Bassett MCH-4R Serie Solid Carbide End Mill, onbeschichtet (hell) Finish, 4 Flute, 90 Grad Profilwinkel, Chamfer End, 0,58 Schneidlängt, 1/2 Schnëtt Duerchmiesser, 3 Längt (Pak vun 1) 1/2 Zoll

Brand:Bassett

3.2/5

67.26

Made an den USA. Uwendbar fir Stol, Goss, nonferro Material. Wann Dir am Géigesaz Richtung (riets Schnëtt) leeft, spiralgeschnidde Tools evakuéiere Chips erop an aus dem Schnëtt fir d'Verstoppung ze reduzéieren. Ronn Shanks erlaben Benotzung mat enger grousser Villfalt vu Toolholding Systemer. Onbeschichtete Tools weisen just de Basissubstrat ouni zousätzlech Behandlung oder Beschichtungen a si passend fir eng breet Palette vun Uwendungen. Solid Carbide Handwierksgeschir bidden laang Tool Liewen a méi séier Schneidgeschwindegkeet wéi aner Substrater, awer si méi brécheg a musse mat steife Toolholding Systemer benotzt ginn.

Made an den USA. Uwendbar fir Stol, Goss, nonferro Material. Wann Dir am Géigesaz Richtung (riets Schnëtt) leeft, spiralgeschnidde Tools evakuéiere Chips erop an aus dem Schnëtt fir d'Verstoppung ze reduzéieren. Ronn Shanks erlaben Benotzung mat enger grousser Villfalt vu Toolholding Systemer. Onbeschichtete Tools weisen just de Basissubstrat ouni zousätzlech Behandlung oder Beschichtungen a si passend fir eng breet Palette vun Uwendungen. Solid Carbide Handwierksgeschir bidden laang Tool Liewen a méi séier Schneidgeschwindegkeet wéi aner Substrater, awer si méi brécheg a musse mat steife Toolholding Systemer benotzt ginn.
Cutting Diameter 0.5 Inches
Cutting Length 0.58 Inches
Finish Type Uncoated
Finish Type Uncoated (Bright)
Material Carbide
Number of Flutes 4

3.2

10 Review
5 Star
66
4 Star
6
3 Star
17
2 Star
0
1 Star
11

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Shopper
Came chipped.
Probably a fluke, but tip and large chunk of a cutting edge were broken off.
Scritto da: Louis Pregler
arrived damaged
Arrived with the tip already chipped off. given that I am in a time crunch it'll have to work for what I'm doing.
Scritto da: Bob Painter, TurnKey Logic, Inc.
wrong picture.
Just received this yesterday and my initial thoughts were that it was the wrong item. Upon reviewing the order it does in fact list in the details that this is a single end not a double end mill (as pictured). As of now I'm thinking of keeping it, but was surprised to see it was only single sided. This is something I would pretty much always prefer double to save money in carbide replacement/ sharpening.
Scritto da: Richard Roberts III
Very nice.
Works as intended
Scritto da: Kevin
Works as it should
Not that chamfering is especially difficult, but this worked just fine on 6061 T6511. Indeed feels like solid carbide. Quick mic on the shank showed it accurate to 2 tenths.
Scritto da: Brandon R.
CNC Router Aluminum
Used it to chamfer/precision deburr aluminum on my CNC Router and works great. 1000mm/min, 0.25mm doc, 16000 rpm, climb milling
Scritto da: Jeremy
Good Value
Works excellent. Have been using on Aluminum and mild steel. Also used for engraving 316SS in a pinch, and it performed well a .004-.005 depth.
Scritto da: Cb
Amazing, so much better than deburing by hand!
Exactly what you would expect, fit into the collect perfectly, angle looks good.
Scritto da: R Burke
Works great
It’s my go to deburring tool. I never take it out of the machine!
Scritto da: Amazon Customer
4 Flutes
Tried with soft steel , OK

Zesummenhang Produiten

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array