Summit Outdoors E1088 Supports d'ascenseur, maison de jeu en acier de qualité construction, balançoire, cabane dans les arbres et supports de support pour cerf, 4x4 (lot de 4) Noir

Brand:Elevators

3.8/5

225.06

Gagnez du temps avec nos supports d'élévateur à angle composé E1088 4 x 4. Nos supports d'élévateur sont fabriqués aux États-Unis et disposent de plus de 30 % d'acier de qualité supérieure que n'importe quel concurrent, ce qui signifie qu'ils ne sont pas seulement plus solides, mais aussi conçus pour durer plus longtemps. Nos ascenseurs sont conçus pour résister aux éléments et peuvent résister à des vents violents et à des températures glaciales que d'autres ne peuvent pas supporter. Chaque 4x4 insère 5,75" pour assurer un maximum de sécurité et de robustesse. Nos élévateurs en acier robuste de calibre 12 sont également dotés de joints soudés par robot et sont suffisamment solides pour supporter des maisons de jeux à faire soi-même, des plateformes de balançoires, des stores pour cerfs ou des terrasses autoportantes. Les ascenseurs sont conçus avec un angle de 8° qui est scientifiquement prouvé comme étant l'angle optimal pour supporter des charges verticales et empêcher le balancement latéral. Lors de votre prochain projet, utilisez les supports originaux et les meilleurs, les ascenseurs, toujours fabriqués aux États-Unis. 4 ascenseurs individuels E1088 inclus.

Fabriqué aux États-Unis : nous sommes le fournisseur original et le plus fiable de supports d'ascenseur pour cerfs. Construire mieux : nos supports d'ascenseurs polyvalents/chevreuils disposent d'un angle de 8° qui est scientifiquement prouvé comme étant l'angle optimal pour les charges verticales et empêchant le balancement latéral. Design breveté : nos supports de cabane dans les arbres faciles à utiliser comportent des trous pré-percés pour les tire-fond ou les boulons de carrosserie et sont idéaux pour construire des maisons de jeux stables, des plateformes de balançoires, des terrasses autoportantes ou des supports d'arbres à cerfs. Construction robuste : fabriqués en acier de qualité supérieure de calibre 12 avec joints soudés, nos élévateurs à cerfs sont plus de 30 % plus résistants que la concurrence et sont conçus pour résister à toutes les conditions. Supports d'ascenseur multifonctions (4x4) : nos supports de poteau 4x4 polyvalents sont parfaits pour les cabanes dans les arbres, les balançoires, les tours d'observation et les supports de stores pour cerfs surélevés.
Age Range (Description) Adult
Age Range (Description) ‎Adult
Batteries Included? ‎No
Batteries Required? ‎No
Brand Elevators
Brand ‎Elevators
Color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 989 ratings 4.8 out of 5 stars
Floor Length ‎8.4 Inches
Included Components ‎Set of 4 E1088 Elevator Brackets
Installation Method Free Standing
Installation Method ‎Free Standing
Is Discontinued By Manufacturer ‎No
Item model number ‎E1088
Item Package Quantity ‎1
Item Weight 24 Pounds
Item Weight ‎24 Pounds
Manufacturer ‎Elevators, LLC
Material Alloy Steel
Material ‎Alloy Steel
Number Of Pieces ‎4
Part Number ‎E1088
Pole Material Type ‎Wood
Product Care Instructions Hand Wash
Product Care Instructions ‎Hand Wash
Product Dimensions 8.4"L x 4"W x 11.7"H
Product Dimensions ‎8.4 x 4 x 11.7 inches
Product Dimensions ‎8.4"L x 4"W x 11.7"H
Recommended Uses For Product Hunting
Recommended Uses For Product ‎Hunting
Size ‎4 x 4
Sport Hunting, Outdoor Lifestyle
Sport ‎Hunting, Outdoor Lifestyle
Style ‎4 X 4
Warranty Description ‎Lifetime Warranty

3.8

12 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Devin Riles
Solid Construction
These elevator brackets are well made with thick steel. The welds are solid and it looks like these will hold plenty of weight for the deer stand I'm building. The only slight issue is that deep in the pocket where the plates attach to the 4x4 sockets, there is no powder coating and there was minor surface rust on the bare steel. A quick blast of rustoleum in the pocket should prevent and further corrosion. Otherwise, these are awesome.
Scritto da: disappointed
Best stand ever
Easy to install and then erect stand. With cross supports creates a very sturdy structure.
Scritto da: cw4usa
Great Value
Very sturdy construction and made building the new platform for my stand a breeze. When mounting the brackets, take great care in the sides that you mount them on. They will only work one way, properly. Mounted on the wrong sides, the force of the weight of your platform will try to pull the mounting board away from your intended connection...
Scritto da: Strawboss
Good product but has a small and neglible design flaw.
I did a very thorough www search to find the most suitable elevators for my stand. The ones I wanted were those which angled out in two directions ("compound angle") such that both sides of the platform corners got equal support. Some of those I found stated that they were built for the tower legs to be at a 15 degree angle outward from plumb. For my stand with 10' 4x4's I felt 15 degrees would result in an overkill spread between the posts at ground level. Meanwhile the descriptions for other elevators I found didn't state what the post angle was. For this set of elevators, the ones I bought, the Amazon description doesn't provide the post angle however both the manufacturer's website and the Home Depot's website state it's 8 degrees which is plenty adequate. They're also 12 gauge steel whereas some of the other brands of elevators are made of thinner material. To attach the elevators (those I'm reviewing) to your 2x6 the instructions call for carriage bolts to be inserted from the inside, through the wood member, with the nut on the outside. The only negative I found with these elevators is that inside vertical part of the elevator is too high and doesn't allow the carriage bolt head to clear it which is necessary for the bolt head to anchor into the wood. It's a bit of a struggle to work around this design mistake which the manufacturer could easily resolve. See photo below.
Scritto da: The BandMan
Decent
Priced a little high but worked great.
Scritto da: Amazon Customer
Awesome.
Awesome product.
Scritto da: Shepherd
Works great
Although I put them on two by fours with three-quarter inch plywood on the deck, they work great. Very sturdy and the best part is, they are made in the USA. This is going to be a elevated/heated deer tree stand.
Scritto da: boxer
excellent
Heavy-duty steel, easy to install.
Scritto da: Robert Snow
As advertised
These leg brackets are perfect for building a raised deer blind. They are strong and once 4”x4” legs are installed and secured as per the directions, there is no swaying. I would highly recommend
Scritto da: mario g.
Great product!
Awesome product! My elevated blind is all set up and crossbow deer hunting starts next Saturday, here is Quebec! Can't wait to get there.
Scritto da: David B.
excellent product
very sturdy and easy to set up. As advertized
Scritto da: Amazon Customer
good quality
Really good looks really nice

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array