CURT 45090 Class 3 Trailer Hitch Ball Mount, Passt op 2 Zoll Empfänger, 5.000 lbs, 1 Zoll Lach, 8 Zoll Drop, Glanz schwaarz Puddercoat

Name: CURT 45090 Class 3 Trailer Hitch Ball Mount, Passt op 2 Zoll Empfänger, 5.000 lbs, 1 Zoll Lach, 8 Zoll Drop, Glanz schwaarz Puddercoat
Brand: CURT
SKU: 0612314409006
Price: 105.13 EUR
Availability: InStock

Brand:CURT

3.8/5

€
105.13

CURT Klass 3, oder Standard-Pflicht, Ball mounts sinn e Schrëtt vun Klassen 1 an 2. Si Fonktioun engem 2 x 2 shank an hunn eng méi héich Gewiicht Kapazitéit fir Ofschleefdéngscht schwéier-Pflicht Unhänger, dorënner Utility Unhänger, Boot Unhänger, campers, Single-Päerd Béischten Unhänger an déi meescht Fräizäit Gefier Unhänger. Mat Klass 3 Unhänger déi am meeschte verbreet Typ vun Unhänger fir Pickup Camionen an SUVs ass, ass de Klass 3 Kugelmontage, duerch Associatioun, en exzellente Ergänzung zu dësem Unhänger an dëse gréissere Gefierer (NOTE: Iwwerschreift ni déi niddregst Gewiichtskapazitéit vun all Ofschleefkomponent; dh d'Gefier, d'Hitch, den Trailer, etc.). Dës speziell Klass 3 Kugelmontage kann an der Droppositioun benotzt ginn fir e Réckgang vun 8 ze bidden, e Brutto Trailer Gewiicht Kapazitéit vu 5.000 lbs. an eng Zong Gewiicht Kapazitéit vun 500 lbs. Et kann och ëmgedréint ginn fir en Opstieg vu 6 ze bidden, eng Brutto Trailer Gewiicht Kapazitéit vun 3,500 lbs. an eng Zong Gewiicht Kapazitéit vun 350 lbs. Et huet eng Längt vun 11-1/2. Klass 3 Kugelmontage si CNC-geformt a robotesch geschweest fir onwahrscheinlech Präzisioun an zouverlässeg Stäerkt an all Eenheet ze garantéieren. Mir entkalken all eenzel mechanesch fir eng glat Uewerfläch fir e laang dauerhafte Finish ze bidden. Dëse Klass 3 Kugelmontage kënnt mat engem haltbaren glänzenden schwaarze Pulverlackfinish fir géint Korrosioun, Kratzer, UV Schued a méi ze schützen fir et déi déck Haut ze ginn déi se brauch fir op d'Strooss virzegoen.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0612314409006

Kategorien Automotive, Aussen- Accessoiren, Ofschleefdéngscht Produkter & Winches, Hitches, Empfänger,

Steigerung: 6 an EINFACH AN INSTALLEREN. Fir dës Klass 3 Hitch Ball Mount op Ärem Gefier z'installéieren, setzt einfach de Shank an den 2-Zoll Hitch Empfänger vun Ärem Gefier. De gerundéierte Schank mécht d'Installatioun einfach. Dann, befestegt de Schank op der Plaz mat engem Hitch Pin (getrennt verkaf). CORROSION-RESISTENT. Fir laang dauerhafte Gebrauch ass dëse Kugelhahn geschützt mat engem haltbare schwaarze Pulvermantelfinish, liicht géint Schued vu Reen, Dreck, Schnéi, Stroossesalz an aner korrosive Gefore widderstoen. PRETT ZE SCHLEEPEN. Ären Trailer opzehänken ass einfach mat dësem 2-Zoll Kugelmontage. Et huet en 1 Zoll Lach fir en Trailer Hitch Ball mat engem 1 Zoll Duerchmiesser Shank ze akzeptéieren (Trailer Ball getrennt verkaf). VERSATILE BENOTZT. Dësen Trailer Hitch Ball Mount kënnt mat engem 2-Zoll x 2-Zoll Shank fir quasi all Industriestandard 2-Zoll Empfänger ze passen. De Ball Mount huet och en 8-Zoll Drop a 6-Zoll Opstieg fir den Niveau ze förderen. Verlässlech Kraaft. Dëse Ball Hitch ass aus héich-Kraaft Stol gebaut an ass bewäert fir bis zu 5.000 Pond Brutto Trailer Gewiicht an 500 Pond Zong Gewiicht an der Lëscht Positioun ze zéien (Opstieg Positioun: 3.500 lbs. GTW, 350 lbs. TW).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.8 4.8 out of 5 stars 792 ratings 4.8 out of 5 stars
Exterior	‎Painted
Finish Type	Gloss Black Powder Coat
Is Discontinued By Manufacturer	‎No
Item model number	‎45090
Item Weight	10 Pounds
Item Weight	‎10 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎45090
Material	Carbon Steel
Model	‎Class 3 Ball Mount
OEM Part Number	‎45090
Product Dimensions	‎16 x 9 x 3 inches
Vehicle Service Type	Pickup Trucks, Marine-Personal-Craft, Sport-Utility-Vehicles, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Tony T

Quality Hitch

Hitch seems very sturdy,works well on my Yukon

Scritto da: mike

Works great

Works great and the drop was perfect for my trailer

Scritto da: kindleuser

Using for Antenna Mount

Had to shim the hole for antenna bolt but works great. Sturdy with optional anti rattle clamp.

Scritto da: T-Bone

Solid

Solid hitch. Drop was just what I needed for hooking up my 1962 Airstream to a Subaru Accent. The height of the Subaru made the trailer pitch up. The 8" drop was just right. It is a bit longer than my old straight hitch so I needed to extend the safety chain. Definitely recommend it.

Scritto da: waltbobjr

Worked on My 2005 Sienna

Used on my 2005 Sienna with a Curt receiver. Top inside of my receiver was 10" above ground and I wanted the 6" rise to get up toward 17" total. There are no standards, but my goal was to use Home Depot trailers (and maybe U-Haul 4x8 Box trailer) and when I stopped at store I measured the trailers at about 17-18". Used with Curt 40004 ball and with the Curt 45007 sleeve as there are no indents or tabs on this mount to keep ball from rotating as it is tightened. The Curt 45007 tongue sleeve worked perfect (albeit pricy) and was able to install and remove balls with one wrench. There has been some reviews that expected Curt products to be made in USA. I can confirm that all the Curt products I bought: the 45090 mount, 40002/40004 ball, the 23590 anti-rattle kit, the 45007 sleeve, and the 20001 wrench are made overseas (mostly China). Black powder coat is nice, but is is chipped/scratched/damaged in many places as these mounts are not individually boxed. I fully expect it to start rusting immediately once exposed to elements. On the other hand, I don't leave it attached, but keep it in a hitch tote bag in the trunk. With 2" ball mounted I was just able to squeeze into the Classic Accessories 74877 Hitch Tote, but most definitely pushing the tote over the recommended limit. All that said, I was prepping for a future tow and I haven't confirmed that my choice of 6" rise is correct for the 2005 Sienna application.

Scritto da: HMD

Heavy steel

It is a heavy hitch that does a great job at hitching things.

Scritto da: Michael Haynes

Looks great, Works great

Powdercoated finish looks great. A little damaged in shipping but that’s to be expected with something this heavy. Has held up great so far

Scritto da: wook1

Perfect for my Highlander

CURT quality. Rock solid. Heavy (I usually hang my car and boat accessories but this just has to sit on my workbench when not in use. Not a problem). And, most importantly, it is the perfect fit (inverted as a rise) for my 2013 Highlander to connect my boat trailer. Add to that an equally solid hitch pin/cotter pin combo (Curt 21510 available here on Amazon) with rubberized coatings on the ends of each for grip and I'm a happy traveler. Highly recommend. Note: I had to try a couple to find the right rise because simple measurement isn't exact, since the car also sinks when you add the weight to it (and Highlanders have REALLY soft suspensions. Its SUV height/center of gravity on a Camry platform. I'm talking windshield wipers move the car when sitting still soft.) It may seem obvious but if you're a newbie to trailering like I was, be sure to test with your max load on the trailer to see how both car and trailer sit. Hope this helps.

Scritto da: gris

Yep... it' a hitch

Seemed like a decent enough hitch at a decent price. For some reason though there was quite a few notches in one side (lf) of the long steel bar that the ball bolts too. Looked like someone hit it a half dozen time with an ax, cold chisel, or other sharp object. Had to use a file to take the sharp edges off to prevent cutting hands or fingers when handling. So much for the anti-corrosive coating. LOL The hole for the ball was a bit off centre too. Other than those concerns, and the need to get new longer safety chains for my trailer, with the new 8 drop, tows fine and the trailer rides level.

Scritto da: randall fenn

Nice hitch

This product is very well-made and very strong

Scritto da: Random Dad

Fits my Dodge Caravan with slight modification.

The tube on this could be an inch longer. It rubs against my bumper. So I took an angle grinder and removed a small countoured bite out of the triangular reinforcing plate. Now it fits my 2015 Caravan nicely and does not contact the bodywork.

Scritto da: Yvon rocheleau

First class

First class

Scritto da: Guillaume Demers

Five Stars

Great car rear protection :) Haven't actually bought it to trail anything.