Ponceuse combinée bande/disque Rockwell

Brand:Rockwell

3.5/5

€
332.82

DESCRIPTION DU PRODUIT Cette ponceuse à disque à bande de 4,3 A de Rockwell est le 2 en 1 qui a été spécialement conçu pour éliminer tous les éclats et les bords rugueux des projets du menuisier bricoleur moderne. La pièce parfaite pour votre atelier lorsque vous êtes prêt à commencer à produire un travail de qualité professionnelle. Il combine la puissance d'une plate-forme à courroie et d'une table de ponçage avec un disque de 6 pouces pour tous vos besoins de façonnage et de finition. Le moteur à induction robuste de ½ HP pompe une vitesse de disque de 3450 tr/min et une vitesse de courroie maximale de 1700 SFM. La table à disque en fonte d'aluminium et la jauge à onglets de 0 à 45° vous offrent toutes les options de mise en forme dont vous avez besoin pour les techniques de finition courantes telles que les arcs, les contours et les courbes. Et le port anti-poussière vous permet de brancher un aspirateur d'atelier et d'éliminer les débris de l'air pendant que vous travaillez pour une meilleure visibilité et respirabilité. À 42 lb, cette ponceuse a une base métallique stable qui ne vacille pas ou ne marche pas et absorbe les vibrations. Pourtant, à 22" x 11" x 13", son encombrement ne prendra pas tout un établi. Ce produit est également livré avec une garantie limitée de 2 ans, vous savez donc que Rockwell garantit ses outils. Enlevez facilement les bavures et les bords déchiquetés de votre bois et de votre bois et profitez des résultats de votre travail avec la ponceuse à courroie et à disque 4,3 A ½ HP 2 en 1 de Rockwell. DU FABRICANT La ponceuse à bande/disque Rockwell RK7866 Shop Series 1/2 chevaux est livrée avec une ponceuse à bande de 4 pouces par 36 pouces et une ponceuse à disque de 6 pouces. La table à courroie s'incline de 0 à 90 degrés et la table à disques en fonte d'aluminium a une plage d'inclinaison de 0 à 45 degrés. Il est également équipé d'un mécanisme de tension de courroie réglable qui permet des changements de courroie rapides et faciles. Cet appareil est livré avec une jauge à onglets de 45 degrés, une clé Allen, une ponceuse à bande et une ponceuse à disque.

Montant

Ajouter au panier Acheter maintenant

EAN: 012304311430

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils électriques, Sableuses, Ponceuses combinées à disque et à bande,

[Ce qui est inclus] Livré avec : 1 clé hexagonale, 1 jauge à onglet, 1 disque de ponçage et 1 bande de ponçage. [INTERRUPTEUR DE SÉCURITÉ] Empêche les démarrages accidentels afin que vous puissiez quitter votre magasin en toute confiance lorsque vous avez terminé la journée et ne pas avoir à vous inquiéter. [CHANGEMENT DE COURROIE FACILE] Le levier de tension à dégagement rapide vous permet de changer facilement les grains de papier abrasif pour différents projets. [MOTEUR À INDUCTION LOURDE] Le puissant moteur de 4,3 A fournit suffisamment de puissance pour poncer tous vos projets de menuiserie. [BORDS BISEAUTÉS] La table de ponçage s'ajuste de 0 à 45 ° pour lisser les bords biseautés - vous aurez les plus beaux cadres photo du marché. [PONÇAGE HORIZONTAL ET VERTICAL] La plate-forme de courroie spacieuse de 10,2 x 91,4 cm s'élève et s'abaisse de 0 à 90° pour s'adapter à presque tous les projets.

Amperage Capacity	4.3 Amps
Amperage Capacity	‎4.3 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Rockwell
Customer Reviews	4.4 4.4 out of 5 stars 757 ratings 4.4 out of 5 stars
Grit Number	1
Grit Rating	‎1
Included Components	‎Rockwell Belt/Disc Combo Sander
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	13 x 11 x 22 inches
Item model number	‎RK7866
Item Package Quantity	‎1
Item Weight	‎35.7 pounds
Manufacturer	‎Rockwell
Material	‎Metal
Number Of Pieces	‎5
Part Number	‎RK7866
Pattern	‎Sander
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎13 x 11 x 22 inches
Size	‎PACKS
Warranty Description	‎1 YEAR Manufacturer limited

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Amazon Customer

Great belt sander for the money

I'll preface by saying that I am an amateur wood worker and this is my first belt sander. I do a lot of power carving and was in need of a belt sander. This one was at a really good price point, had good reviews (on Amazon), and looked more solid in comparison to others in the same category (Harbor Freight and the like). There was minimal set up, just the bar on the top and the shelf below which were both easily screwed on. The belt itself has had its grit hold up pretty well with what I've used it on (oak, plywood, cedar), but I have not tried changing it out. My biggest gripe is the poor dust collection it has, I connected a shop vac and I still had a significant amount of sawdust accumulate on some parts on top. The miter gauge seems a little chintzy, but not a big deal for the price in my opinion. The unit is SOLID with a strong steel body and minimal plastic parts. I was very pleased with it's heft and stability that seems above its price point. It doesn't look like a toy with some other sanders I was considering. I'm not a fan of the baby poop green color, but that is lowest on my list of priorities.

Scritto da: Paul Lehman

Belt stripped out in first 10 minutes of use

I used this for making an acoustic guitar bridge bland from Ebony rough sawn blank. It was 8" x 2" x 5/8" piece of Ebony. I was able to sand 3 sides but on the final side sanding belt started slipping, the motor was still turning but any downward pressure on the wood and the belt quit turning. I removed the drive belt guard and the drive belt was hanging loose on the 2 driveshafts. When I got the drive belt off I saw that the ribs had stripped away 11 ribs gone and several others tearing away. I am a machinist by trade, was not applying excessive pressure. The tool itself seems sturdy and well made. It was sanding evenly and I was pleased until the drive belt gave out. Very disappointed in that for sure. I have to finish this guitar and was hoping this would have been a tool that I could use in the future. Have no idea how long it will take to get a replacement drivebelt or if I do will it just happen again!! Thinking of sending the whole thing back. :(

Scritto da: Mike B.

Great Product

I needed something to help shape my knife and garden tool handles and this belt grinder does the job. Prior to this I was using a portable belt sander which was hard to maneuver and cumbersome because I needed to bolt it to my table. For the price of this sander, I can't complain. It does what I need it to do.

Scritto da: DMAC

Delivered 2 days ago. I just fired this up for the first time today

Only time will tell, but so far so good. Let's set the record straight, at this price point - this is a hobbyist tool, but a very good hobbyist tool! It's solid, performs great, and well constructed. If you want something better, be willing to fork out the dough and get a 900,000 amp unit (kidding of course). In my initial test, I tried to bog the unit down and I could not, however, I was using a relatively small piece of test wood. I highly recommend this belt/disc sander. Maybe I will do an update after using this unit for a year or two. In the meantime, If you are thinking about buying this unit, and you CLEARLY understand HOW you will be using this product, you will be really happy with this purchase - so go for it. Have fun, build, create, fix and repair, and may this product and others like it, help you to unleash your inner craftsperson. Cheers!

Scritto da: Walt G.

Glad I bought this one

Wood under many brand names this machine is a pleasant surprise in the Rockwell colors. It's been a workhorse in the shop and the only complaint is that since I didn't Bolt it down, I get more vibration than I would if I had. I reach for this a number of times a day.i may get another to set up with a different grit to speed things along.

Scritto da: Raymond Jornd

Works Great! Instructions? Not So Much…

Once I was able to get everything dialed in, the sander worked as expected. However, the instruction book was very vague regarding the setup. A quick search on YouTube revealed what needed to be done. Although this unit says Rockwell, it’s the same as the Wen models but with a different name on the side. Note: if the belt wants to walk to one slide, adjusting the nut for the pressure drum until it is level will correct the problem. The adjustment screw pushes one side up or down (in or out).

Scritto da: Ralph Wythe

Shoddy workmanship. Quit working after less than 10 hours of use. Do not buy

Shoddy workmanship. Quit working after less than 10 hours of use. Do not buy

Scritto da: Kryptoc

Replacement Works Thus Far

The product arrived with an obviously defective drive system. Horrible noise. I thought about fixing it, but returned it instead. A replacement arrived in ONE day, and this one seems to work fine.

Scritto da: james

Sander would not run until debris was removed from the electric motor.

No manual or instructions with the product. Found a single page of an owner manual online. Motor was grounded by a piece of metal debris between the rotor and stator. Managed to fix myself to avoid the pain of returning the sander.

Scritto da: Oldblueeyes

Good Unit

Good unit, more than enough power to do appropriate jobs for the tool. I have been sanding hard maple crib boards and shaping briar pipes on it and there is more than enough power for those jobs. The belt tracks accurately, no slipping or stalling, and is relatively easy to change when needed. When I purchased this sander it was the cheapest one on Amazon and I feel it was very good value for the money. The amperage, belt size, features, etc. were all identical to units costing up to 150% of this one.

Scritto da: Spender1

it's light duty

The sander is a light duty machine. If sanding is aggressive it will easily bog down. This sander is the same as a number of machines out there. Change the label you've got another machine. Also it is fairly noisy. If you have light duty sanding it's ok.

Scritto da: John Walker

A PRODUCT THAT IS DEPENDABLE AND WORKS

i AM USING IT WITH MY HOBBY TOOLS ..PRESENTLY MAKING CUTTING ( HARDWOOD) BOARDS...12 BY 15 IN. LAYING THE BOARD ON THE BELT SIDEWAYS OR LENGTH WISE ..NO PRESSURE...WILL STOP THE BELT AND WHEELS ,,,GIVE THE BELT A PUSH AND AND IT WILL START BACK UP..BASICALLY MY 15 YR. OLD SANDER WORKED BETTER..

Scritto da: Canada

plateau de sablage a angle vertical très dure a serrer et ramassage de la poussiere peu efficace

pour le sablage de pièce de précision