0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Stens New Flat Idler 280-242 Compatible avec/Remplacement pour John Deere Série 100 GY20110, GY20629, GY22082

Brand:Stens

3.7/5

€
43.34

Rouleau plat robuste Stens

Aucune unité disponible

EAN: 0023899301010

Catégories Industriel et scientifique, Produits de transmission de puissance, Pulleys, Poulies de courroie de transmission,

Les revendeurs professionnels font confiance aux pièces de marque Stens pour effectuer des réparations de qualité OEM. Le nom Stens figure sur tous les emballages de produits authentiques Stens. La garantie Stens d'un an garantit la fiabilité et la performance de chaque pièce. Nous sommes convaincus que nos produits fonctionneront parfaitement, mais dans les rares cas où ce ne serait pas le cas, nous les remplacerons à tout moment dans l'année suivant votre commande. Compatible avec/remplacement pour : John Deere : série 100. Remplace les numéros OEM : John Deere : GY20110, GY20629, GY22082. Spécifications : Description : Flat Idler, Hauteur : 1 3/4, ID : 11/16, OD : 5 1/8, Matériau : Métal, Heavy Duty : TRUE, Pour l'explication des lettres, reportez-vous au dessin en cliquant sur Plus d'infos , fabriqué par : un fournisseur OEM, A : : 5 1/8, B : : 4 1/4, C : : 11/16, D : : 1, F : : 1/4, H : : 1/4, V :: 1 3/4.
Country of Origin USA
Is Discontinued By Manufacturer No
Item model number 280-242
Manufacturer Stens
Product Dimensions 12 x 10 x 12 inches; 1.25 Pounds

3.7

13 Review
5 Star
75
4 Star
19
3 Star
4
2 Star
1
1 Star
1

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Gregg
Fit good
Same quality as stock part
Scritto da: Amazon Customer
It looked good and works well.
I was a good replacement part and value.
Scritto da: Richard Maddern
Great product, good price, fast service - thanks
Great product, good price, fast service - thanks
Scritto da: Walter H.
good fit
good value
Scritto da: Twitchell, PhD Voc Ed
it seemed very good to me
Found the bearing in this flat pulley worn when tuning up my mower deck. This is not an original equipment pulley. However, it may be of higher quality; it seemed very good to me. Whenever you have your mower off the tractor, it would be a good idea to check both flat pullies for bearing wear. With two new spindles and one new flat pulley my mower makes a good deal less noise than the engine on my John Deerea LA115 garden tractor and with new wheels and sharpened blades it cuts smooth as a dream.. PS This is also a good time to check the brakes on each V pulleys that mount to the mower blade spindles. This is my second deck on my LA 115 John Deere garden tractor. On both decks, the factory setting wore out one of the brakes long before the other was worn. If you adjust them so they both engage at the same time, it will stop the mower blades better and keep the wear even. These brakes are required by federal law to stop the mower blades rapidly anytime the mower is stopped. *Helps to keep foolish people from losing fingers and toes.
Scritto da: ScotD
Direct-fit replacement
This fits like OEM, didn't have to change the belt to a different size.
Scritto da: FlyingDutchMan
Made in USA!
Made here, that I like! Great product, better than OEM John Deere, theirs had some play in the bearing, this one 0 (zero) play. What else can I say, I would go for this one every time.
Scritto da: Amanda Hales
USA made
Better quality than OEM
Scritto da: marc jackson
Very stiff bearings not free spinning at all.
Don’t buy these. I purchased 2 of them and both have cheap bearings with which I can assume have no grease. I installed on my John Deere tractor and burned off 2 belts within one hour of use each. The pulley doesn’t free spin and is very stiff causing lots of heat to the belt which in turn wrecked my brand new belt.
Scritto da: Joe
Good value
Works great on my JD LA145
Scritto da: Catherine
Perfect!
Item works and fits well!
Scritto da: Shotgun- Amazon Customer
Perfect replacement Idler Pulley
Perfect fit on my John Deere La165 with the 48" Edge Cutting Deck... Great price and well made..
Scritto da: Donna Wood
Idler pulley worked perfect
the perfect size, and easy to install

Produits connexes

hot
AJ ANTUNES - ROUNDUP 7000851 Kit d'assemblage de roulement de renvoi
0.1/5

€ 128.41

AJ ANTUNES - ROUNDUP 7000851 Kit d'assemblage de roulement de renvoi
0.1/5

€ 128.41

hot
Stens New Flat Idler 280-242 Compatible avec/Remplacement pour John Deere Série 100 GY20110, GY20629, GY22082
3.7/5

€ 43.34

Stens New Flat Idler 280-242 Compatible avec/Remplacement pour John Deere Série 100 GY20110, GY20629, GY22082
3.7/5

€ 43.34

hot
NIBCO QT763 X Silock d'angle 1/2 quart de tour - Coupelle
3.7/5

€ 44.41

NIBCO QT763 X Silock d'angle 1/2 quart de tour - Coupelle
3.7/5

€ 44.41

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu