CURT 14082 Class 4 Trailer Hitch, 2-Zoll Receiver, Passt Select Ford, Chevrolet, GMC C/K Trucks

Name: CURT 14082 Class 4 Trailer Hitch, 2-Zoll Receiver, Passt Select Ford, Chevrolet, GMC C/K Trucks
Brand: CURT
SKU: 0612314140824
Price: 624.48 EUR
Availability: InStock

Brand:CURT

3.5/5

€
624.48

Déi éischt vu senger Aart, de revolutionäre SlōRoller benotzt patentéiert, Harvard Wëssenschaft, déi e Kamado Joe an ee vun de beschten Fëmmerten vun der Welt transforméiert. Duerch d'Verdeelung vum Damp an d'Hëtzt a Rollen, recirkuléierend Wellen, ëmginn de SlōRoller d'Liewensmëttel an de Wolleke vu leckerem Damp wärend d'Hëtzt gläichméisseg verdeelt - wat zu engem verstäerkten Aroma a wesentlech reduzéierter Hotspots resultéiert.

Keng Unitéiten verfügbar

EAN: 0612314140824

Kategorien Automotive, Aussen- Accessoiren, Ofschleefdéngscht Produkter & Winches, Hitches, Empfänger,

Einfach ze installéieren. Dës Klass 4 Hitch bitt e personaliséierte Fit op ausgewielte Modelljäre vum Chevy C30, C3500, C3500HD oder Silverado 3500, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty oder F550 Super Duty an GMC C3500, C3500HD oder K3500. RUST, CHIP, UV-RESISTENT. Dësen Seelschalter ass geschützt mat engem eenzegaartegen Dual-Coat Finish aus rostbeständeg flëssege A-Mantel an haltbare schwaarze Puddermantel. D'Finishen co-cure zesummen fir aussergewéinlech Resistenz géint Rost, Chipping an UV-Strahlen. VOLLZÄIT getest. All CURT Klass 4 Trailer Hitch Design gëtt an der realer Welt getest, op Gefier Konditiounen an eiser Detroit Ingenieursanlag. Hitches gi getest no SAE J684 Standards fir déi bescht Sécherheet an Zouverlässegkeet beim Ofschleefen. VERSATILE DESIGN. Dës Klass 4 Hitch equipéiert Äert Gefier mat engem Standard 2-Zoll x 2-Zoll Hitchempfänger, wat eng grouss Varietéit vun Ofschleefoptiounen erlaabt. Et kann e Ball Mount akzeptéieren, Seelhaken an aner schwéier-Pflicht Ofschleefdéngscht Accessoiren. Verlässlech Kraaft. Dësen Trailer Hitch ass fir 10.000 lbs bewäert. Brutto Trailer Gewiicht, 1.000 lbs. Zong Gewiicht, 12.000 lbs. Gewiicht Verdeelung Kapazitéit an 1.200 lbs. Gewiicht Verdeelung Zong Gewiicht (limitéiert op déi niddregsten-bewäertte Ofschleefdéngscht Komponent).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.5 4.5 out of 5 stars 100 ratings 4.5 out of 5 stars
Exterior	‎GLOSS BLACK POWDER COAT
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎14082
Item Weight	39 Pounds
Item Weight	‎39 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎14082
Material	Carbon Steel
Model	‎Class 4 Hitch
OEM Part Number	‎14082
Product Dimensions	‎42 x 9 x 20 inches
Vehicle Service Type	Pickup Trucks, Marine-Personal-Craft, Van, Sport-Utility-Vehicles, Truck, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Dan Loo

Seems to be great. Sturdy. Bolted right up to my skoolie

I have a 34" frame on my skoolie. This bolted right up. Seems very sturdy, and had no issues. Bolts seemed to be painted gold, like normal grade 8 bolts are. When I had to take one off all the color was gone and it looked like a normal bolt. Hopefully they'll hold up. I'd definitely get it again. I think it will work well.

Scritto da: Benjamin L.

Buy new drill bits

Fit my 1979 Chevy K10 shortbed perfect. Drilling the frame upside down isn't fun, get some new bits. I used some other Grade 8 hardware I had on hand since the squarer washers weren't contacting the frame. No big deal.

Scritto da: Anthony L

Quality hitch and hardware!

1986 GMC K35. I welded tubing to a floor jack and slid into the hitch for ease of mounting as there has to be holes drilled no matter where it’s positioned. Hardware is the best I’ve seen in a mounting kit. Wouldn’t hesitate to buy anything from Curt.

Scritto da: Noah Dater

Needed drilling and bumper removal, but looks great

Installed this on my 1969 c20 long bed. Needed to drill 2 holes on each side of the frame to bolt it up. I have a replacement aftermarket stock bumper and needed to remove it to install the hitch as the hitch bolts hit the bumper frame when you were trying to drop them into place. Also trimmed 3/8” off of the bottom of the license plate frame to get it to clear. Took an hour longer than expected, but looks great and is very heavy duty.

Scritto da: Marie Marcogliese

Will NOT fit a 73-91 Suburban... but did it say that???

I bought this hitch for obvious reasons: Class IV hitch for a class II price. Excellent! The BIG type said it fits my '87 Sub, but it won't w/out replacing/relocating my gas tank. Went back to Amazon site and found it says "in SMALL type: "This will fit your '87 Suburban. EXC CARRYALL/SUBURBAN/PANEL." So, WTF is it telling me it fits my 87 Sub? Dugh! Bottom line I'd like to keep this hitch as have been looking for a long time for this bargain. Can I make it fit and will it be a safe class IV hitch? We shall see. When I received the hitch I was ecstatic. Then utterly dismayed and angry when I found it didn't just bolt right up. This hitch is for pick up trucks w/straight 34" rails and a spare tire hanging underneath. NOT a Suburban w/a rear GAS TANK between the rails. Be warned! Read the SMALL print over and over, then triple check the manufacturers info... and then triple check it all again. The only consolation I have is that if I can't make it fit, then it was such a deal that I know I'll get my money back selling it on Craigslist to a guy with a Chevy PICKUP. Screw return shipping. As they say: "Buyer beware."

Scritto da: Ronda Jo Alleman

Bought the special deal damaged package scratched pant still usable.

Tow package was actually bent on both ends. It wasn’t a big deal for me I was able to porta power them out easy enough. But it would be a good idea to actually look at them stating chipped paint and delivering a bent tow package it’s really honest business practice. Paint was flawless the packaging protected the paint from whatever happened to it. Either way I was happy with it, but the next person might not be

Scritto da: Amazon Customer

Fits ford highboy

Bolted right up to my 1976 Ford F-250 4x4 aka highboy

Scritto da: Ricko

Well built & solid

The title says it all.

Scritto da: Diana

FIT PERFECT, ALL HARDWARE PROVIDED.

Fit great, all hardware provided. Would recommend this product from this company 100%.

Scritto da: Lee Martel

It fit as advertised

The hitch fit perfectly