Curt Manufacturing 55571 Faisceau de câblage de remorque 4 broches côté véhicule, compatible avec certains Nissan Murano, Noir

Brand:Curt Manufacturing

3.7/5

125.39

Si votre véhicule n'est pas équipé de câblage pour tracter une remorque, le câblage sur mesure CURT est la solution idéale. Un faisceau de câbles personnalisé - également appelé connecteur en T - est un appareil électrique simple et prêt à l'emploi qui se branche sur votre système électrique automobile et fournit une connexion de câblage de remorque standard et universelle. Cela se fait à l'aide de deux ou plusieurs connecteurs compatibles OEM spécifiques au véhicule à brancher sur l'ensemble de feu arrière, éliminant ainsi le besoin de couper, d'épisser et de souder pendant l'installation. Les faisceaux de câbles personnalisés sont spécifiques au véhicule et, bien qu'ils ne soient pas disponibles pour tous les véhicules, ils offrent l'un des moyens les plus rapides, les plus simples et les plus sûrs de câbler un véhicule pour le remorquage. Ce faisceau enfichable particulier fournit une prise de connecteur plat à 4 voies et est conçu pour être un faisceau de câblage personnalisé pour s'adapter à certaines années du Nissan Murano (pour vérifier la compatibilité de votre véhicule, voir les informations d'application). Il est livré avec tous les composants de câblage nécessaires pour établir une connexion de câblage de remorque fiable, ainsi qu'un cache anti-poussière pour garder le connecteur propre lorsqu'il n'est pas utilisé. Vous avez une image en tête de votre prochaine destination - peut-être est-ce le débarquement du bateau sur votre lieu de pêche préféré, peut-être est-ce un camping qui surplombe l'un des chefs-d'œuvre de la nature, ou peut-être est-ce le prochain grand chantier. Cependant, transformer cette image en réalité demande plus qu'une simple rêverie. Il faut une connexion solide et la bonne quantité de puissance. Le câblage personnalisé CURT est fabriqué avec certaines des technologies les plus sophistiquées de l'industrie et est conçu pour être installé facilement, vous offrant une connexion électrique durable pour votre configuration d'attelage de remorquage.

HOUSSE DE PROTECTION. Pour favoriser une utilisation durable et une résistance aux intempéries, ce faisceau de câbles d'éclairage de remorque à 4 pôles est livré avec un cache anti-poussière en caoutchouc. Il s'adapte facilement sur le connecteur plat 4 voies lorsqu'il n'est pas utilisé, le protégeant ainsi des éléments extérieurs. PUISSANCE FIABLE. Ce faisceau de câblage de remorque à 4 voies est construit avec la technologie de montage en surface. Ce type de circuit génère moins de chaleur, une intensité lumineuse optimale et des performances durables. SPÉCIFIQUE AU VÉHICULE. Ce faisceau de câblage de remorque de véhicule de rechange est conçu pour certaines années du Nissan Murano. CONNECTEUR STANDARD. Ce câblage de remorque enfichable à 4 plats peut être utilisé pour connecter les feux arrière de la remorque, les feux de freinage et les clignotants. Le câblage d'éclairage de remorque à 4 voies est populaire sur une variété de remorques, ajoutant des options de remorquage polyvalentes pour votre véhicule. FACILE À INSTALLER. Pas de découpe ! Pas d'épissure ! Ce kit de faisceau de câbles de remorque se branche sur le câblage d'usine existant de votre véhicule et l'équipe d'un connecteur de câblage de remorque arrière standard à 4 broches pour brancher et tracter une remorque.
Brand ‎Curt Manufacturing
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 181 ratings 4.6 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎55571
Item Weight ‎12.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55571
Model ‎Custom Wiring
OEM Part Number ‎55571
Product Dimensions ‎9 x 4 x 3 inches

3.7

13 Review
5 Star
78
4 Star
15
3 Star
4
2 Star
0
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Art in VT
Hooked up with no problems
Relatively easy install given the number of clips/nuts and panels that need to be removed to gain access to the wiring harness that it plugs into on each side. I didn't pay close enough attention to the details to note that it is a 4 pin connector, so does not have a connection for reverse lights (which I have on the back of my trailers hitch mounted rack). I'm hoping I can find the line to the backup lights for the needed fifth pin connection since the lights themselves are both mounted in the hatch lid. Once I find that I'll tag into it for a relay signal to turn on the trailer mounted lights with power directly from a fused line to the battery.
Scritto da: Maria
Very easy to install
It’s just as it stated , it was very easy to install
Scritto da: Amazon Customer
Perfect fit
Figment spot on
Scritto da: Wackadoo
Easy Install and Works Great!
When I first bought my 2011 Nissan Murano, I knew immediately that I needed a hitch, and really wanted a wiring harness with it as well so I could tow our pop-up camper for short/nearby camping trips. Problem was, Nissan wanted almost $600 to install a "factory" hitch and wiring harness. So, I immediately bought a "hidden hitch" for $115 and installed it with ease, but did not add the harness until recently because I didn't want to have to run a wire under the car from the back to the battery. The Curt T-Connector solves the wire-to-the-battery problem and installs with ease. I'm not exactly Johnny Fix It, so I just took my time, watched a youtube vid on how to do the install and followed along with the supplied instructions. Installation took about 1.5 hours total (again, I took my time because I didn't want to break a clip or scratch the interior or exterior of the car). Mission accomplished - everything went perfectly. I hooked up our pop-up camper today and brought it home - all lights worked perfectly, and the 10 amp fuse had no problems at all. So, for around $175, I was able to install a system that's "almost" as good as the factory version. I say "almost" because the factory wiring harness is attached to the hitch, but the Curt rests inside your spare tire compartment and hangs out the back of the car when being used. That's the only knock I have on the product, but it's something I can live with since I won't be using it all of the time. Great product, easy install, works as advertised, and saves a ton of money vs. a factory install. Highly recommend.
Scritto da: Lauren
Could not have been easier to install!
Anyone can install this wire set! Super fast delivery, high quality!
Scritto da: Steve R
As expected
Instillation instructions were a little vague and hard to understand. However, the install is very simply plug and play. No wire splicing easy install.
Scritto da: Midweste
Highly recommend this t-Connector - Exact fit and integration with OEM wiring!!
Ordered this T-Connector harness for my 03 Nissan Murano and it worked perfectly. The excellent instructions guided me through each step of the installation and were dead on accurate for my vehicle. This unit has the exact OEM Nissan connectors that snap in place tight and secure. Install time was around 20 minutes... There is also a step by step installation guide video on the Tube for those that need more visual instruction. Plugged in my trailer lights and all is good! The matching CURT 13571 Class III Receiver from Amazon is arriving tomorrow... Dealer wanted north of $500 for the parts and installation / Amazon price for both parts $175 with free 2-day Prime shipping!! NOTE: The T-Connector that is pictured shows rubber tubing with a grommet installed on the trailer wiring. This is not on the revised and updated unit I received. It is kind of overkill since the 4 prong plug is protected at the connection and comes with a weather boot. Very satisfied with my purchase
Scritto da: Ben
Easy to install
I agree with another user that it doesn't arrive as pictured. There is no grommet and tubing. However, per the instructions the connecter is supposed to be run under the tailgate or hatch when in use. That being said you don't these parts if you use it according to manufactures guidelines. I have a 2012 Nissan Murano and the installation was a breeze. It took about 15 mins for me to install and was extremely easy. The only thing that bothered me and reason for getting 4 stars in that it came with the wrong fuse. They supply a 10amp mini fuse and the vehicle uses a low profile. I went to the local parts store and purchased the correct fuse. Not a huge deal but it would have been nice to have the correct part.
Scritto da: C. Hildebrandt
Easy plug and play
I am happy with the product in general, nice that its a direct clip in unit. The instructions were good but I had to remove extra panels and do alot of "work by feel" due to no vision and short factory harness wires. Once installed and wires cleaned up everything went back together as it should and lights worked. There are full how to install video's available on Google with a quick search.
Scritto da: Amazon Customer
Very happy about the no cutting/splicing of wires
Very happy about the no cutting/splicing of wires. Everything connected very well. Would buy another kit from Curt. Took about 1.5 hrs start to finish with a few beverages in between.
Scritto da: Daniel Beattie
So easy to install
I loved how easy this was to install,,,Didn't like the price,,,but hey,,,in the long run,,,it was worth it
Scritto da: Will
Highly recommend this product
Product as described with quick and easy install.
Scritto da: Jerry Mugridge
Simple install
Vehicle specific light adapter, fit & works perfect. Instructions good but also U-Tube videos make install easy.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array