Dremel 231 Portable Rotary Tool Shaper and Router Table - Holzbearbeitungsbefestigung Perfekt fir Schleifen, Formen a Kanten ze trimmen

Name: Dremel 231 Portable Rotary Tool Shaper and Router Table - Holzbearbeitungsbefestigung Perfekt fir Schleifen, Formen a Kanten ze trimmen
Brand: Dremel
SKU: 0043912390685
Price: 89.44 EUR
Availability: InStock

Brand:Dremel

3.5/5

€
89.44

Maacht dat Bescht aus Ären Dremel Rotary Tools andeems Dir eis innovativ & extensiv Linn vun Rotary Accessoiren an Uschlëss benotzt. Wat och ëmmer Äre Projet, mir hunn déi perfekt Léisung fir Iech. Dremel Uschlëss passen op Ärem Rotary Tool fir et eng speziell Funktioun ze ginn. Egal ob Dir sicht ze schneiden, ze gravéieren, ze schneiden oder ze schleifen, et gëtt en Dremel Uschloss fir d'Aarbecht gemaach ze kréien. Konvertéiert Äert corded Rotary Tool an e liichtfäerdegen, benchmontéierte Präzisiounsholz Shaper mam Dremel 231 Shaper / Router Table. Den 231 Uschloss ass einfach op all Tabletop Aarbechtsberäich montéiert, an ass kompakt an einfach ze späicheren wann net am Gebrauch. De Shaper / Router Table wierkt als e klenge Router-Dësch, deen et einfach mécht fir Stécker, Kanten, Groove an / oder Sand Elementer a béid konventionell an onregelméisseg Formen ze schloen. Mat einfach ze gripen Plastikknäppchen, déi e Schrauberschlauch enthalen fir méi einfach Toolmontage an eng Tiefejustéierungsschraube déi Iech erlaabt Iech un déi gewënscht Schnëttsdéift unzepassen. Den 3-Wee verstellbare Fiedem erlaabt genee Detailer a Finish wärend de kompakten & glaten 8 In. x6 eng. worktable ass ideal fir Liicht-Pflicht Detail Projeten. Kompatibel mat de meescht Dremel corded an cordless Rotary Tools a ënnerstëtzt vun enger 1-Joer limitéierter Garantie.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0043912390685

Kategorien Tools & Home Verbesserung, Power & Handwierksgeschir, Power Tool Parts & Accessoiren, Router Deeler & Accessoiren, Router Bits, Randbehandlung & Grooving Bits,

Kompatibel mat Dremel Tool Modeller: 100, 200, 3000, 4000, 8220, 8240, 8250 an 8260. Den 3-Wee verstellbare Fiedem erlaabt genee Detailer a Finish wärend de kompakt & glat 8 In. x6 eng. worktable ass ideal fir Liicht-Pflicht Detail Projeten. Fonctiounen einfach ze gripen Plastik Knäppercher déi e Schrauwendréier Slot enthalen fir méi einfach Rotary Tool Assemblée an eng Déift Upassung Schraube erlaabt Iech un déi gewënscht Déift vun Schnëtt unzepassen. Montéiert einfach op all Tabletop Aarbechtsberäich an ass kompakt an einfach ze späicheren wann net am Gebrauch. Konvertéiert Äert corded Rotary Tool an e liichtfäegsten, benchmontéierte Präzisiounsholz Shaper mam Dremel 231 Shaper / Router Table; mécht et einfach ze Slot, Rand, Groove an / oder Sand Elementer a béid konventionell an onregelméisseg Formen.

Base Type	‎Fixed
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Dremel
Brand	‎Dremel
Color	‎Multi
Country of Origin	‎Taiwan
Customer Reviews	4.4 4.4 out of 5 stars 3,343 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎bare-tool
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎231
Item Package Quantity	‎1
Item Weight	975 Grams
Item Weight	‎2.15 pounds
Item Weight	‎975 Grams
Manufacturer	‎Dremel
Material	wood
Material	‎wood
Number Of Pieces	‎1
Part Number	‎231
Power Source	Corded Electric
Power Source	‎Corded Electric
Style	‎Portable Rotary Tool Shaper
Voltage	9.6 Volts
Voltage	‎9.6 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: THW

Works with Milwaukee 2460-20 Rotary Tool!

I must admit that I was disappointed when my 1975 Dremel model 370-5 Mototool would not tighten completely into my new Dremel 231 Portable Rotary Tool Shaper and Router Table. I didn't expect it to, as it was not included in the list of Dremel models that would, but the description said "with most ", so I went ahead and ordered one from Amazon, which arrived the next day. After seeing that my old Dremel wouldn't work, I was about ready to look up the current Dremel models when the thought occurred to me that I should check my new Milwaukee model 2460-20 M12 Rotary Tool. It fit perfectly!. I just removed the nut like the Dremel and screwed it to the table. Still uncertain if I would keep the table, I clamped it to my bench with two Irwin Quick Grips and chucked in a router bit from the old Dremel. I was disappointed again to find that the round dowel that I was going to rout would not slide across the gap in the fence. I solved that with a piece of square PVC framing stock and two screws through holes in the Dremel's fence. The piece cut cleanly and straight. Success! The unit is made mostly from plastic, and isn't as rigid as I would like, but still very workable and a great value at the price. I wish that they had this back in 1975 when I bought my first Dremel. It still runs smoothly even after two or three sets of brushes. If this table lasts half as long, I will have gotten my money's worth.

Scritto da: David D.

worth the money

it was worth the money but I had to modify the mount to make it more stable while putting pressure on the router bit. it moved without the modification.

Scritto da: Hurcinio R.

It was handled with no care

Sadly, to say that the mailman didn't handle the package with care he lunches the box from very long distance and damage the box gladly the tools were okay ????

Scritto da: Fri3dT0fu

Great setup for a miniature shop

I've been wanting a mini router for years and always hesitated buying this because I have an old off-brand rotary tool. I finally ordered it, thinking that for that price, I could always try to modify it or just return it. I'm so glad I took the chance! If your rotary tool has a collet that reveals screw threads under it to mount it, this will work for you. My Flex Shaft rotary tool would not fit in it, for example. But that's the one I use at my desk, so having the other rotary tool dedicated to the router is perfect. I wouldn't want to have to mount/unmount the Dremel every time I use the router setup. When you screw the Dremel on, make sure you tighten it all the way with the provided wrench, and that the little push knob to screw/unscrew the router bit is facing the front opening. If you don't screw it in all the way, the Dremel will be wobbly. The fence has enough little notches that you need to cover it with a piece of wood so your pieces don't get caught on them. And they must know that because there are two holes already provided to secure the additional wooden fence with a machine screw and a bolt on the reverse. Make sure you countersink the wood so the screw doesn't stick out. Mount the whole setup on a plank, so you can clamp it to a workbench, or whereever you need it, but then put it away when you're done. As far as the performance, I want to manage your expectations. This isn't meant to be a full size router. I make dioramas and use mostly basswood or small wood dowels for trim moulding. Even then, the trims can be a tiny bit off in places, but are decent enough. There's a tiny bit of give if you try to trim off too much material at once, so if you're cutting deep, do it in stages. And watch your fingers, it still has quite a bit of pull, even for a tiny setup. Make yourself a push stick! So overall, if you do miniatures, this table is a great value for the price!

Scritto da: Peter J. Ott

Great router table for small applications

Gret find

Scritto da: Tom

Durable

Easily attaches to work table

Scritto da: Joseph Oaks

Great rotary table for small projects!

This is a great little rotary table for small projects. This table can use almost any type of dremel.

Scritto da: Va.Geo

Needed this more than I thought...

Bought for a specific project, wound up becoming my go to for small wood projects.. Comes with mounting screws, love the slider for those pesky,funky jobs I always seem to wind up with.. Thick,quality fibrous plastic, this mount has earned a spot in MY hall of fame ;)

Scritto da: frank lackenby

Great for miniature work.

I made both the hand rail and base rails in the photo. I’m not gonna try and convince you about dremel. I love em. I’ve got 4. I build dolls houses. If you want to work in miniature then you need one of these. Great addition to my tool kit.

Scritto da: Pandiya Kumar. R

Don't purchase this item If u want to purchase u ...

Don't purchase this item If u want to purchase u should buy machine otherwise it will not match other make machine

Scritto da: Amazon Customer

Useful but with reservations

Great accessory for the dremel multitool when using router tool, but has insufficient rigidity when cutting to a template, i.e. the multitool will flex it it's housing. So it is limited to cutting light materials such as plastics, veneers, etc. The Proxxon range of tool may be a better option for heavy duty work.

Scritto da: GH

Give it a try, I did

Took a while to arrive. Apart from poor reviews I read, I think it is great value for money. It is excellent for the wood craft projects I build. Try for yourself and do not expect industrial standard at this price.

Scritto da: alan hamling

It is a vey good piece of kit for the price.

I am finding this a very good addition to my modelling tool kit.