0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Ingersoll Rand ARO F35341-400-VS Air Line Filter, 1/2 NPT - 150 psi Max Inlet, Black

Brand:ARO

3.5/5

€
104.22

PRODUKTBESCHREIWUNG ARO-Flo 2000 Serie Inline Filter-1/2 NPT Port-197 SCFM-3 Micron Filtration-150 psig Max Inlet Pressure-23-125°F Temperaturbereich-Polykarbonatbecher w/ Garde-Manuell Drain AMAZON.COM Entworf fir entfernen d'Loftfest a flësseg Verschmotzungen (kuckt méi grouss). Dem Ingersoll Rand säin 1/2 Zoll Weiblech Threaded Air Filter (Modell F35341-400-VS) hëlleft ongewollt Dreckpartikelen a Kondenswasser aus Ärer Loftlinn ze halen fir eng korrekt Loftpräparatioun. schützt géint Impakt. Rescht einfach ze wëssen datt Dir Är Ingersoll Rand Tool Investitioun schützt mat engem Ingersoll Rand Premium Loftfilter. IWWERT INGERSOLL RANDIngersoll Rand designt, baut a liwwert en oniwwertraff Sortiment vun haart schaffende Produkter a Léisungen. Ingersoll Rand ass eng Multi-Milliarden Dollar weltwäit Firma déi e Ruff opgebaut huet fir hir Clienten fir méi wéi engem Joerhonnert op a lafen ze halen. Vun eise komplette kompriméierte Loftsystemer, bis zu eise Tools, Pompelen, Material Handling Systemer an ëmfaassend Servicer, Ingersoll Rand bitt d'Déift vu Wëssen, Expertise, an Erfahrung déi bescht Léisung fir Är Besoinen ze treffen.F35341-400-VS 1/2 -INCH AIR LINE FILTERAT E BLANCE * Entworf fir Loftversuergung fest a flësseg Verschmotzungen ze entfernen * 1/2-Zoll NPT, 197 CFM * 5-Mikron Filterelement * Zuverlässeg manuell Drain * 1,9-Unze Schossel mat Schutz VUM Produzent ARO-Flo kompriméiert Loftfilter sinn entwéckelt fir Loftverschmotzung fest a flësseg Verunreiniger ze entfernen. Filtere kënne mat verschiddenen Elementer bestallt ginn, dorënner Koalescéierungsmodeller déi fäeg sinn Uelegaersolen a Partikelen bis 0,3-Micron ze läschen. Standardfilter gi mat 5-Micron Elementer verkaaft; 40-Micron Elementer kënnen kaaft a separat installéiert ginn. Méi gesinn

Keng Unitéiten verfügbar

EAN: 0785533876239

Kategorien Industriell & Wëssenschaftlech, Filtratioun, Kompresser Loft Behandlung, Filteren, Reguléierer & Schmiermaschinnen, Filteren,

Polycarbonat 1,9-Unze Schossel mat Schutz. Zuverlässeg manuell Drain. Element ass e Standard 5 Mikron. NPT vun 1/2 Zoll, 197 CFM. Entworf fir Loftversuergung fest a flësseg Verschmotzung ze läschen.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 668 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Inline Filter
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎F35341-400-VS
Item Package Quantity ‎1
Item Weight ‎1 pounds
Manufacturer ‎Ingersoll Rand
Material ‎Polycarbonate
Part Number ‎F35341-400-VS
Power Source ‎air-powered
Product Dimensions ‎8.4 x 3.6 x 3.3 inches
Size ‎1/2" NPT
Style ‎Air line Filter
Warranty Description ‎2 Year Limited Warranty

3.5

13 Review
5 Star
71
4 Star
16
3 Star
4
2 Star
3
1 Star
6

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: Spencer J
Slowly watching the water build in the filter, not in my tools
Installed with a ARO regulator & lubricator. I'll run this line for an hour or so, 90 PSI and ~3cfm average and watch all kinds of water condense onto the walls of the filter. Works well (In that my oiler isn't getting milky anymore), easy to drain, both with a spring loaded stopper on the bottom, and the ability to remove the entire drain cup. I'm not sure how well this is getting the smaller amounts of dissolved water, as a hobbyist running air tools. I'm just happy seeing water in the filter and not on the output of my tools. The IR bracket for these is way overpriced. Built my own to hold the three devices together. Each has a small indent on the side a steel shelf fit in to hold the pieces in place (see photo).
Scritto da: Ed
Quality product
Nice unit, just installed for a few days and noticed it is collecting water vapor as it should when the bleed valve is depressed. I've used larger ARO brand products in the past for water separation with excellent results, this unit is no different, just smaller. Though it is rated for 150-psi, installed downstream of the regulator and shut off valve where it will usually be at about 90-psi. Also unable to find ARO filters/parts as the standard 5-micron filter may become restrictive over time in a high-flow application, the 10-micron filter is more suitable for my application. For this unit, Ingersoll Rand's catalog lists all the replacement parts/filters but may be difficult to find and probably cost prohibitive (replacement parts/filters cost more than the unit) even though this is a popular size using 1/4" NPT fittings. I guess most just replace the entire unit when needs any servicing or they last a real long time. When that occurs, I'll install a larger unit for a minimal cost increase having readily replaceable parts/filters, higher capacity and longer run time between maintenance intervals.
Scritto da: JB
no user manual or installation manual,
Would have been nice if a user/install manual was included. How do you empty the bowl? How do you mount the unit? Detailed instructions are supposed to be available on-line at fluids.ingersollrand.com, but there is nothing available there for this model. I believe I found the mounting bracket; looks like it is ARO 104408. Would have been good if this was included or at least noted as an item that can be purchased separately.
Scritto da: S. Hammet
They work, but feel like toys
I bought this and the matching pressure gauge. These are used on my garage compressor. They weren't purchased with heavy use in mind. But I was surprised at how small and toy-like they are. They work, but I'll be replacing with something better.
Scritto da: Craig Houghton
Well designed, high quality, well built and an amazing deal!
Amazing well constructed. The body is aluminum; the bowl is polycarbonate so you can see through it yet it is strong enough to be rated at 150 psi. The bowl guard is nylon which is far superior to most plastics. The filter eliminates particles down to 5 microns. Note that the bowl capacity is only 1/2 ounce but that is adequate for a small compressor for most situations. The filter itself is very compact even for a 1/4" filter and has an extremely well thought out design and appearance. It is a bargain at Amazon's price under $20. I researched the ones available at my local Lowes, Home Depot and other stores. None compare to the quality of this one. If Amazon also sells an Ingersoll Rand 1/2" unit I now intend to buy one for my larger compressor along with another one of these. Amazing Amazon Deal!
Scritto da: Olive0909
Inlet and outlet are not interchangeable
This air dryer/filter works great, and I see significantly less water vapor through my tools. The only thing of note is that the inlet, as you face the front of the dryer, is on the left, and the outlet on the right. The way my compressor is set up (and I wanted to have this mounted on the compressor, not the wall), I had to face the front of the filter towards the compressor which makes it a little harder to empty of water. All similar products I could find seem to mostly share this directional aspect and have the inlet and outlet on the same sides as this product. Just a minor disadvantage if you are using a set up like an Ingersoll GarageMate compressor like I am.
Scritto da: Working Man
Seems like a well made part
Seems like a well made part.I like the heft of the thing. Good size bowl to collect water and easy to clear it out. I have my compressor outside so I am a little worried about the grey plastic lower section deteriorating over time. My biggest complaint is no bracket to hold the thing up. Yes you can make one but what the heck,raise the price by ten cents and give us a bent piece of steel bracket to support the thing. I would even be ok if that part was knocked out in china. Ok done with rant, buy it if you want a quality part, if you want junk buy a foreign knockoff.
Scritto da: Amazon Customer
It's an ARO filter
Nicely built, I use this ahead of a dessicant filler in a newly installed air system to pick up any debris or water in the air. My main reason to buy a name brand filter is that I've had the poly carbonate bowls crack and need to buy replacements which is hard to do with Chinese items.
Scritto da: GDN
Its a quality filter but leak down is high
I was warned and I read the other reviews of high leak down rates. I bought anyway, as its Ingersoll Rand it looks to be decent quality and how bad could it be? But the leak down.. I soaped all connections and its the plastic twist on cap. I used silicone grease on the o ring even attempted to use slightly larger o ring. In doing that using a slightly larger o ring the cup won't go on. There needs a gasket on the top lip of the reservoir cup. So I will have to live with cycle on and off more frequently for my air brush compressor. Before this Ingersoll Rand filter install, my compressor would hold pressure for days. Now its pressure drops in 20 mins or so. If there is a work around I'd like to hear about it. Maybe if it Ingersoll Rand made this filter as a screw on cup with o ring it would be a better filter.
Scritto da: NP
Good quality!
This seems like a good regulator for my new 60 gallon 2 stage compressor. I went with 3/4 shut off valve from the tank then 1/2" hardware to the filter and regulator, then to a 3/8" hose. What I don't like is how much the Ingersoll mounting bracket is "$46". It should be $5. This regulator feels very solid.
Scritto da: D.I.
Connection leak ...
The media could not be loaded. I purchased this bcuz the reviews seemed great and Ingersoll Rand has an amazing reputation for product quality and price . Unfortunately this item leaked and leaked , I had to take it apart 2 times and each time I would stack even more teflon tape . It took 3 times to get the Outlet side seal from leaking air . On second try to remove pipes they broke and I had to reconstruct new copper pipes and fitting . 12 hrs later I have no air leak , I will give it some time and will update review .
Scritto da: Amazon Customer
Not the greatest design..
As another review said, it leaks at the fittings. any tighter with thread sealant and it will break. As well, being uni directional the lock to remove the bowl on my setup it against the wall. why not move the lock to the side where it is easily accessible no matter what the set up is.
Scritto da: Vladimir
Great airline filters. Small but effective
A year ago I purchased a Campbell Hausfeld airline cleaner. It was awful. It never worked properly. I decided to put 3 of these in-line for our warehouse pad printers. They work flawlessly. They are easy to empty and take up little space. The only draw back I find is the glass inside isn't very easy to see so it's tricky to see how full the reservoir is in low light. Besides that small set back they work perfectly.

Zesummenhang Produiten

hot
Ingersoll Rand ARO F35341-400-VS Air Line Filter, 1/2 NPT - 150 psi Max Inlet, Black
3.5/5

€ 104.22

Ingersoll Rand ARO F35341-400-VS Air Line Filter, 1/2 NPT - 150 psi Max Inlet, Black
3.5/5

€ 104.22

hot
Milton 1170-2 1/2 Kompakt FRL Desiccant Dryer
4.1/5

€ 482.26

Milton 1170-2 1/2 Kompakt FRL Desiccant Dryer
4.1/5

€ 482.26

hot
WEN 3410 3-Vitesse Fernsteuerte Loftfiltratiounssystem (300/350/400 CFM), Basic w/ RF Remote (400 CFM), Black Basic w/ RF Remote (400 CFM) Air Filtration System
3.7/5

€ 328.52

WEN 3410 3-Vitesse Fernsteuerte Loftfiltratiounssystem (300/350/400 CFM), Basic w/ RF Remote (400 CFM), Black Basic w/ RF Remote (400 CFM) Air Filtration System
3.7/5

€ 328.52

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu