GE Lighting CYNC Détecteur de mouvement intelligent sans fil, programmable, Bluetooth, détection de la lumière ambiante, alimenté par batterie

Name: GE Lighting CYNC Détecteur de mouvement intelligent sans fil, programmable, Bluetooth, détection de la lumière ambiante, alimenté par batterie
Brand: GE Lighting
SKU: 0043168503341
Price: 49.36 EUR
Availability: InStock

Brand:GE Lighting

2.8/5

€
49.36

Couverture de mouvement étendue : Avec plusieurs options de positionnement, il est facile d'obtenir une lumière activée par le mouvement partout dans votre maison. La tête pivotante du détecteur de mouvement et la couverture de 105 degrés détectent des zones jusqu'à 20 pieds. Éteignez automatiquement les appareils : connectez ce capteur de mouvement intelligent à une prise intelligente Cync ou C by GE dans l'application Cync, et le capteur de mouvement éteindra automatiquement les appareils comme les fers plats ou les radiateurs d'appoint si personne n'est dans la pièce. Économisez de l'argent et de l'énergie : les lumières peuvent être éteintes après 5 minutes si aucun mouvement n'est détecté par le détecteur de mouvement. La détection de la lumière ambiante empêche les lumières de s'allumer lorsque la lumière naturelle remplit la pièce. Détecteur de mouvement programmable : programmez votre détecteur de mouvement sans fil pour qu'il se désactive à certaines heures ou allumez doucement les ampoules la nuit. Faites en sorte que n'importe quelle pièce de votre maison ait une lumière activée par le mouvement. Batterie remplaçable conçue pour durer plus de deux ans. Lumières du détecteur de mouvement : le détecteur de mouvement alimenté par batterie déclenche les ampoules intelligentes Cync et C by GE, les prises intelligentes et les interrupteurs intelligents pour s'allumer lorsque quelqu'un entre dans la pièce. Placez le détecteur de mouvement sur une étagère ou une table, ou fixez-le avec les supports inclus.

Montant

Ajouter au panier Acheter maintenant

EAN: 0043168503341

Catégories Outils et amélioration de la maison, Électricité, Interrupteurs et gradateurs, Interrupteurs muraux, Interrupteurs activés par le mouvement,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	GE Lighting
Brand	‎GE Lighting
Color	White
Color	‎White
Customer Reviews	3.8 3.8 out of 5 stars 382 ratings 3.8 out of 5 stars
Included Components	‎One
Item model number	‎CWLMSONNWW1/ST1P
Item Package Quantity	‎1
Item Weight	0.1 Pounds
Item Weight	‎0.1 Pounds
Item Weight	‎1.6 ounces
Manufacturer	‎GE
Material	‎Plastic
Maximum Range	20 Feet
Maximum Range	‎20 Feet
Mounting Type	‎Wall Mount
Part Number	‎CWLMSONNWW1/ST1P
Power Source	Battery Powered
Power Source	‎Battery Powered
Product Dimensions	‎3.11"D x 4.92"W x 8.23"H
Product Dimensions	‎8.23 x 3.11 x 4.92 inches
Recommended Uses For Product	‎Indoor
Shape	‎Oval
Special Features	‎Motion Sensor
Style	‎Wire-free Smart Motion Sensor

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Reoy

Pro Tips

Tip 1: To remove the battery cover, you need to unscrew it carefully. Use a lot of pressure on the screw head to avoid stripping it. The factory tightened the screw too much, so there's a 50/50 chance of removing it without causing damage. If you can't remove it, return the device, as you won't be able to change batteries. Tip 2: If you're connecting this Motion Sensor to their Smart Plug, keep in mind that the Smart Plug's stay-on time can't be adjusted. When the motion sensor is triggered, the Smart Plug will stay on for five minutes before turning off. This five-minute interval can't be changed in the current version of the iOS app (v6.11.0 build 14256), as well as in the Smart Plug (v1.0.298) and Motion Sensor (v1.3).

Scritto da: C. M. Grove

Follow these steps

During set up we encountered problems having the motion detector function with Cync smart bulbs. Tech Support sent these instructions which solved the problem, when followed EXACTLY as written. Open the Cync app and delele both the Motion sensor and bulbs from your current Home. Delete the Home. Close and restart the app. Place paper clip end in the motion sensor pinhole for three seconds to reset the device. Create a new Home. Add a bulb into your new home. Do not create a group or room for it. When prompted, perform any required firmware update. Add the motion sensor into a new room. When prompted, perform the required firmware updates, Tap done. Set the motion sensor settings to your preference and be sure to disable the ambient light settings feature. Move the Bulb over to the same room as the motion sensor. This process only works if all devices are running current firmware. Good luck!

Scritto da: Eric Sickels

Wouldn’t connect

I’ve had 50/50 luck on getting these to connect and work correctly. Lots of trial and error and I’ve had to return 2 due to failing to ever connect. When they do connect, they work well.

Scritto da: Matt R.

Wish i bought more when it was less expensive.

Use this in the garage, it has made a world of difference now that when i pull into the garage the lights turn on right away. I should have gotten 2 that way all of the garage is covered. But in general its amazing!

Scritto da: Pedro

Works, but it's a bit limited.

Hopefully as Cync evolves they will add a bit more functionality. Can only control a single group. You can set the timeouts. Color and brightness can be set differently for 4 time blocks which is the hard limit. Time blocks must be the same every day of the week. Color and brightness can NOT be set by sunrise/sunset, temperature, or weather. Cync obviously does not play nice with any other systems, but additionally the motion sensor can't send info back to Alexa, Google, or HomeKit.

Scritto da: J Frank

Needs to be Updated!

I couldn’t get the sensor to work correctly until I performed a firmware update. Now the product works as expected. The motion detection range is a bit sensitive even on the lowest setting. The device is small and easy to hide.

Scritto da: Toyreon

Works well but not without a few issues.....

I have had c by ge light bulbs for about a year now and used Alexa and sometimes Google to control them, however I got tired of always shouting commands to turn on the lights especially since I don't have an Alexa in every room. So I thought this would perfect since it is motion detected instead of voice. However my initial setup was a nightmare. I had my bulbs already synced up with Alexa and my bridge and I thought I could just add motion and that would be all, but nope! I had to reset all 15 lights. I found out that by adding these motion sensors it makes my Alexa voice commands and smart bridge useless, like literally the device is incompatible with it. So if you don't mind giving up alexa/Google voice commands and your smart bridge to control your lights then go for it, I just had no idea. The app even tells you during setup that's it's "not compatible at this time" so my lights are no longer showing up in my Alexa app, bummer. But of course you can use the c by ge app to control the lights but not Google or Alexa. Beside those negatives it works as expected I have my upstairs lights turn on automatically if someone walks up the stairs and same downstairs. You can set the brightness according to the time of day and a timer of how long the lights should stay on to save energy. Also a tip set up your lights FIRST, then add your motion sensors or it will not work, so if your previous lights are already synced up with Google or Alexa you will have to reset your lights then add the motion sensors. Also there will be a firmware update out the box, so I recommend you install that right away. I will update review if anything should change in my review. Thank You.

Scritto da: Christopher Keller

Not Easy to Set Up

Note: Only works with GE Cync devices, will not work with other brand smart devices Do not let your phone screen go dark while installing the firmware update - it will not finish and you'll need to hard reset the device by using a paperclip before it even tries to work

Scritto da: Dmytro

piece of garbage

malfunctions terribly. perfect place for this is a garbage bin where it bellongs

Scritto da: Penetreitor

inservible si nlcomprar todo de la marca

Nunca pude configurarlo con alexa a pesar de cambiar de region en mi cuenta de amazon para obtener la skill. No tengo ningun p otro producto "C by Ge" Solo productos philips hue, y tp link relacionados con luces y apagadores respectivamente.. entre otras cosas. Aunque compre el hub de philips para las luces, se agradece que la marca permita el uso de otros concentradores zigbee como los del echo; por lo que veo algo inutil este sensor teniendo ya mi hogar con luces ya instaladascomo para comprar mas luces inneceaarias y quien sabe si se puedan condigurar facil o no, porque aparte de todo la app en android viene en ingles, que no es tan dificil, pero hoy en dia las marcas de prestigio, incluso las chafas, tienen sus app en español. Lo UNICO que me gusto fue el diseño, es pequeño y trae sus baterias incluidas, pero, bo gracias, mejor lo retorne.

Scritto da: Jesus Melgoza

Muy Bueno

Esta excelente el articulo funciona muy bien. Saludos