ENERLITES 4-Stonne Countdown Timer Schalter, 5-10-30-60 Min, 2-4 Stonnen, fir Buedzëmmer Fans, Heizungen, Luuchten, LED Indikator, 120VAC 800W, Keen Neutral Drot erfuerderlech, UL Listed, HET06-J-LA, Liicht Mandel 1 Pack 4 Stonn Liicht Mandel

Name: ENERLITES 4-Stonne Countdown Timer Schalter, 5-10-30-60 Min, 2-4 Stonnen, fir Buedzëmmer Fans, Heizungen, Luuchten, LED Indikator, 120VAC 800W, Keen Neutral Drot erfuerderlech, UL Listed, HET06-J-LA, Liicht Mandel 1 Pack 4 Stonn Liicht Mandel
Brand: ENERLITES
SKU: 0883951778651
Price: 47.10 EUR
Availability: InStock

Brand:ENERLITES

3.2/5

€
47.10

Den ENRLITES HET06-J-LA programméierbare Timerschalter huet en einfachen a modernen Design, deen en effektiven Upgrade fir all Heem oder Büro mécht. Dësen Timer Liichtschalter huet e manuelle ON/OFF Knäppchen a sechs Preset Timer Knäppercher: 5 min, 10 min, 30 min, 60 min, 2 Stonnen a 4 Stonnen. All Lasten, déi mam Schalter Timer verbonne sinn, schalten automatesch aus wann d'preset Zäit ofleeft. Benotzt dësen Timer Wandschalter fir Luuchten, Plafongsverkleedung, Buedzëmmer Fans, Heizungen a méi ze kontrolléieren! De Countdown Timer Schalter bedreift effektiv Luuchten oder Fans fir sécherzestellen datt en Apparat ni falsch gelooss gëtt. D'Countdown Timer Feature hëlleft Iech Energie ze spueren a reduzéiert de Risiko vun elektresche Bränn andeems Dir garantéiert datt d'Fans net fir länger Zäit lafen. Dëse Fan Timer Schalter ass kompatibel mat de meeschte Luuchten, an et ass einfach ze benotzen vu Leit vun all Alter. Et ass UL opgezielt an enthält eng 1-Joer Garantie.

Keng Unitéiten verfügbar

EAN: 0883951778651

Kategorien Tools & Home Verbesserung, Elektresch, Schalter & Dimmer, Wandschalter, Timer Schalter,

Liicht Mandel; NEUTRAL NET NËMMEN, Buedem Drot néideg; 120VAC 60Hz, Glühwäin/Halogen: 800W, LED/CFL: 150W, Motor: 1/4Hp; Betribssystemer Temperatur 32 ° F ze 131 ° F; UL 94 V2 Brennbarkeet Bewäertung; UL opgezielt; 1-Joer Garantie. Perfekt fir Luuchten, Plafongsverkleedung, Buedzëmmer Fans, Heizungen, an all aner Apparater déi allgemeng vergiess ginn. Blo LED Indikatoren fir zwee Modi ze weisen; Modus 1: LED blénkt zweemol wat den Erfolleg vun der Astellung ugeet, da bleift OFF; Modus 2: LED bleift ON während der gewielter Zäitverzögerung a schalt dann aus. Sechs Countdown Timer Optiounen fir ze wielen aus 5 min, 10 min, 30 min, 60 min, 2 Stonnen a 4 Stonnen; manuell ON/OFF Knäppchen iwwerschreift den Timer. Schalt automatesch eng Laascht OFF op engem Countdown Timer; spuert Energie andeems Dir suergt datt d'Liicht oder de Fan ni per Feeler ON gelooss gëtt.

Brand	ENERLITES
Color	Light Almond
Country of Origin	China
Human Interface Input	Buttons
Item model number	HET06-J-LA
Manufacturer	ENERLITES
Material	Plastic
Number of settings	6
Product Dimensions	4.05 x 1.73 x 1.7 inches; 4.23 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: J. Lin

A few surprises here

The width of the unit is wider than many older devices, and I found that it actually interferes with the screw hole for the “old work box” I had in the wall. I don’t know when this box was bought and installed, but the design had the locking screw inside the box area, and it just runs into this switch so you can’t tighten down. Newer “old work” boxes have full interiors, so I wouldn’t expect any modern retrofit to have this issue. Also, on first power on, the device is auto on for 5 minutes, and then everything works. I thought I might have shorted something as it was on and kept going and manual actuation didn’t work to turn off. After 5 min (maybe less…), the 5 min LED flashed and everything worked as normal. A similar thing happened with a GE device that looks identical to this one, so it’s not a unique issue, I guess.

Scritto da: Amazon Customer

Install and wait 5 minutes, The device must have an internal battery or some type of delay,

Install and wait 5 minutes, The device must have an internal battery or some type of delay, This was mentioned on 1-2 install videos so if the fan does not work immediately... give it a few minutes. Works great. The over ride (holding down the power button for 8 seconds is very nice when painting the bathroom and you want the fan to run overnight and manually push the power button again to cancel the override.

Scritto da: Nacreous

My second one. The first one died after several years in service.

It’s a nice exhaust fan timer with option times to suit anyone. It was a bit difficult to cram the device, wire nuts & everything into the 4-by-4 box, but I eventually got it all in and working. It has an odd quirk where it appears to be dead upon first power-up. I hooked it up and turned on the breaker and… nothing. No lights, no on-off action on any button. I was about to start removing the wire nuts to see if there was a bad connection, when I pushed a button again and saw it was working. It seems to take almost a minute after power is applied to start working, so be patient.

Scritto da: Jim Bob

Excellent switch

Used for bathroom fans. Good instructions. Easily installed. Looks great. Simple to use. Be careful to order the correct one based on your home’s wiring. Wired with a separate load wire or without a load wire. Research can be done on You Tube for what is a load wire and how to find it in your wiring. If you are not a DYI person, hire an electrician.

Scritto da: MLO

Good reliable product

Works as it should. The only down side is that after you select time interval (push appropriate button) the LED on it just blinks and does not stay on, so another person would not know what the selection was. Not critical, but I like other design , when LED stays on after selection

Scritto da: Anon

Works as advertised; nice functionality & design

Liked the "idea" / concept of this invention, especially that you do NOT need a neutral inside the box. It works as advertised and will definitely save me money on electricity costs in the long run. One hint for improvement: This version has 6 time selections, but that means those 6 buttons are rather small ... and get very small letter fonts on each. So consider a version with only 4 larger button choices? For example, 5 min + 20 min + 60 min + 2 hours would be appropriate / sufficient and likely cheaper to build / buy too. After all, nobody if going to squint-to-read or memorize all 6 button selections in current version, but 4 would be right. Otherwise very satisfied with timer buttons because motion sensing switches are very unreliable in odd shaped rooms like basements.

Scritto da: hookedinseattle

Easy to install. Check your current switch first.

Easy to install. Should have put these in earlier. Make sure you check your existing switch for correct wiring.