Wanter 2 Zoll Dial Gréisst, Multi Funktioun Economie Utility Trocken Drock Gauge, Messing Internals, Black Steel Case, Dual Skala 0-100 psi/kPa, 3-2-3% Genauegkeet, 1/4 Zoll NPT Bottom Mount, Pressure Gauge 0/ 100 PSI/KPA

Name: Wanter 2 Zoll Dial Gréisst, Multi Funktioun Economie Utility Trocken Drock Gauge, Messing Internals, Black Steel Case, Dual Skala 0-100 psi/kPa, 3-2-3% Genauegkeet, 1/4 Zoll NPT Bottom Mount, Pressure Gauge 0/ 100 PSI/KPA
Brand: Winters Instruments
SKU: 0628311200454
Price: 33.08 EUR
Availability: InStock

Brand:Winters Instruments

3.6/5

€
33.08

PRODUITDETAILER: Variatioun: PEM Economy Pressure Gauge. Dial Gréisst: 2 (50mm.) Dimensioun: 3 x 2 x 1,2 Zoll. Genauegkeet: +/- 3-2-3%. Material: Bronze a Messing. Fall: Stol gemoolt Black. Fir Net-clogging an Net-corroding Medien. ACCURATE RESULTAT: Seng Affichagegenauegkeet ass + oder - 3/2/3% iwwer de ganze Spektrum vun der Jauge (ASME B40.100 Grad B) & huet eng 1/4 Zoll NPT männlech Verbindung am ënneschten Mount. Perfekt fit ouni Leckage an ass einfach ze liesen. STURDY & IP52 ZERTIFIED: Dës kreesfërmeg Dial ass an engem Stahlkëscht fir Ëmweltschutz zougemaach an ass IP52 zertifizéiert fir Schutz géint Stëbs oder Flëssegkeeten. Dësen Drockmeter ass gebaut fir ze daueren, sou datt Dir drop ziele kënnt wann den Drock eropgeet. DUAL SCALE GAUGE: Dësen Drockmeter huet eng Dual-Skala Jauge 0-15 psi / kPa a kann iwwerall am Circuit installéiert ginn fir den Drock zu all Punkt einfach ze moossen. Mat enger Acryllens fir maximal Kloerheet, déi zu all Moment präzis a kloer Liesungen ubitt. DRËCHT Drockmeter: Vergewëssert Iech datt Är Maschinn op Héichleistung funktionnéiert! Dësen Drockmeter ass aus Messing befeuchtte Deeler gemaach fir net-korrosive Flëssegkeets- a Gasdrock ze moossen. Super fir HVAC, pneumatesch, hydraulesch Systemer, Loftkompressoren a méi.

Keng Unitéiten verfügbar

EAN: 0628311200454

Kategorien Industriell & Wëssenschaftlech, Test, Mooss & Inspektéieren, Drock & Vakuum, Drock & Vakuum Gauges, Drockmeter,

Brand	Winters Instruments
Country of Origin	China
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	PEM202
Item Weight	0.22 Pounds
Manufacturer	Winters
Material	Steel
Package Dimensions	3.5 x 2.48 x 1.46 inches; 3.52 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Schreift Är Bewäertung

Är E-Mail gëtt net publizéiert. All obligatoresch Felder sinn markéiert mat^*

Är Bewäertung

Scritto da: Amazon Customer

Gauges

Arrived on time, works as expected.

Scritto da: Amazon Customer

Works great

Works great and is of good quality.

Scritto da: Frederick Ward

Seems to work well

Useful to my needs

Scritto da: vicki wysong

great buy

great buy

Scritto da: FlyboyTR

First One Defective...Replacement Is Perfect

When my first one arrived, it was showing 7 PSI out of the box. I did not even connect it. I contacted Amazon for a replacement. This is being used in an assembly that allows me to air up/down two tires at a time. We do off-roading and the ability to air up/down two tires at a time is a good thing. It also allows me to balance the pressure between the two tires. I also have the ability to check the line pressure with a regular tire gauge (just a back up). I have one electronic and two manual tire gauges that I use. All three of these read exactly the same at 40-65 PSI. The replacement gauge arrived two days later. It was at 0 PSI out of the box. I installed it and started checking...thinking a gauge at this price point would be way off. Actually what I found after testing it with my three tire gauges was impressive. At 40 PSI and below it reads about 1 PSI low. At 50-65 it reads exact to about 1/2 PSI high. I have used high-end, expensive, oil filled gauges that were no where this accurate. Bottom line...I am very pleased with the replacement and glad that I decided to stay with the same brand/seller, etc. Thanks!

Scritto da: HappyDayze

For pressure readings it works very well.

Easy to read. No vibration of needle... Very accurate!

Scritto da: Albatross

It's good value for the money

I purchased three gauges to install on a water filtration system. After about a month, one failed. The failure was related to the needle "sticking" rather than a smooth movement during operation. I emailed the company directly, who informed me to go through Amazon for returns/rrplacement/warranty. I don't know what that says about the company, but I guess they don't want to deal with customers directly. Either way it's easy to install, the accuracy is about +/- 5% from what I can measure. The two working ones are smooth and easy to read. One part that I'm not too happy with is the two screws in the back are not stainless steel nor are they protected. So one of them somehow had water splashed in the and the screws are show rust after a month of usage. Didn't expect water tight Gauge, but also didn't expext rust from Gauge that is designed to measure water pressure as well.

Scritto da: Shane

Ehh

Might have just got a bad gauge. It was not reading correct pressure. Other than that it seems like a nice gauge. Simple and easy to use. If only mine had worked as intended.