PEI Blat 235mmx235mm a Magnéitescht Sticker mat Klebstoff fir Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Print

Name: PEI Blat 235mmx235mm a Magnéitescht Sticker mat Klebstoff fir Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Print
Brand: UNIDO
SKU: 0783970029096
Price: 41.51 EUR
Availability: InStock

Brand:UNIDO

3.6/5

€
41.51

PRODUKTBESCHREIWUNG Rubie's Costume Company huet Qualitéitskostüm a lëschteg Kleeder fir Joerzéngte entworf. Vertrauen als Leader vu Cosplay, Halloween, an allgemeng Dekorartikelen, Rubie's offréiert d'Qualitéit net fir de Präis. Erwaart den héchsten am Kostümdesign a Material mat Rubie's. VUN DER Produzent Marvel Comics a Rubies Costume Company hu sech zesummegeschafft fir Iech an all de Kostümer an Accessoiren ze outfit déi Dir braucht fir all Är Liiblingshelden a Béiser ze verkleeden. Zënter 1951 ass Rubies de Welt Leader a Kostümer, Dekor an Accessoiren, fir feieren sécher a Spaass ze maachen. Vun Hexen a Piraten bis Vampiren an Zombien, vu Graceland bis Galaxien wäit, wäit ewech, mir wëssen datt d'Rubies 'Kostümkollektioun Iech zu enger méi grousser a besserer Halloween Saison inspiréiere wäert. Maskottchen, Locatiounsqualitéit Kostümer, Masken, Perücken, Accessoiren, Schong an all bedeitend lizenzéiert Kostüm, deen Dir wëllt droen, fannt Dir ënnert der Rubies Mark. Nach Famill Besëtz, nach Famill konzentréiert; Rubies' bréngt Iech Spaass fir all Saison, Halloween, Chrëschtdag, Mardi Gras, Ouschteren an alles dertëscht.

Betrag

An de Weenche leeën Kaaf elo

EAN: 0783970029096

Kategorien Industriell & Wëssenschaftlech, Additiv Fabrikatioun Produkter, 3D Dréckerei Ëmgeréits, 3D Dréckerei Filament,

【Wide Uwendung】 D'Gréisst vum Ender 3 PEI ass 235 * 235 mm (9.25 * 9.25 Zoll). Nodeems Dir d'Dréckbett installéiert hutt, w.e.g. nivelléieren et fir den Drockeffekt ze verbesseren. , et ass applicabel mat Creality 3D Dréckeren wéi Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro, Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 an ähnlech Gréisst FDM 3d Dréckeren.Kompatibel mat PLA/PETG/PEEK/ABS an all aner Filamenter. 【Méi bezuelbar a praktesch】 Mir benotzen 75% méi déck PEI an 25% méi déck Fréijoersstahl wéi eis führend Konkurrenten. Dëst bedeit eng méi haltbar Plack déi déi haart Konditioune vum 24/7 Dréckerei handhaben kann. Eise Magnéit kann och méi héich Temperaturen vun 120 °C erhalen, verschleißbeständeg a kratzbeständeg, einfach ze botzen: Et gëtt e Schutzfilm op der Uewerfläch vun der Kompositbeschichtung, deen anti-kratzer a staubdicht ass, etc. 【Einfach Installatioun】 D'Ender 3 V2 PEI Blat ass kombinéiert mat 2 Deeler, eng flexibel Stahlplattform texturéiert PEI Uewerfläch op enger Säit, einfach d'magnetesch Ënnerplack op Äert gehëtzt Bett hänken, da setzt d'Stolplattform mat PEI Uewerfläch op der Spëtzt. Stol, PEI Pudder op der Uewerfläch gesprëtzt, Golden Giel op de Réck. Flexibel, eraushuelbar a ka ganz gutt un d'Magnéit hänken. Héich Kraaft an Hëtzt Resistenz. 【Einfach Entfernung】 Wann se an enger 3D Drockapplikatioun benotzt gëtt, ass PEI exzellent well et déi vill Hëtztzyklen widderstoen kann, déi en 3D Dréckbett vu Drock op Dréck geet. Dës Uewerfläch ass liicht ewechgeholl a flexibel. D'Prinze kommen einfach vun der Uewerfläch aus, wann d'Temperatur vum erhëtzte Bett Raumtemperatur erreecht. Wann de Print nach ëmmer festhält, huelt déi iewescht magnetesch Uewerfläch vun der ënneschter, biegt déi flexibel Uewerfläch a kuckt wéi de Modell direkt an Är Hänn falen. 【Exzellent Adhäsioun】 Einfach op d'Dréckerei hänken ze halen, einfach d'Drécker ze läschen, flex liicht fir Ären Drock direkt ofzespëtzen. Exzellent Adhäsioun kann erreecht ginn wann d'Temperatur vum gehëtzten Bett ongeféier 60 ℃ ass, PEI Blat ouni Klebstoff oder aner Tools ze benotzen fir de Modell ze hëllefen op d'Blat ze halen.

Country of Origin	China
Item model number	PEI-1230
Manufacturer	Unido
Package Dimensions	10.87 x 10.59 x 0.83 inches; 1.12 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Cutter

Your mileage may vary

I ordered this magnetic sheet set primarily based on the claim of it being able to withstand over 100C bed temperatures, as I planned to use it on a printer used mainly for ABS and PETG. It's on an Ender Neo converted to an Ender 3 Pro by replacing the mainboard and removing the CR-touch... I get better results manually leveling and enjoy being able to use the ENTIRE 235mm bed surface (set your bed offsets if you're missing a few mm on the left and front). The magnetism is scary strong - like it'll bite you if your finger gets in the way, and once it's down it is REALLY down. (raise the extruder up out of the way and carefully align the back edge of the PEI sheet with the bed with the front raised about 30 degrees. Once the back edge and corners are aligned, slowly lower the front until it snaps into position). I have had it to 110 degrees with absolutely no apparent reduction in magnetism. The textured surface seems rock solid - more like anodized aluminum than PEI (the Gizmodorks PEI sheet on another printer feels much softer). As to the build surface, the textured side works great, albeit leaving a bottom texture reminiscent of my blue-tape-using days, but I can't get a single thing to adhere to the smooth side. The ONE time I actually got a PLA print with a 5mm brim to stick, it actually curled up at about 6mm thickness... which I have NEVER seen PLA do. I ran the bed at 65 C to get the brim to stick, and apparently the combination of insufficient adhesion and PLA softened by the bed heat (full fan, but this sheet seems to transfer heat to the model much more readily than other surfaces I've used) made it decide to curl. The textured side works great at 60 degrees for PLA, but I got ZERO adhesion on the smooth side at that temperature. Reflecting back on my learning process over the past seven years, relatively thick (over .5mm) Kapton tape was the game changer on my Prusa clones, and I got into the habit of printing PLA on a 60C heated bed (ABS at 90-95 in a 45 degree enclosure). I like the Kapton much more than PEI, but can't find any that's more than a few mils thick. The "official Creality" build surface did nothing for me, and glass - even using the specially surfaced plate that came with the Neo, has always been an exercise in futility for me. In summation, I'm debating ordering another of these, but leaning toward a similar set with both sides of the top sheet textured, or with a double-sided textured sheet and double-sided sheet with carbon fiber stripes. If I order this again at least maybe I'll know if I got one with a bad smooth-side coating.

Scritto da: teamhex

Impressive. Big upgrade over the stock PC sheets.

I come from the days of using painters tape and Kaplan tape for adhesion on glass. Glue sticks and hairspray as well. I recently got back into printing after picking up an Ender 3 S1 and a 3 Pro. Love them and my mind was blown by the flexible PC sheets that came with them. I used the stock sheets for 2-3 months and finally I’m running into issues with them. I bought this and threw it on my S1. I can’t believe how much better this is. I mean prints pop themselves off the bed when they cool. Yet when it’s hot during printing it sticks to the sheet very well. It’s a game changer and I’m considering getting a second. I have been switching between glass and PC sheets, but if this thing holds up, I’ll probably use it going forward. I feel like my first layers are better as well. Could be my imagination, but this is quite amazing. I recommend you pick one up.

Scritto da: FAT-DAD

Sticks great

The first few prints had a problem with sticking. A corner here and a corner there wouldn’t stick. Now everything sticks, but everything comes off easily when done. I haven’t had to clean it at all. This thing is great.

Scritto da: VegasHotWheeler

Nice!

Have only done a couple of print, but I like it so far.

Scritto da: Ronnie V.

Essential 3d Printer Upgrade

If you have yet to try a PEI sheet for your 3d Printer yet, you are missing out on the ease of use and end of much frustration. This PEI has a smooth side and a textured side if you want the smoothness that you can get out of your glass sheet. I highly recommend this as an essential printer upgrade, you will not regret it, and no more scraping and fudging to get your prints off the bed. This installs in seconds, and only requires a quick relevel. One bonus of this sheet is the dual tabs making it easy to lift off from either side of the bed. Again highly recommend this for your Ender3v2 not sure why I waiting so long.

Scritto da: spadic

Works great!

Had to cut slots for my exposed screws on my 5 S1 bed but it is the correct size. Couldn’t find just the metal plate! My 5 S1 already has a magnetic base.

Scritto da: Shane

Product works great, prints stick during the print and come off easily when cooled

The will fit multiple printers as long as the bed size is 235x235. I tested on a Fookos Odin F5 and it fit perfect. Reversable, with both textured and smooth. I was a bit worried about the smooth side as it doesn't appear to have a PEI sheet, unless it's incredibly thin. However after printing on it, it works great I was surprised how well the print stuck to the smooth side of the bed, with the bed still warm I had to use a bit of force to remove the print, which says to me it wasn't going anywhere. Personal preference for most on the smooth vs textured. Personally either one works for me, both side worked well, and function as expected. I did include a picture to show the texture vs smooth bottom finish The included magnet sheet is very strong, grabs the print surface very firmly.

Scritto da: Killerdave

Works great and at good price.

I love this sheet it sticks very well. It's better then the glass I had.