Yost Vises 480 8 Combinaison utilitaire robuste pour tuyau et étau de banc et étau de banc 20,3 cm

Name: Yost Vises 480 8 Combinaison utilitaire robuste pour tuyau et étau de banc et étau de banc 20,3 cm
Brand: Yost Vises
SKU: 0797734008364
Price: 726.57 EUR
Availability: InStock

Brand:Yost Vises

3.8/5

€
726.57

L'étau de tuyau et d'établi de la série Yost Vises Apprentice a une base pivotante à 360 degrés et se monte sur un établi pour fournir une action de serrage pour les applications légères. La base pivotante à 360 degrés avec (2) verrouillages, ajuste la direction des mâchoires pour un placement correct. Le serrage manuel du bouton de verrouillage sur la base sécurise sa position. L'étau a un corps en fonte avec une barre en U en acier pour plus de durabilité et une partie plate qui agit comme une enclume et une surface de travail supplémentaire. Les mâchoires supérieures en acier trempé peuvent être remplacées lorsqu'elles sont usées, et les mâchoires de tuyau en fonte intégrées sont rainurées pour une meilleure adhérence. Les mâchoires se rapprochent ou s'éloignent en tournant la poignée de l'étau dans le sens des aiguilles d'une montre ou dans le sens inverse des aiguilles d'une montre.

Montant

Ajouter au panier Acheter maintenant

EAN: 0797734008364

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils à main, Maintien au travail, Vis, Étaux d'établi,

GARANTIE : Livré avec une garantie limitée d'un an et un retour de 90 jours. INFORMATIONS DE SÉCURITÉ : Une mauvaise utilisation des étaux peut causer de graves blessures aux yeux, aux mains et/ou à d'autres parties du corps. Les étaux doivent être installés et utilisés correctement. Avant l'installation et l'utilisation, lisez, comprenez et suivez toutes les instructions décrites dans le manuel. Qualité Yost Vises : chaque outil Yost Vises est conçu pour avoir des normes élevées de qualité, de résistance et de durabilité. Nous privilégions la qualité à la quantité et fabriquons des produits sûrs et faciles à utiliser. Nous offrons un support technique à vie pour soutenir notre garantie de qualité. MODE D'EMPLOI : Assurez-vous que l'étau est solidement fixé à l'établi et que le verrou de la base pivotante est sécurisé. Ouvrez l'étau en tournant la poignée de l'étau dans le sens antihoraire. Placez l'article entre les mâchoires dentelées. Fermez l'étau en tournant la poignée de l'étau dans le sens des aiguilles d'une montre jusqu'à ce que l'article soit bien ajusté dans les mâchoires dentelées, continuez à serrer jusqu'à ce que vous ne puissiez plus déplacer l'article. Ne serrez pas trop car cela pourrait endommager l'article et/ou l'étau. Lorsque vous avez terminé de travailler sur l'article, tournez la poignée à vis dans le sens antihoraire pour libérer l'article. BASE PIVOTANTE: base pivotante à emboîtement à 360 degrés (à engrenages) avec (2) verrouillages qui ajustent la direction des mâchoires pour un placement correct; Languettes de montage de la base : (4) x 11/16 (matériel de montage non inclus). Caractéristiques techniques : largeur de la mâchoire : 8. 0 x ouverture de la mâchoire : 7. 50 x profondeur de la gorge : 4. 12,7 cm ; Capacité du tuyau : 1/8 x 3 de diamètre, les mâchoires du tuyau sont moulées en place ; 0. 67"D X 10. Poignée longue de 4" avec pare-chocs en caoutchouc ; 4. 13" X 3. Surface de martèlement de 63". Étau combiné : l'étau de tuyau et d'établi Yost Vises 480 8 pouces est fabriqué à partir d'une fonte grise de 30 000 PSI avec une barre en U en acier. Équipé d'une grande surface de travail d'enclume, il a également des mâchoires supérieures dentelées en acier trempé remplaçables et une mâchoire de tuyau dentée permanente de grande capacité.

Brand	Yost Vises
Color	Blue
Item Dimensions LxWxH	11 x 11 inches
Item model number	480
Item Weight	80 Pounds
Manufacturer	Yost Tools
Material	Cast Iron with Steel U Channel Bar
Style	Heavy Duty

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Doug Wade

Very nice vise. A lot more sturdy than I thought it would be

Shipped as advertised. Will last for years. The plastic pieces to fit on the jaws was not in my box.

Scritto da: Mike

Solid, sturdy, and smooth operation. Great vise.

I love this vise. I got the 5.5" one as an upgrade from my previous one which was often too small, or would slip on my workbench. My previous one was the kind that tightens itself on the the workbench but doesn't bolt in. The Yost 455 is the perfect size for my projects and allows me to bolt it down so it's easy to use. Let me share the bolts, washers, and locking nuts you will want to use for mounting this. There is some conflicting information in the Q&A and reviews. If you have a workbench where you can drill through the top, I can say definitively that the best way to mount it is use the base as a template and mark where the holes are in the base. Then use a 1/2" drill bit to drill holes through the tabletop. I used the following hardware which should work for anyone. You'll just need to adjust the bolt length for the width of your tabletop. Bolts: 1/2 in.-13 x 2-1/2 in. Hex Bolt (2.5" was the right length for my tabletop, you made need shorter or longer) Washers: 1/2 in flat washers with a 1 in outer diameter (OD) (1/2" inner diameter) Locking nuts: 1/2 in.-13 Nylon Lock Nut All the mounting hardware set me back about $11 at the local orange colored hardware store. It would have been nice if the hardware was included, but the vise itself is a great value regardless.

Scritto da: John Farrington

Solid and well made.

This is a solid and well made vise. Smooth, easy operation. This should last for years.

Scritto da: Tony

Good Value

I bought this blue Yost 455 Vise about 1 year ago and I am very happy with it. Most of my work is light duty, so I mounted it on a wooden work bench with a 2 x4 frame. For my light duty needs, I used 1/2" hex bolts to minimize 2 x 4 wall thickness loss. I then bought the RUITOOL brand blue colored 5.5" Vise Jaws Nylon Vise Block with Magnetic Soft Jaws, and I'm very happy with these soft jaws too. The Yost 455 and these soft jaws are an excellent match for my bench needs. If using a 2 x 4 frame for vise fastening, think about using a drill press or portable drill guide so that the drilled holes are straight. .

Scritto da: BaronR

No need to spend more

Very sturdy and good features.

Scritto da: Jeff

Vise has all the features of a bench vise.

Fit and function are good, it only weighs about 35 lbs, which means for a 5.5” vise its a bit light. Weight equates to sturdyness when looking at vises. It will work well for my needs.

Scritto da: Mattamuskeet

Poor QC

I tried buying a vise local first at Harbor Freight (HF), but returned due to poor casting and I wasn’t impressed by Home Depot’s offerings. I ordered the Yost 455 after a lot of research. Out of the box, this thing is not the best quality. The jaws do not line up and there is a lot of slop when the jaw is open. It also came with a nick in the metal from the manufacturer. Like the 5” “Central Forge” HF vise, this one is made in China, but at least the jaws lined up with no slop on the HF and it was only $60 compared to $85. Still this one is better in comparison and a decent value. I just wish they still made quality items in the US at a reasonable price because nothing I have bought from China has been what I would describe as 5 star quality.

Scritto da: William A McHale Jr

Great value!

I swore off buying any more garbage from harbor freight and figured that meant paying a lot of money for items like this. Yost company is from MI, USA. I couldn't figure out for sure where this is made but I don't care because I installed and used it today and am extremely happy with it. Build quality, fit and finish look great. Super value.

Scritto da: BL

Awesome tool

This seems to be of great quality for the price. Others I searched for were either too expensive or looked to be of cheap quality. Shown is a picture of it bolted to my workbench. For it's size it can open fairly large and the pipe jaw area is very handy to have as well. Also love the rubber gromets permanently attached to the handle. Rotating function is very useful and locks securely into position.

Scritto da: Aaron D

Great For Light Duty Home Use

Great for light to medium duty. Have this in my garage on a makeshift work bench I made out of an old table that was going to be thrown out. Bolted to table fairly easy with 4 carriage bolts, nuts and washers. Jaws open and close smoothly and hold whatever I am working on very well.

Scritto da: Simon

Good bang for the$

Good quality for the price and company as been around for a while. No it’s not a top brand but it’s a really good starting point that will last you years.

Scritto da: Harywood

A Nice Vice for a Good Price

My son wanted a vice for Christmas. I did some research and aside from the expensive Record vises, the Yost provides good features and performance at an affordable price. He's really happy with it.

Scritto da: Paul

Hapy with my Yost vise

I am very pleased with my Yost vise. Build-quality and precision seem to be very good, and the price was very competitive.