Chicago Pneumatic CP875 - Air Die Grinder Tool, Welder, Woodworking, Automotive Car Detailing, Edelstol Polier, Heavy Duty, Rechtwinkel Grinder, 1/4 Zoll (6 mm), 0,3 HP / 220 W - 22500 RPM Wénkel / Tool CP875

Name: Chicago Pneumatic CP875 - Air Die Grinder Tool, Welder, Woodworking, Automotive Car Detailing, Edelstol Polier, Heavy Duty, Rechtwinkel Grinder, 1/4 Zoll (6 mm), 0,3 HP / 220 W - 22500 RPM Wénkel / Tool CP875
Brand: Chicago Pneumatic
SKU: 013297013370
Price: 118.36 EUR
Availability: InStock

Brand:Chicago Pneumatic

3.7/5

€
118.36

Beweist Äre patriotesche Geescht mat engem TrueTimber™ Kanati™ Freedom Steering Wheel Cover. Hiergestallt vun der séierst wuessender Camo Mark vun Amerika, ass dëse Cover aus engem haltbare Stretch Stoff mat Griffe gemaach, déi mat engem Stären-a-Streifen Muster wéi den amerikanesche Fändel geformt sinn. Dës speziell texturéiert Grip sinn net nëmme bequem, awer schützt Är Hänn virun extremen Temperaturen. D'Grips wäerten och d'Rutsch reduzéieren sou datt Dir méi Kontroll iwwer d'Rad fillt. Fans vun der grousser Fräien wäerten schätzen wéi de realistesche woodsy Look vum Kanati Camouflage Muster duerch fett roude Sträifen verbessert gëtt. Entworf fir d'Lenkrad vun 14,5-15,5 ze passen, ass et déi richteg Wiel fir Autoen, kleng Camionen, SUVs, a Crossovers. Erstellt mat engem Gerochfräien, net-Färzende TPE Polymer, de patentéierte EZ Stretch On Core Design bitt bis zu 40% méi Stretch wéi en traditionelle Gummikär, fir séier an einfach Installatioun ze garantéieren. Maacht eng Ausso während all Ride mat engem TrueTimber™ Kanati™ Freedom Steering Wheel Cover.

Keng Unitéiten verfügbar

EAN: 013297013370

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Power Tools, Grinders, Die Grinders,

Fonctiounen 1/4 an 6 mm collets. Gebaut-an Loft regulator. Chicago Pneumatic streamline Sécherheet Hiewel. Robust Aluminiumlegierung Kierper. Ideal fir limitéiert Plaz Uwendungen.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Chicago Pneumatic
Brand	‎Chicago Pneumatic
Customer Reviews	4.7 4.7 out of 5 stars 1,252 ratings 4.7 out of 5 stars
Finish	‎Clear
Horsepower	‎0.3
Included Components	Industrial HVAC;motor-accessories;
Included Components	‎Industrial HVAC;motor-accessories;
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎4.2 x 7.5 x 2.6 inches
Item model number	‎CP875
Item Package Quantity	‎1
Item Weight	0.5 Kilograms
Item Weight	‎0.5 Kilograms
Item Weight	‎1.1 pounds
Manufacturer	‎Chicago Pneumatic
Material	‎Metal
Maximum Rotational Speed	‎22500 RPM
Measurement System	‎Imperial
Number Of Pieces	‎1
Part Number	‎CP875
Power Source	Pneumatic-powered
Power Source	‎Pneumatic-powered
Product Dimensions	‎4.2 x 7.5 x 2.6 inches
Size	‎22,500 RPM
Sound Level	‎112.3 dB
Special Feature	Compact
Special Feature	‎Compact
Special Features	‎Compact
Style	‎Angled/Tool
Thickness	‎2.6 Inches
Warranty Description	‎1 year limited warranty
Wattage	‎220 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Ivan in Maine

Great tool.

Compact but sturdy. It does medium duty work very well. Criticisms: my 20 gal 1.6 hp compressor (5.4 cfm at 90 psi) runs constantly during continuous use. Consider that the minimum spec for a compressor if you’re going to be using it for more than a few minutes at a time.

Scritto da: STG

A Professional Tool That Works!

This little die grinder is amazingly powerful and smooth. I run it at around 110 psi. from a small 20-gallon 110V compressor and it works beautifully but since the tool consumes between 20 and 34 SCFM I cannot run it continuously for a long period. I have to give the compressor time to catch up every so often. The small size helps it fit into tight spaces and make maneuvering it around a complex work piece much easier. It comes with two collets, the American standard 1/4" size and the metric 6mm (which is slightly smaller that 1/4" by .35mm) so that if you buy the imported burrs and bits they can be securely fastened into the chuck. Other tools I have that are only 1/4" often can't tighten down sufficiently on a 6mm rotary burr shaft. This one works great. The two chuck wrenches that come with it include one that has the smaller jaw at a right angle that allows you to lay it parallel to the tool in use and hold it and the tool in one hand while you tighten the chuck with the other wrench. A genius design. The owner's manual makes no mention of the "built-in regulator" that is part of the tool description. I have included a picture of it. If you turn the inner screw, the tool adjusts its speed accordingly, which is really handy when driving something like a wire brush so it doesn't overspeed and throw wires around. The control is VERY touchy, but effective. I can slow it down to a crawl or up to its maximum 27K RPM with just a little turn of the regulator. The rear air discharge is diffused and out of the way so it doesn't blow chips around but, like every rotary air tool, quite loud, so I strongly suggest some hearing protection for long-term use. A few drops of air tool oil before use and a good supply of clean shop air and it will work for you all day. It is well made, hefty for its little size and quite powerful. The fit and finish are top notch at a very reasonable price.

Scritto da: Alex

The tool I hated that won't die, neglected & unoiled, will wirebrush the world as long as you don't try using cutoff wheels.

I read many great reviews on this product but it feels extremely underpowered each time I use it. It doesn't matter what pressure I run it at, it can barely turn a 3" cutoff wheel. About the only thing I can cut with it is air, because the minute it hits any metal, even small M6 bolts or very thin sheet metal, it just slows down and stops then I have to let off and let it accelerate again and let it do a tiny bit more. I understand that this is a smaller than average die grinder but it's pathetic how weak it is and short of cutting plastic with it there's not much else I can throw at it. It's about the same strength as a Dremmel, and there's a reason I don't own one. Update: So it's been a few years and I'm not sure what changed but I just realized I rely on this thing almost every day. I think maybe the problem was something with the safety mechanism in the trigger. Because once it got mangled and bent it allowed me to press it down harder and make it truly do the work it's supposed to. It doesn't jam up or slow down on anything. I don't use it with cutoff wheels any more (could have been part of the problem, those things suck in general) but mainly with a wire brush to clean everything from bolts to engine blocks. I got so sick of the safety mechanism I took my angle grinder and just carefully trimmed off the bits that hold the hinge mechanism for it, leaving a clean lever. Much happier now. Oh and I pretty much never oil it like I'm supposed to, because when I used to hate it before I thought I'd just hurry up and let it die to replace it. Not to say it runs completely dry, but it seems to keep surviving on whatever moisture and oil is found in the air from the compressor itself (18 cfm gas powered 30 gallon tank). And another reason I really hated this unit before is the insert close to the head that's designed to unscrew to allow disassembly for maintenance kept undoing itself almost every hour or two. Maybe I should have just threadlocked it or something but since like I said before I was sick of this unit so I kind of tapped the aluminum in place of the notch to keep it locked and unable to spin. I can't imagine ever having to take this unit apart to service it, when it dies I'll likely get rid of it and experiment with some newer air tools. Summed up: The tool I hated that just won't die, neglected and unoiled, will wirebrush the world as long as you don't try using cutoff wheels.

Scritto da: Kanaka

Plenty power for its size

Writing the review after having this tool for 6 years. Bought this because I wanted a compact grinder to get into tight locations. Over the past 6 years I have used it every once in awhile with good results. During the last 6 months I have used this grinder almost daily. I have used it with both carbide burrs, cut off wheels as well as Roloc abrasive discs. At 90 psi and a fair amount of cfm it doesn’t bog down. Great little grinder! I own several pneumatic tools made by Chicago Pneumatic. All of them have given me good service. For the past 35 years I’ve been a loyal customer. This little tool has proved its durability in my opinion and this is the reason why I am writing a review. I paid $54 for it and if it blew up tomorrow I would think that it was worth it! The only negative thing I have to say about it is that the safety trigger is hard to engage at times. That being said it is a minor inconvenience.

Scritto da: Steveoreno

5 years and over 1000 hours of heavy use its still going!

When it came time to replace my CP875 I didn't have to dwell on what brand I would buy. I have used this right angle grinder for years, running it for hours on end, given it minimal maintenance, abused it in every conceivable fashion and it is still working. In a body shop environment it gets used and used hard. During a marathon run it was used for so long in continues operation that ice began forming on the case and the operator used welding gloves to keep his hands from freezing and it ran flawlessly. In truth it probably has over two thousand hours of use and while it is getting pretty loose in the gears it still works just fine. Clearly the best deal I have found and I use Snap-On, and Blue Point...they are no better than this little CP unit. Don't hesitate...its a great tool for the money!!

Scritto da: MR.M.ROBINSON

Works great, doesn't stall too much under pressure.

Working in metalworks this tool comes in handy when using rolocs etc ????

Scritto da: peter

Die grinder

Good quality and very robust and powerful

Scritto da: Dazzler

Quality

Excellent product,very pleased with it

Scritto da: Mr T.

Quality tool

Great product, shame they don’t tell you it will take a month to arrive and you pay extra for import tax from the states.

Scritto da: SeaWar

Doesn’t come as advertised

I saw this angled grinder and loved that it came with the plastic molded case, and all the attachments and even some buffing-wheels to get you started. Very very disappointed when it came in a small cardboard box, no buffing-wheels and no plastic molded case. Item does NOT come as advertised, so don’t be fooled. The grinder is great, but I wanted what the seller was selling. So I contacted the seller and he/she said return it. No explanation and didn’t care it didn’t come as seen in the picture. I don’t recommend this buyer or this product…buyer beware. You won’t get what you think you’re buying. .