0
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister
0

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen
LoginRegister

Quicksilver 822777Q1 Aluminium Trim Tab Anode fir Mercury oder Mariner Outboards a MerCruiser Stern Drives mat héije Rake Propeller, Onspezifizéierten

Brand:‎Quicksilver

3.5/5

€
56.39

Fir Applikatiounen wou extra Spillraum fir héich-Rake Propeller néideg ass. Passt op déi meescht Mercury/Mariner Outboards 35 PS a méi, 1995 a méi nei Force 90 PS an 120 PS Outboards plus all MerCruiser Drives. Schützt Ären Aussen- an Heckfahrt virun de schiedlechen Effekter vun der galvanescher Korrosioun wärend Dir d'Lenkkontroll hëlleft. Inspektéieren jäerlech an einfach ze ersetzen mat Hardware abegraff mat der Anode. D'Quicksilver Mark ass de Leader fir kompromisslos Motoröle, Deeler an Accessoiren fir d'Marineindustrie fir iwwer 65 Joer ze liwweren. Quicksilver ass de Premier Zouliwwerer vu Mercury Marine Original Equipment Ersatzmotordeeler, Ueleger an Accessoiren, awer schafft och fir all Original Equipment Marken an der Marine- a Powersportsindustrie ze déngen. Et huet eng trei Follower verdéngt andeems se déi héchst Qualitéitsprodukter ubidden, déi duerch e puer vun de strengsten Ëmfeld an Testprozeduren getest ginn. Nee aftermarket Firma kënnt no op den Niveau vun Fuerschung an Design wéi Quicksilver; kafen Quicksilver ass Kaf Leeschtung, Schutz a Fridden vum Geescht.

Betrag
An de Weenche leeënKaaf elo

EAN: 0745061464667

Kategorien Sport & Outdoor, Sport & Fitness, Boot & Segelen, Schëffer & Ausrüstung, Boot Motor Deeler, Propeller,

Produzéiert fir Mercury Marine Originalausrüstung Hiersteller Spezifikatioune ze treffen fir Äre Mercury Mariner oder Force Outboard am beschten ze schützen. Dës Aluminiumguss Anoden treffen oder iwwerschreiden de Mil-Spec MIL-A-24779(SH) suerge méi laang dauerhafte Schutz wéi Zinkanode a si fir ze benotzen a frësch oder Salzwaasser. Kontrolléiert d'Anoden periodesch fir de beschte Schutz a ersetzt wann Dir Zeeche vu Korrosioun oder Pitting gesäit fir Är Ënnerhaltskäschte erof ze halen. All Anode ass entworf fir séier an einfach Ersatz mat gemeinsamen Tools ze erënneren fir d'Propeller Clearance virun der Operatioun ze kontrolléieren. Fir Applikatiounen wou extra Spillraum fir héich-Rake Propeller néideg ass. Passt op déi meescht Mercury/Mariner Outboards 35 PS a méi, 1995 a méi nei Force 90 PS an 120 PS Outboards plus all MerCruiser Drives. Hëlleft d'Gearkëschthaus vu Korrosioun ze schützen, well et hydrodynamesch Trimmkraaft fir Ären Aussenboard an Heckfuerer ubitt fir d'Lenkung ze hëllefen.
Brand Name ‎Quicksilver
Color ‎Unspecified
Country of Origin ‎Venezuela
Customer Reviews 4.5 4.5 out of 5 stars 438 ratings 4.5 out of 5 stars
Fishing Technique ‎Spinning, Casting
Included Components ‎Anode
Item Dimensions LxWxH ‎7.75 x 6.67 x 4 inches
Item Package Dimensions L x W x H ‎6.8 x 5.8 x 3.3 inches
Manufacturer ‎Quicksilver
Material ‎Various Materials
Model Name ‎822777Q1 Aluminum Trim Tab Anode - Mercury or Mariner Outboards and MerCruiser Stern Drives Using High Rake Propellers
Number of Items ‎1
Package Weight ‎0.36 Kilograms
Part Number ‎822777Q1
Size ‎Unspecified
Suggested Users ‎Boat Engine Parts and Accessories

3.5

13 Review
5 Star
74
4 Star
12
3 Star
6
2 Star
2
1 Star
7

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat*

Scritto da: jim
Its beuatiful
Scritto da: wyatt
Finally I found it somewhere
I dont know why but I was unable to find this at my local marine store. Glad I was able to find it online. I needed a trim tab anode that was both set back (for prop clearance) and full length (for added stability) and this item fit the bill! I tried using a flat anode but had too much torque steer, I tried using a set back trim anode but it didnt have enough material to combat the torque steer. This product was the answer, both set back and full size. Installed on my Mercruiser Alpha 1 Gen 2 outdrive. It came with the bolt with thread locker already on it. Only problem is that it only comes in aluminum so I had to swap out the rest of my anodes from zinc to aluminum.
Scritto da: Alan Bailey
Nice
Exactly what I ordered, exactly what I needed. Very high quality.
Scritto da: SG
Quicksilver for the win once again.
Excellent purchase! Looks better quality than OEM. This was fitted to a 1998 Mercury V6 150 and only modification I had to do was grind off a little material for clearance of my rear bolt through my housing which is mainly due to the reason that I run a lower unit extension plate because I swap out prop and jet pump from summer to winter times. Same day shipping was available and would buy again.
Scritto da: John
Well made
Like most things from quicksilver this is another quality product
Scritto da: Ron
Easy to install and if you have a slow speed wander on your runabout, this helps a lot!
We have a 2050 Sea Ray bow rider that really likes to wander at slow speeds. Irritating when in channels with lots of boats or at multiple launch ramps. We went from a 3 blade to a 4 blade and that helped along with this skeg. The original trim tab was flat, no fin, so this helped. We haven't tried off setting it yet, it seems to me on our other boats they were always offset instead of straight out the back. Time will tell as I fool around with it.
Scritto da: Stephen G Cox
Had a flat anode and switched to this to improve slow speed prop walk.
My sterndrive bowrider has the absolute worst slowspeed prop walk. Its a struggle to point straight in a no wake zone. This season, I went after the problem... I replaced the 21 pitch SS 3 blade prop with an alum 21 ptch 4 blade prop and put this finned anode on the sterndrive in place of the stock flat one. PROBLEM SOLVED! It was a combination of replacing both the anode and the prop that addressed the issue to a satisfactory level. The 4 blade prop required this offset fin anode. All sterndrives walk at no wake speeds, but now its manageable.
Scritto da: David Walker
Did exactly what it was supposed to do. Had ...
Did exactly what it was supposed to do. Had purchased a new prop, that, while it was the listed size for my boat, it hit the old trim tab. In further reading the directions, there was a note on mercury outboards, that if the prop hit the trim tab, buy this one. I did, it worked, what more can be said about an anode? Fit my '83 Merc 80hp. Likely fits several other years as well
Scritto da: roscoe
Alpha 1
1990 alpha 1 leg fit good
Scritto da: Amazon Customer
fin
great product
Scritto da: Shawn
Exactly what i was expecting
Fit my Alpha 1 leg and made room for the 4 blade prop
Scritto da: andre
bien
parfait pour corriger
Scritto da: Dan
????
Exactly as expected, fast shipping

Zesummenhang Produiten

hot
SOLAS 3451-139-17 HR Titan 3 Edelstol 3-Blade Propeller - RH, 13-7/8 Duerchmiesser x 17 Pitch
2.6/5

€ 602.17

SOLAS 3451-139-17 HR Titan 3 Edelstol 3-Blade Propeller - RH, 13-7/8 Duerchmiesser x 17 Pitch
2.6/5

€ 602.17

hot
Quicksilver 8M0104229 Waasserpompel Reparatur Kit fir V-6 a V-8 ugedriwwen MerCruiser Stern Drives
3.7/5

€ 85.27

Quicksilver 8M0104229 Waasserpompel Reparatur Kit fir V-6 a V-8 ugedriwwen MerCruiser Stern Drives
3.7/5

€ 85.27

hot
Turning Point Propeller 31501532 Express 4-Blade Edelstahl Propeller fir 90-300+ HP Motoren mat 4.75 Gearcase - 15 x 15, Recht Hand Propeller EX-1515-4
3.4/5

€ 811.33

Turning Point Propeller 31501532 Express 4-Blade Edelstahl Propeller fir 90-300+ HP Motoren mat 4.75 Gearcase - 15 x 15, Recht Hand Propeller EX-1515-4
3.4/5

€ 811.33

hot
Quicksilver Nemesis 4-Blade Aluminium Propeller - Fir Mercury a MerCruiser Motoren 90 CT - 300 HP Mercury / MerCruiser 14 Dia. X 19 Pitch - 8m0055535
3.7/5

€ 268.34

Quicksilver Nemesis 4-Blade Aluminium Propeller - Fir Mercury a MerCruiser Motoren 90 CT - 300 HP Mercury / MerCruiser 14 Dia. X 19 Pitch - 8m0055535
3.7/5

€ 268.34

hot
SOLAS SK-CD-13/18 Concord 3-Blade Impeller fir Limitéiert / Modifizéiert Sea-Doo Spark Ace 900 an 900 HO TRIXX (2014-), Schwaarz
3.1/5

€ 415.11

SOLAS SK-CD-13/18 Concord 3-Blade Impeller fir Limitéiert / Modifizéiert Sea-Doo Spark Ace 900 an 900 HO TRIXX (2014-), Schwaarz
3.1/5

€ 415.11

hot
Turning Point Propeller 31431930 Edelstol Express 4 Blade Propeller mat 4-1/4 Gear Case (40-150 PS EX1/EX2-1319-4)
3.2/5

€ 647.30

Turning Point Propeller 31431930 Edelstol Express 4 Blade Propeller mat 4-1/4 Gear Case (40-150 PS EX1/EX2-1319-4)
3.2/5

€ 647.30

hot
Turning Point Propeller 31431730 Edelstol Express Rechter Hand 4 Blade Propeller mat 4-1/4 Gear Case (13,25 x 17)
3.6/5

€ 626.89

Turning Point Propeller 31431730 Edelstol Express Rechter Hand 4 Blade Propeller mat 4-1/4 Gear Case (13,25 x 17)
3.6/5

€ 626.89

hot
Turning Point Propeller 31501512 Prop Express 14.5X15 3Bl Rh Ex-1415 Edelstahl
4.1/5

€ 630.28

Turning Point Propeller 31501512 Prop Express 14.5X15 3Bl Rh Ex-1415 Edelstahl
4.1/5

€ 630.28

Entdeckt eisen internationale Netzwierk

Mir schécken an 28 Länner, iwwer 200.000 Produkter. Bleift aktualiséiert, abonnéiert Iech op den Newsletter.

Array

Ganzen:€ 0.00

Kuckt de WeenchenOfmellen

Kategorien

All d'Kategorien
Menu Kategorien Noper Weenchen

Menu