Supports d'outils Portamate pour supports de scie à onglets et centres de travail PM-7002

Name: Supports d'outils Portamate pour supports de scie à onglets et centres de travail PM-7002
Brand: Bora
SKU: 0733169936643
Price: 93.56 EUR
Availability: InStock

Brand:Bora

3.6/5

€
93.56

DESCRIPTION DU PRODUIT Si vous possédez un support ou un centre de travail pour scie à onglet Portamate, ces accessoires sont ce dont vous avez besoin pour y attacher rapidement diverses machines et outils. Ceux-ci se fixent à vos outils (scies à onglets, scies à chantourner, raboteuses, etc.) et fonctionnent avec la plupart des supports de scie à onglets PortaMate et des centres de travail (PM-3600, PM-3900, PM-4000, PM-5000, PM-6000, PM-6300 et PM-7000). La meilleure partie est que ces supports peuvent rester sur vos outils - ils sont stables et de niveau, et les avoir toujours sur vos outils signifie que le remplacement des machines sur votre support de scie/centre de travail Portamate est un jeu d'enfant (par exemple, il n'est pas nécessaire de déplacer les supports de d'un outil à l'autre.) Obtenez un ensemble pour chaque outil que vous avez l'intention de monter et transformez votre support de scie en une chaîne de montage polyvalente à changement rapide ! DU FABRICANT Les accessoires de machine à montage rapide PortaMate PM7002 vous permettent d'échanger des outils rapidement et facilement. Résistants, robustes et faciles à utiliser, ils vous permettent d'échanger des outils rapidement et facilement et maximiseront les capacités de votre établi. Compatible avec les modèles PortaMate PM3900, PM4000, PM4400 PM5000, PM6000, PM6300 et PM7000 Miter Saw WorkCenters.

Montant

Ajouter au panier Acheter maintenant

EAN: 0733169936643

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Lames de scie, pièces et accessoires, Accessories, Accessoires pour scies à onglet Accessoires de scie,

Le lot de 2 supports pour outils électriques fonctionne avec la plupart des supports de scie à onglet Bora Portamate. Les supports reposent à plat lorsqu'ils ne sont pas fixés au support et les outils peuvent être utilisés sur un établi ou une autre surface de travail. Fonctionne avec les scies à onglets, les routeurs, les scies à ruban, les scies à chantourner et de nombreux autres outils électriques. Fixez et détachez rapidement et facilement les outils électriques et les machines des supports d'outils.

Batteries Included?	‎No
Batteries Required?	‎No
Customer Reviews	4.5 4.5 out of 5 stars 247 ratings 4.5 out of 5 stars
Included Components	‎PM-7002
Is Discontinued By Manufacturer	‎No
Item model number	‎PM7002
Item Package Quantity	‎1
Item Weight	‎4.5 pounds
Manufacturer	‎HTC
Part Number	‎PM-7002
Power Source	‎Crank
Product Dimensions	‎22 x 9 x 6 inches
Usage	‎Professional
Warranty Description	‎1 YEAR

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: tuff

These are great they fit my vevor miter saw stand

These are great they fit my vevor miter saw stand. I contacted vevor to buy replacement and was told they don't sell replacement parts for there products.very sad at that and now will not buy from them again. Was so glad I found these and that the company sell extra parts for there stands. These work just as good as the ones that came with the miter saw stand and are built heavy to boot.i would definitely recommend these if you have a square tube miter saw stand..

Scritto da: Shari Stankiewicz

Nice gift

I ordered this for a gift. He said it worked wonderfully.

Scritto da: Amazon Customer

Best miter saw stand

Love my miter saw stands, swap tools is a breeze.

Scritto da: Jeremy J.

Always great to have more of these

Bought these mounts to add another object to my existing workstation I bought when they first came out. really glad I did as these came with an offset bracket that made it so I could get rid of the piece of plywood I had to make my miter box fit properly on these things. Love them. Love this whole workstation.

Scritto da: wjg

A must have...

I love this stand. So much that I purchased additional brackets for another saw.

Scritto da: Kenyon the foot

Broke clamp right away

Brittle plastic, glad I dint cut my arm off!!!!!

Scritto da: bmeneses

Good product. Good customer support

Well designed. Works well . End cap was missing on one of the arms. Customer support sent me one immediately.

Scritto da: C. Wagner

Adds flexibility to my shop; beware of release failure

These mounts fit both my Makita 10" sliding miter saw and my Delta benchtop planer, allowing me to swap them out as needed. The only downsides are the plastic end caps occasionally pop off and I suspect they are made in China. If you have more than one tool that could be used on your PortaMate, I recommend picking up a set of these for each, as it sure speeds tool setup and tear down. Update 2017/12/16: I've had this system for 10 years in my home shop. The convenience is great, however one of the release lever spring clips snapped while I was trying to move my miter saw the other day. It took a lot of strength and some scratches to avoid dumping my saw on the ground. Note that these levers have not had a significant number of compression cycles, as I tend to leave tools mounted for long periods of time. I recommend mounting your tool so the release levers are to the back. This will cause the tool to fall towards you and reduce the likelihood of significant damage or injury. Lowering the rating to draw attention to this defect.

Scritto da: AM

Flimsy plastic clamping components

Bought this for a bora stand. The part that attaches to the saw is made of metal (orange in the pictures). However, the bits that clamp on to the saw stand rails are made of plastic. Cheap plastic without fibre reinforcement. I tried to attach the clamps to the stand without the saw attached, just to feel them out. They were not very confidence inspiring. I would say if you have a 8-10" non sliding , basic saw then they may be ok. Anything larger than that, look elsewhere.

Scritto da: Newfy

Really great Tool Mounts

I needed a pair of mounts for my mitre saw stand. Mine had broken in a move. I found these online, ordered them, and hoped for the best. Well, best is what I got. They fitted and worked perfectly. Would not hesitate to order them again if/when I break them. Thanks Bora.

Scritto da: Amazon Customer

Fit Perfectly

Tool mounts purchased as Warehouse Deal at ⅔ the price of new and described as Used - Very Good condition. The mounts received were accurately described, possibly better than expected with all mounting hardware and paperwork included. The mounts fit perfectly - snapped easily onto the rail of my Portamate PM-7000 mitre saw stand right out of the box - very pleased with how this worked out!

Scritto da: Bryan Ekers

Be certain you have one of the tables in the specifications or one that is near-identical.

I cannot fault the product at all, but it was my own carelessness that led to me to make the mistake of ordering these mounts for my Ridgid AC9946 mitre saw stand, and found out the AC9946 is too wide. Sadly I had to return the Bora Portamates, but the return process itself was quick and easy and I got my refund promptly, so high marks for service, though the mistake was entirely mine. Thank you.

Scritto da: Rod Bosch

Worth the money

The quick mount works well to attach the mitre saw to the saw table and the quick release mechanism works well. You can’t leave the saw attached if you are going to stand the table on end for storage though, but perhaps that is a good thing.