0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

WEN 10423 Blocs de précision 123 en acier trempé de 3 x 2 x 1 pouce, blocs de deux pouces (impériaux)

Brand:WEN

3.8/5

€
58.93

Comprend un ensemble de deux blocs 1-2-3. Étalonnez l'équipement, espacez les pièces ou collectez des mesures exactes. Dispose de 5 trous filetés 3/8-16 UNC percés. Chaque bloc mesure 3 x 2 x 1 pouces. Parfait pour les machinistes, les menuisiers, les métallurgistes et plus encore.

Aucune unité disponible

EAN: 0044459104230

Catégories Industriel et scientifique, Test, mesurer et inspecter, Etalonnage, Etalonnage dimensionnel, Blocs de jauge,

Comprend un ensemble de deux blocs 1-2-3. Étalonnez l'équipement, espacez les pièces ou collectez des mesures exactes. Dispose de 5 trous filetés 3/8-16 UNC percés. Chaque bloc mesure 3 x 2 x 1 pouces. Parfait pour les machinistes, les menuisiers, les métallurgistes et plus encore.
Country of Origin China
Item model number 10423
Manufacturer WEN
Product Dimensions 3 x 2 x 1 inches; 1 Pounds

3.8

13 Review
5 Star
83
4 Star
12
3 Star
3
2 Star
1
1 Star
1

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Darkwave Fan
They're exactly what they say they are. 3 x 2 x 1-Inch Steel-Hardened Precision Blocks
I used my caliper to check the dimensions. They're 3"x2"x1" to the precision level of my $12.00 digital caliper, which is plenty good enough for my needs. They are nicely finished. They came covered in some goop, which I imagine was to keep them from rusting. I cleaned them off, let them sit in my garage a day, for the odor to dissipate, and they're fine. I was confused about the threading at first, but the product info is clear. From the answered questions about this product: "The second and fourth rows have the outside holes threaded plus the middle of the third row is threaded. Five holes total are threaded. 3/8-16 UNC threaded."
Scritto da: Steve N.
Nice Setup Blocks
I’ve wanted a setup block for many years and finally decided to take the plunge, I thought I was buying one but to my surprise it is a set of two. Nicely made and will be useful to me.
Scritto da: Nate
1-2-3 Easy Peasy Quality
Yep. 1-2-3 lined up. Came well-oiled in paper, no rust, quality machining. Just what I wanted. All of the holes are not threaded if you expected such, but the ones in the corners are. Good stuff.
Scritto da: JG
Worlds worst harmonica…
Great for checking alignment of sawblades. I check all my 90° setups with these. Belt/disc sander, bandsaw, table saw, use it to guide my pull saw… Love it. Probably because it is a nice chunk of steel with holes in it. And it has some nice precision.
Scritto da: Bruce Markey
Surprisingly good.
Square, parallel, and on size (nominal). Bought 2 sets.
Scritto da: Sean P Phelan
Very Useful and Accurate
Very Handy to have around
Scritto da: Tinker, Hobbyist, Basic Machiner
pretty good slightly costly
Project worked great for project, delivery was insanely quick and helpful. If price could come down abit but project didn't require precision machinery gauging so buy price was based on convenience for project in hand right away.
Scritto da: Brandon Koll
Blocks
Great product. Sucked opening them as they are wrapped in a oil paper and are really greasy. I'm sure to prevent them from rusting as they are not coated with a clear coat . They are accurate and have many uses
Scritto da: A J Turrall
Great value for the money..
Great value for the money… other reviews seem to judge these as if they were gauges, but for this price, very useful 321 blocks for the hobby machinist..
Scritto da: Donald Robertson
Tool review
Excellent quality and delivered promptly
Scritto da: Monty M.
Good tolerances, good condition, pleased
The thru-holes are not bored out to pass a bolt for connection, I knew this before buying, and can work around that. Some have said their tolerances were way out, mine are within 0.0015” to 0.002”, stacked, very close considering a budget product, and more than sufficient for my home workshop. Pleased with this purchase. The thru-hole issue merits a 4 star review, however - if you just give everything 5 stars, nobody will trust a 5 star review, amirite?
Scritto da: Bartholomew C.
You a starting machinist? You are starting your CNC voyage? GET THIS
1-2-3 blocks are about precision, you get three true faces of precise dimensions and angle... usually they would cost you over 50$... but here... at this price, I have zero complaints... +/- 0.001mm maximum deviation on each side as verified by multiple precision calipers I have; that is.. one micron. I think this is more than acceptable for 99% of projects a home engineer can have. So Wen, thank you to give us access to this for this price. If I was very picky, I would only say that the corners are not perfectly deburred, at the corner of the rectangle, the edges are not perfect and 'curve' .. e.g. the chamfer created by the deburring process is not equal in width along the whole length but gets wider at the ends, near the vertex of the cuboid/rectangular prism. This doesn't affect the overall use, so I am very happy... unless you need to align at this precision, but then you'd be using some metrology quality blocks not this haha. Ok, so to everyone who has no blocks but uses a saw, get yourself a pair! Thanks again
Scritto da: S
You might think it's a nice to have item at first, but once you have it you'll use it
I sat on the fence about buying these WEN blocks for several months, but now that I pulled thr trigger, I find myself using them for a bunch of different of applications such as 90 degree squares, quick setup blocks foe my saws, stop blocks for my drill press, and gauging flatness when sanding small pieces. These are the cheapest blocks I was able to find online and in retail stores in my area. If you think you'll use them, just get them, there's so many uses for them you won't likely have buyer's remorse.

Produits connexes

hot
WEN 10423 Blocs de précision 123 en acier trempé de 3 x 2 x 1 pouce, blocs de deux pouces (impériaux)
3.8/5

€ 58.93

WEN 10423 Blocs de précision 123 en acier trempé de 3 x 2 x 1 pouce, blocs de deux pouces (impériaux)
3.8/5

€ 58.93

hot
Fowler 53-813-001-2 Micromètre et vérificateur de jauge à pression, ensemble de blocs de jauge de qualité AS-0, 53-813-001-2, plage de mesure 0,1-1, bleu, 9 pièces
4.1/5

€ 561.09

Fowler 53-813-001-2 Micromètre et vérificateur de jauge à pression, ensemble de blocs de jauge de qualité AS-0, 53-813-001-2, plage de mesure 0,1-1, bleu, 9 pièces
4.1/5

€ 561.09

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu