SharkBite Vanne à boisseau sphérique 2 pouces, raccord de plomberie en laiton Push to Connect, tuyau PEX, cuivre, CPVC, PE-RT et HDPE, vanne UXLBV54 2 po x 2 po

Name: SharkBite Vanne à boisseau sphérique 2 pouces, raccord de plomberie en laiton Push to Connect, tuyau PEX, cuivre, CPVC, PE-RT et HDPE, vanne UXLBV54 2 po x 2 po
Brand: SharkBite
SKU: 0697285039308
Price: 185.66 EUR
Availability: InStock

Brand:SharkBite

3.8/5

€
185.66

Connectez facilement le tuyau en quelques secondes avec le réducteur de raccord SharkBite Push-To-Connect. Un côté a un adaptateur de cordier CTS, qui peut être poussé dans n'importe quel raccord SharkBite, et l'autre a une extrémité SharkBite Push-to-Connect. Sans soudure, colliers ou colle requis, c'est aussi simple que d'insérer votre tuyau dans le raccord. Le raccord SharkBite est conçu pour les applications d'eau potable et de chauffage par rayonnement (y compris les applications souterraines et derrière le mur). Les raccords de grand diamètre (1-1/4 à 2 pouces) nécessitent un raidisseur (vendu séparément) lors de la connexion au tuyau PEX.CUT. POUSSER. TERMINÉ. Le système de connexion SharkBite rend tout projet de plomberie rapide et facile grâce à la technologie push-to-connect unique. Lorsque vous insérez un tuyau dans un raccord à connexion rapide SharkBite, les dents en acier inoxydable du raccord mordent et agrippent le tuyau, tandis que son joint torique spécial se comprime pour créer un joint étanche. Les produits SharkBite fonctionnent avec votre plomberie existante, sont faciles à démonter pour changer et réutiliser les raccords, et peuvent être tournés pour une installation dans des espaces restreints. Que vous ayez besoin de réparer un tuyau cassé ou de plomber toute une maison, SharkBite fournit une solution push-to-connect et des résultats sans fuite.

Montant

Ajouter au panier Acheter maintenant

EAN: 0697285039308

Catégories Industriel et scientifique, Hydraulique, pneumatique et plomberie, Raccords, Valves, Soupapes à bille,

CERTIFIÉ : Certifié à 200 PSI et 200 degrés F et peut être réutilisé jusqu'à 4 fois. HAUTE QUALITÉ : la qualité et les performances de SharkBite ont fait leurs preuves sur le terrain avec plus de 550 millions de connexions ; SharkBite est la seule marque push-to-connect qui peut garantir des connexions propres et sans fuite. Sans plomb : fabriqué en laiton DZR forgé de haute qualité sans plomb. Polyvalent : les raccords de plomberie SharkBite s'adaptent aux tuyaux en cuivre, CPVC, PE-RT et PEX. S'installe en quelques secondes : pas d'outils spéciaux, de soudure, de sertissage ou de colle, il suffit de pousser pour créer un joint étanche.

Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Brass
Color	‎Brass
Connector Type	Reducer
Connector Type	‎Reducer
Country of Origin	‎USA
Customer Reviews	4.8 4.8 out of 5 stars 4,621 ratings 4.8 out of 5 stars
Exterior Finish	UXLBV54
Exterior Finish	‎UXLBV54
Finish	‎DZR Lead Free Brass
Included Components	‎Ball Nose End Mill
Item Dimensions LxWxH	17.15 x 13.15 x 11.15 inches
Item Dimensions LxWxH	‎17.15 x 13.15 x 11.15 inches
Item model number	‎UXLBV54
Item Package Quantity	‎1
Item Weight	1 Pounds
Item Weight	‎1 Pounds
Manufacturer	‎Cash Acme
Material	Stainless Steel
Material	‎Stainless Steel
Measurement System	‎Metric
Part Number	‎UXLBV54
Product Dimensions	‎17.15 x 13.15 x 11.15 inches
Size	2 in. x 2 in.
Size	‎2 in. x 2 in.
Style	‎Valve
Thread Size	2 inch
Thread Size	‎2 inch
Usage	‎Used to shut-off water flow for servicing and making repairs. Compatible with PEX copper, CPVC, PE-RT and HDPE pipe.

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Mr. Dellbrook

First time using a push on ball valve

I added a shut off to the hot water exit pipe from the existing hot water heater. I did not want to do a solder joint because trying to rid all the dripping water from soldering process is a pain. For the 3/4 ball valve, I removed a 1-5/16" section of the existing copper pipe to insert the new push on fitting valve. With water turned back on....no joint leak!

Scritto da: meoff

NO MORE SWEATING

Had doubts at first but after reading reviews I replaced one outside valve and have to say that this is the best thing to come along since toilet paper!

Scritto da: Susan

Great product

Love the shark bite connectors.

Scritto da: Richard

You can do it!

No special skills needed. Pipe cutter or hacksaw and sandpaper. Clean off paint or corrosion. Cut out old valve. Push to connect new valve. Save a fortune.

Scritto da: mongoose

Works great

No leaks, easy push on install. Can’t ask for more.

Scritto da: james m.

Check size

Works well

Scritto da: Clinton A.

Can't beat a shark bite.

This was an easy install to replace an old shut off valve

Scritto da: fatty

Works Great!

Used this as a main water shut off to my house. It's operation is very smooth. The reason I used this shark bite valve is that it is easy to remove and replace if need be. The one I had installed years ago has lead in it which I just found out, and is not for potable water. Since it's well water and I have RO drinking water, I was not drinking the water but wanted to remove the valve for obvious reasons. This terrific valve will make future replacements a breeze without cutting pipes. I also used the fitting that converts from PVC to CPVC from well to house.

Scritto da: Amazon Customer

Easy install, does what it should.

Easy to install and works as it should. Well designed and quality manufacturing .

Scritto da: alcar

Shut the front tap!

I've been meaning (for 8 years now) to run a water line from our house into our attached garage. The main reason was for our fridge ice maker but I also wanted a hose access for those winter months. I finally decided to tackle the project. These are simply amazing. So easy to use and super fast. Once you prep your line properly, you simply push the line in the fitting, make sure it's seated all the way and Done! No more soldering. These are amazing especially for close quarters. Even if you mess up, you can simply remove them and fix your error. I have this one at the end of a temporary line that will go out the side of the garage this summer for an outside hose. (all the way to right of image) It's acting as cap right now but will be used to shut off the outside water during the winter months. Overall, these are a lifesaver. I know many people say these type of fittings don't last but I've seen homes that have had them for years with no leaks. I took a chance with these and I'm confident they will last a long time (hopefully forever). I highly recommend these especially if plumbing is not your thing. Pros: Super easy to install reusable solid, no leaks full brass fitting Cons: costly compared to normal fittings can only re-use so many times

Scritto da: Amazon Customer

unit easy to install

works like they say

Scritto da: J.R.

Easy to install

Wow, I am impressed at how easy this was to install on an existing line. And I have the coordination and manual dexterity of a 2-year-old. I wanted to put a shut off valve to the waterline feeding my outside faucet and prevent the line from freezing over during the winter. This works very well. Just push the line into the valve (with some force) until it no longer goes further in, do the same for the other side, you're done... well, clean the floor from some water dripping because you did not put a towel to catch it, and you're done! I would NOT have paid full price for this, but the discounted price made it a great purchase

Scritto da: ali a.

Easy to install

Good one