Motor Guard M-45-KIT 1/4 NPT Clean Air Filter Kit

Name: Motor Guard M-45-KIT 1/4 NPT Clean Air Filter Kit
Brand: Motor Guard
SKU: 012301866155
Price: 153.80 EUR
Availability: InStock

Brand:Motor Guard

3.7/5

€
153.80

Motor Guard Sub-Micronic Compressed Air Filters sinn déi ultimativ Verteidegung géint schiedlech, dreckeg Loft. Entworf fir Installatioun op de Punkt vun benotzen, dës Filtere ewechzehuelen particulates, condenséierter Fiichtegkeet zréck an Ueleg Aerosolen erof op eng onheemlech .01 Mikron an Gréisst. Keen anere Filter um Maart bitt dëse Schutzniveau kombinéiert mat engem nidderegen Drockfall an einfacher Benotzung. Produzéiert aus ongebleechtem, recycléiertem Cellulose, de Woundelement am Motor Guard-Filter fällt Verschmotzungen an absorbéiert grouss Quantitéite vu Feuchtigkeit an Ueleg. De Produkt huet e Montagehalter an Hardware fir mat 1/4 Zoll Schlauch ze benotzen. Dës Eenheet gëtt a Spraystänn montéiert, op Plasmaschneider oder op aner Ausrüstung déi ultra-propper Loft an eng flexibel Verbindung erfuerdert.

Betrag

An de Weenche leeën Kaaf elo

EAN: 012301866155

Kategorien Automotive, Ersatzdeeler, Filteren, Loftfilter & Accessoiren, Loftfilter,

Made in USA. De Wound Element am Motor Guard Filter fällt Verschmotzungen an absorbéiert grouss Quantitéite vu Feuchtigkeit an Ueleg. Maximum Drock ass 125 psi, Temperatur Beräich ass 32-175 F an den Ersatz Element ass m-723. Portgréisst ass 1/4 NPT, Nominell Loftfloss ass 45 CFM an d'Filtratiounsbewäertung ass .01 Mikron. Enthält Motor Guard Modell M-30 Filter, Montagehalter, Hardware an 2 Ersatzelementer.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Motor Guard
Color	‎Factory
Customer Reviews	4.7 4.7 out of 5 stars 128 ratings 4.7 out of 5 stars
Included Components	‎Motor Guard - Clean Air Filter Kit 1/4 Npt
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	12 x 5.5 x 10.75 inches
Item model number	‎M-45-KIT
Item Package Quantity	‎1
Item Weight	‎1.53 pounds
Manufacturer	‎Motor Guard
Material	‎Paper
Part Number	‎M-45-KIT
Power Source	‎Hand Powered
Product Dimensions	‎12 x 5.5 x 10.75 inches
Product Grade	Replacement Part
Size	‎One Size

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: D. J. M.

Works Great!

This was LOADS better than the cheap HF "Magician" 2 stage coalescent/dessicant filter it replaced. With only a compressor, aftercooler, regularor, booth filter, and gun regulator, the Magician in the booth was choking my paint gun making me crank up the line pressure to account for the pressure loss and the gun still didn't meet expectations. I was worried it was the long hose length (100ft 3/8" hose) as my paint booth is far away from the 60 gal compressor. The M-30 opened it right back up, allowing much better fan and fluid output without cranking the initial pressure up beyond 60 psi. The gun now sprays as it should with clean air, and no water! The kit is very economical with 3 filters included. Hookup was super easy & quick (10 minutes) with the bracket. If you're a DIY garage painter, this is a must-have!

Scritto da: Pat

Works very well

Works great good product for the money would buy again would recommend

Scritto da: Ronald J. Zembron

Great product

I owned one of these back in the early 80's and was constantly kidded about using a toilet paper roll for a filter. But I was painting Show Corvettes and found it to work perfectly. It's been years since I restored a Vette but I needed to do some minor body work and paint repair to a used Suburban I bought and needed a good filter system to use fro painting the panels. This filter immediately came to mind so I did some surfing and found that they still make it and have improved it since my last purchase almost 40 years ago. They now supply a great filter to use inside the unit that works extremely well. They are readily available and reasonably priced. They also eliminate the possibility of deterioration of the toilet paper roll that was possible if you didn't change the roll frequently. I only use mine with a dedicated air supply line to the filter and also a dedicated airline to the paint gun to eliminate the possibility of contamination when using air tools with oil. When using the air tools I remove the filter from the airline system by bypassing the filter and connecting my compressor after the filter system. I then connect to a oiler and dryer filter designed for such use with tools and separate air lines.

Scritto da: lr

FILTER

GREAT

Scritto da: cu

The Best Water / Moisture Trap .

I was having moisture in the compressor airline, entering my paint gun and ruining my paint job. I tried the so-called high-quality in-line water traps, but they all failed. As a true hero Motor Guard M-45-KIT 1/4 NPT Clean Air Filter Kit, solved this moisture problem. The result is clean dry air for spray painting. I have a plasma cutter so this kit will be ideal for dry h.p. air.

Scritto da: Mike Metzelfeld

Great air filter

I use this to filter air right before it enters my plasma cutter. There is an air dryer and filter up stream, I use this as the last line of defense before the plasma. This filter is a must have if you run a plasma cutter.

Scritto da: robert L

Air filter

Need to change the filter more often.

Scritto da: colormack

Great deal

Best price anywhere for a very simple but awesome air compressor filter

Scritto da: srblanch

Sturdy construction, efficient.

Sturdy construction, works great.