de fonctionnement maximale de 200 PSI. Préféré par le professionnel : les outils et raccords SharkBite répondent aux mêmes normes élevées pour les applications de plomberie commerciales et résidentielles ; convient aux réparations commerciales ou aux projets de rénovation domiciliaire ; assure une connexion propre et sans fuite et est sans plomb. Facile à installer : les deux extrémités de ce tuyau de chauffe-eau font des virages serrés sans se plier pour connecter les tuyaux qui ne s'alignent pas ; aucun outil, sertissage, colle ou soudure requis pour une installation facile ; retirer à l'aide d'un clip de déconnexion ou de pinces de déconnexion. Polyvalent : ce raccord flexible pour chauffe-eau fonctionne bien avec les tubes PEX, PE-RT, CPVC, SDR-9 HDPE et les tuyaux en cuivre. Connecteur d'adoucisseur d'eau Sharkbite : ce connecteur d'adoucisseur d'eau portable en acier inoxydable proposé en acier inoxydable tressé vous permet de connecter de nouveaux adoucisseurs d'eau ou de remplacer les connecteurs existants rapidement et facilement ; idéal pour travailler dans des espaces restreints.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Certification
Color Stainless Steel
Color ‎Stainless Steel
Country of Origin ‎China
Customer Reviews 4.8 4.8 out of 5 stars 481 ratings 4.8 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
Exterior Finish ‎Brass
Included Components ‎Water Softener Hose
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 24 x 1.25 x 1.25 inches
Item Dimensions LxWxH ‎24 x 1.25 x 1.25 inches
Item model number ‎U3086FLEX24LF
Item Package Quantity ‎1
Item Weight 0.75 Pounds
Item Weight ‎0.75 Pounds
Item Weight ‎12 ounces
Manufacturer ‎Cash Acme
Material Stainless Steel
Material ‎Stainless Steel
Measurement System ‎inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎U3086FLEX24LF
Product Dimensions ‎24 x 1.25 x 1.25 inches
Size Pack of 1
Size ‎Pack of 1
Thread Type NPT
Thread Type ‎NPT

3.8

13 Review
5 Star
86
4 Star
8
3 Star
4
2 Star
1
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: WinpakBob
Plumbing Pro Result
This easy to install hose will make a pro out of you. Perfect match to my water softener manifold and connected easily to my drippy supply pipes. It may be a bit pricy, and if you love to mumble four letter words under your breath as you try to solder drippy pipes, this may not be for you. BUT if you want to get the job done well and the first time, the price is worth it!
Scritto da: Tyler Fullington
Works Well For Specific Scenarios, No Tools / Skills Needed
This is the perfect part for integrating a water softener and/or iron filter into your existing 3/4" water system. It is easy to install, requiring no special tools or skills and very effective for it's purpose. The flexible lines make for great smooth flow, and there are no leaks when installed correctly. However, if you are building a new system or want something cleaner looking, I would recommend the "SharkBite UC529LFA 3/4x1 FNPT swivel adapter" also on amazon for $8 each. They require a crimp connection so they aren't for everyone, but if you are already overhauling your water piping and have or are planning on getting crimpers they are the perfect part for the job and not something you will find locally. That being said, I used these flexible hoses as an interim part of my setup and reused a set that came with my water softener and had zero issues, just wanted more flexibility and less torsional stress on the heads of my filtration equipment (these are heavy). P.S. Bonus is if you add equipment you can totally use a short piece of pipe and connect these SharkBite to SharkBite, I had this setup more over a month with no issues and see no reason it couldn't last as long as a typical SharkBite connection.
Scritto da: Kevin
as advertised
as advertised
Scritto da: Orlando Leone
Another thing I wish I knew existed.
This, too, would have saved me tremendous amounts of time from welding PVC adapters to PEX. It is usually best to avoid plastic runs to/from UV canisters as well.
Scritto da: jimh1008
SharkBite water softener hoses
Making a somewhat tough job (sweating copper fittings) of connecting a water softener, a piece of cake. Whether you are using copper or PEX lines.......these make for a nice and quick connection.
Scritto da: Dshow
I like these fittings...
First time using 'sharkbite' connectors. Very easy to install. They tell you the distance on the pipe these should be seated. I marked that distance on the pipe and these did not install that far...? (It was close...) Since I installed 2 and they installed the same distance each and didn't leak, I called it good.... My connections are easy to get at if there is ever an issue. Anyway, I will use Sharkbite again. (They cost more so I wouldn't want to build a house with them, but for minor repair work, they are great!)
Scritto da: john
what has happen when installing
The 3/4 copper pipe did not go in far enough
Scritto da: MacAttack
Good product
Quality plumbing parts. Installation is easy. Just remember to polish the pipe if corroded and remove any burrs. However if you need to remove the hose afterwards you'll need a release tool. The cheap little release tools found at home improvement stores are a bear to use. I did have to remove mine after a temporary install. Squeezing the tool and pulling on the hose without destroying the pipes connected to it was a chore. I got it done though and with no leaks.
Scritto da: Mike
Sharkbite for Watersoftener
So very happy! I had trouble finding a way to change out my old softener for a new one without doing new plumbing. These flex pipes did the trick. I cut off the old and just stuck these on. No leaks and everything works great!
Scritto da: Guru
Convenience
This braided flexible stainless steel hose is very convenient. It correct for any floor unevenness and make installation very simple, practical and fast thus make the installation job very easy. Note: This hose should have been included in every water softener unit. On a 10 rating scale, I will give it a perfect 10.
Scritto da: Fred Labbate
excellant!
I bought 2 of these and used them with a Scala 2 pump. The 1" end threads right onto the pump inlet and outlet with some Teflon tape applied. Not much more that hand tight and no leaks! the 3/4" sharkbite end is great tied right into my 3/4" pipework. Price is way better than the local hardware store!
Scritto da: Rammy
Ease of install
Work great. Time saver and must have as it is hare to find the 1 inch fittings when installing water softener.
Scritto da: Doug Kiesman
The size at both ends and length
Used it to hook up my water softener was fast and easy worked great

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array