US Window and Floor 2 stores en simili bois sans fil, s'adaptent aux fenêtres 22 1/2 - 22 3/4, (taille du store 22 1/8 x 36), montage intérieur 22,125 x 36 blanc lisse

Name: US Window and Floor 2 stores en simili bois sans fil, s'adaptent aux fenêtres 22 1/2 - 22 3/4, (taille du store 22 1/8 x 36), montage intérieur 22,125 x 36 blanc lisse
Brand: US Window And Floor
SKU: 0816282024029
Price: 82.84 EUR
Availability: InStock

Brand:US Window And Floor

3.6/5

€
82.84

La profondeur minimale requise pour monter le store est de 1 1/2 pouce. La profondeur minimale requise pour le montage encastré est de 3 pouces. Nos stores sont fabriqués avec des composants de haute qualité, y compris un rail supérieur en acier à profil élevé et des lattes en mousse PVC de qualité. Nos stores résistent à la chaleur et à l'humidité et sont parfaits pour tous les espaces intérieurs, y compris la cuisine, la buanderie et la salle de bain. Les instructions d'installation, une cantonnière décorative de 3 1/4, des clips de cantonnière, des supports de montage de baguette d'inclinaison et des vis sont inclus. Les retours de cantonnière ou les cantonnières de coin de fin ne sont PAS inclus. Les vis de montage fournies conviennent uniquement aux cloisons sèches ou aux plaques de plâtre. Ils ne sont pas destinés aux surfaces en béton ou en métal.

Montant

Ajouter au panier Acheter maintenant

EAN: 0816282024029

Catégories Maison et cuisine, Histoire et littérature, Traitements de fenêtres, Stores et abat-jours, Stores horizontaux,

Nos stores de haute qualité sont durables et résistants à l'humidité. Les lattes sont en PVC sans plomb. Ils nécessitent peu d'entretien et durent longtemps. Le mécanisme de levage sans fil offre une apparence plus moderne et plus propre à chaque pièce. Tenez simplement le rail inférieur pour soulever ou abaisser le store. Fournir un environnement sûr pour la maison avec des animaux domestiques et des enfants. Plus de cordons suspendus exposés. Tête de lit en acier robuste 2 x 2 1/4. Les stores sont livrés avec des instructions d'installation, des supports de montage, une baguette d'inclinaison, une cantonnière décorative de 3 1/4 (les cantonnières d'angle ne sont pas incluses), des clips de cantonnière et des vis. Ajustez les fenêtres à des largeurs comprises entre 22 1/2 et 22 3/4. (La taille réelle du store est de 22 1/8 x 36). 100% PVC.

Assembly required	No
Batteries required	No
Brand	US Window And Floor
Care instructions	Wipe away dust with micro fiber cloth when needed. For stains, mix one part of vinegar and one part of lukewarm water in a bow. Dip soft cloth into the mixture. Wring the cloth. Use the damp-dry cloth to wipe out the stains.
Color	Smooth White
Customer Reviews	4.5 4.5 out of 5 stars 6,312 ratings 4.5 out of 5 stars
Fabric Type	100% Pvc
Finish types	Smooth
Included Components	Blind, Tilt Wand, Inside Mount Type Majestic Valance without Returns, Valance Clips, Mounting Brackets, Screws, Installation Instructions
Item model number	CLF0102210360
Item Weight	5.54 Pounds
Manufacturer	US Window and Floor
Material	Engineered Wood
Mounting Type	Inside Mount
Number of Items	1
Number Of Panels	1
Number of pieces	1
Operation Mode	Manual
Product Dimensions	36 x 22.13 x 36 inches
Product Dimensions	36"L x 22.12"W
Recommended Uses For Product	Indoor
Room Type	All Interiors, Bedroom, Living Room, Dining Room, Kitchen, Kids, Nursery, Bathroom, Home Office
Size	22.125 x 36
Special Feature	Cordless, Wand Tilt
Specific instructions for use	Home Décor
Volume	533.81 Cubic Inches
Warranty Description	1 year manufacturer
Water Resistance Level	Not Water Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Janie

Pleasantly surprised

We recently renovated our kitchen and in the process decided to add a walnut frame around the inside of the kitchen window. Doing so, would tie it in with our walnut Butcher block countertops. We wanted some blinds that wouldn't take away or be distracting from the walnut picture frame so we decided to go with a window blind that would fit inside the window frame. These came out to be "perfect". The inside of our window measures 28 1/2. This window blind recommends for the opening to be at least 1/4" less than the blinds themselves. That means they recommend to purchase, in our case, blinds that are at lhe most 28 1/4" wide. Because these blinds are 1/8" more than the recommendation, I bought them. They should fit, it's just 1/8" difference. No biggie! Nope, nah uh, this came back to bite me bad!!! Upon opening the package, the valance that is included 1) stinks bad. This eventually goes away after a while. And 2) it is not "square" on either end (see pictures). They are off by like 1°. Since we are woodworkers, we have the tools to make them sqare. Which I did and trimmed to size. On this note, the valance is also longer than the blinds themselves by about 1/8". Not sure if this is done on purpose but I squared and trimmed to length with our miter saw. I suppose if you're not used to checking for square (like us woodworkers are) when installing anything, you wouldn't even know and all is well. Now, remember when I said the recommended width opening is 1/4" less than the window blinds? WELL.... once I TRIED to install the blinds, I have already secured the window blind brackets, b/c the 6 Phillips screws they provide (see pictures) have the head pertruting out (see picture) by about 1/8" on each side, the blinds do not want to slide in as the screw heads are blocking it from sliding and nesting in the brackets smoothly and freely. I mention 6 screws as I think they should include 2 more screws since each bracket has 4 holes in the sides. My solution was to replace the provided screws with some of my own that would have a not so much pertruting head. I replaced the Phillips screws with some pocket hole screws, however the heads of these screws also pertruted out. Not as much as the provided ones, but still enough to where I could not sit the blinds in properly in the brackets. So my next solution was to hammer the heck out of it BUT immediately stopped after I put a few, not-that-noticible dents in it. So, my next brilliant idea was to just sand the end of the blind header until it fit nicely. I only sanded about 1/32 off and this helped tremendously. If you notice on the pictures, the valance has about 1/64 of clearance (on each side) which is exactly what I wanted. The valance is also whiter than the blinds. The kit also includes these clear plastic clips that attach to the header of the blinds which you can later slide the valance in. As you can see from the pictures, sliding the valance is not an option for me at all. So, I had to remove the blinds, attach the clips to the header, place the blinds in the brackets again, secure them, and then I snapped the valance in the clip BUT just in the middle clip as I did not want to gamble in doing that again as it feels like it will literally snap on you. If you have the space to slide the valance in, do that. It is waaaay easier, faster and gives you peace of mind. Moral of the story; save yourself a headache and listen to what they recommend. I know if I would've purchased the recommended blind size, I would not have had to deal with the troubles I did. However, I would not have had such a clean tight look either. At the end of the day, it was worth it to me. But then again, I'm a woodworker. Also, to my pleasant shocking surprise, these blinds DO NOT have a cord to adjust the height of the blind opening. They're "automatic" so all you gotta do is pull from the bottom. Love this feature. Now this also means, Imma need to return these magnetic cord management clips I bought for that specific case. Oh well. To end, I would definitely purchase one again. Hope this helps anyone

Scritto da: Amazon Customer

Installation is simple and straightforward

This blind was the perfect modern replacement for my old venetian blinds for my kitchen window. Since I recently remodeled my old blind was looking old and dated. I would like to buy four more of these in the exact same size.

Scritto da: BigMack

Fantastic

Will by again. You could save so much money replacing your own blinds with these

Scritto da: mario wilmath

Solid sturdy and clean

Great blinds at a great price. They come in a heavy box with hardware and wood valence. The install is not easy. They fit within 1/4 inch of your measurement side to side. I use metal primed screws for these. They come with cheaper screws that will strip. You have to measure your lines correctly so the blind sits square on your window. It's hard to get the screws into the bracket holes all the way with a standard drill so you need an extension. A screwdriver won't get these in at all. The plastic hangers fir the valence are a bit hard to figure out, but they squeeze into the slot in the blind frame and are adjustable. The blinds tend to come in extra long lengths that aren't adjustable so I have a stack at yhe bottom of the window (better than too short). The color is off white to gray but nice in the light. Surface is smooth, not wood texture. All Platts are equal in size. Overall quality is excellent. You can see in last pic I got the level off at the top. You probably need a 2nd set of eyes /helper to install.

Scritto da: Pattye Casstevens

Perfect fir

Arrived within two days, Great fit and great price

Scritto da: kimberklr

worked great

especially like the cordless lifting. fit great super easy to install. valance is made for outside mount and i had to trim a small amount off for inside fit. but again easily done.

Scritto da: J D

Very nice blind

I was very surprised by how nice the blind is. I would definitely buy again. I really like the different sizes they offer. We have an odd size window. I followed the instructions on how to measure and the blind fit perfectly.

Scritto da: Amazon Customer

High quality blinds

This is my third set of these blinds. They are very easy to install and a very nice quality. I’m very happy with these blinds and will order again.

Scritto da: Sylvia W.

Great look

Easy to install. Fit perfectly for my laundry room window. Look great!