CURT 11174 Attelage de remorque Classe 1, récepteur 1-1/4", compatible avec certains véhicules BMW

Brand:CURT

3.2/5

€
726.55

TESTÉ POUR LA SÉCURITÉ. Chaque conception d'attelage de remorque CURT de classe 1 est soigneusement testée, en utilisant de vrais véhicules dans des conditions réelles. Nos attelages sont testés selon les spécifications SAE J684 pour la sécurité sur la route. INSTALLATION FACILE. Cet attelage de classe 1 est conçu pour s'adapter en usine à certaines années modèles des BMW 323Ci, 323i, 323is, 325Ci, 325i, 325xi, 328Ci, 328i, 328is, 330Ci, 330i et 330xi. FINITION DOUBLE COUCHE. Pour une résistance à la rouille, aux éclats et aux UV à la pointe de l'industrie à l'intérieur et à l'extérieur, ce kit d'attelage de remorquage de rechange est immergé dans une couche A liquide et co-durci avec une finition en poudre noire durable. TRÈS POLYVALENT. Ajoutez des options de remorquage utiles et polyvalentes à votre véhicule avec cet attelage de remorque de classe 1. Il fournit un attelage récepteur standard de 1 1/4 po x 1 1/4 po, vous permettant de tracter une petite remorque ou de monter un porte-bagages ou un porte-vélos. FORCE FIABLE. Avec une construction en acier solide et soudé, cet attelage de classe 1 est évalué pour 2 000 lb. poids brut de la remorque et 200 lb. poids au timon (limité au composant de remorquage le moins bien noté).

Montant

Ajouter au panier Acheter maintenant

EAN: 0612314010875

Catégories Automobile, Accessoires extérieurs, Produits de remorquage et treuils, Accrochements, Attache à barre de traction,

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.1 4.1 out of 5 stars 19 ratings 4.1 out of 5 stars
Exterior	‎GLOSS BLACK POWDER COAT
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎11174
Item Weight	20.15 Pounds
Item Weight	‎20.2 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎11174
Material	Carbon Steel
Model	‎Class 1 Hitch
OEM Part Number	‎11174
Product Dimensions	‎15 x 44 x 7 inches
Vehicle Service Type	Off-Road-Motorcycles, Car, Sport-Utility-Vehicles, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: rather fix than buy new

Installed, fairly robust for a Class 1 on a BMW sedan

It took roughly 8 total hours to install. I wasn't able to use any ramps etc to jack my 2002 325i sedan up to get more room for all that equipment was 100 miles away at my cabin - but I still was able to complete the job. I took it slow and easy, not wanting to make any mistakes. Measure thrice, drill once. And I definitely used sealant on every drilled hole to ensure no water etc gets into the spare wheel well. It was not a perfect fit though with one respect. The two straps used to anchor the back 4 bolts were roughly a 1/2 to 3/4 an inch too long at one end. I used a grinder and hand saw to take a bit off the end, round off the cuts etc. Then because of the curvature of the well, I used 3 stainless steel washers under each strap at the cut end to raise the straps away from the curve of the well. Otherwise, everything else fit perfect. I will update this review once I begin towing something with it. I will be launching a roughly 1500 lb flat bottom fishing boat/trailer with it (yikes) but only have to tow it about 4 miles round trip - a temporary arrangement because my SUV died on me and I haven't found a replacement yet. Once I find a true towing vehicle, this hitch will be used for a bike rack as well as a small metal basket for light hauling outside the vehicle. In the future I may rig up a couple backing plates underneath the well to reinforce the hitch.

Scritto da: harpz

Installed it in an hour and works fine. -Installation manual does not say which drill bit ...

Received it in 3 business days. Installed it in an hour and works fine. -Installation manual does not say which drill bit size to use, i used 7/16" drill bit.

Scritto da: Adam

I got my bike rack on my E46 BMW

Highly recommend. Wasn't too hard to install. Great value for money with this purchase. Took a couple hours to install, most of it was measuring and marking the correct spots to drill

Scritto da: Amazon Customer

Great Seller! Product arrived early, in excellent condition, and as described! Thank you!

Great Seller! Product arrived early, in excellent condition, and as described! My mechanic installed in less than an hour. Will use for bike rack. Thank you!

Scritto da: T. Jones

Great comparative value

The Curt Hitch has proven to be very sturdy. I've used it to tote my bike about 4-5 times a week for the past several months, and I've had no issues with it. I also had no trouble installing it myself, though I'm not one to work on my car much.

Scritto da: Jorge

Four Stars

Great fit for my car

Scritto da: K and A Sawyer

Exactly what I needed

I needed a hitch on my BMW E46 sedan to hold a heavy-duty bike rack. Drilled the 8 holes into the spare tire compartment and it holds everything and doesn't budge. I don't think I would tow anything with it since it is not attached to the frame though.

Scritto da: b.gunn

but not terrible.

Works for my 2000 323ci for a bike rack. Could be a little lower profile, but not terrible.

Scritto da: Bev Funk

Sturdy hitch

Seems to be well built and sturdy. It did take longer to install than the suggested 45 minutes but otherwise installation went well.

Scritto da: Terry R.

Price drop not passed on to consumer.

Advertised with pin and clip included but didn’t receive those two items. Price dropped by $90.00 three days after I purchased it, but disappointed that Amazon would not give me a rebate even though Amazon was the seller. The hitch itself is great!