Pyle Angle de 90° à 30°, inclinaison, réglage de la rotation et goupille en acier massif sert de support de haut-parleur à montage d'arrêt de sécurité - Double universel réglable avec une distance de 12,5'' du mur (PSTNDW15)

Name: Pyle Angle de 90° à 30°, inclinaison, réglage de la rotation et goupille en acier massif sert de support de haut-parleur à montage d'arrêt de sécurité - Double universel réglable avec une distance de 12,5'' du mur (PSTNDW15)
Brand: Pyle
SKU: 0068888754095
Price: 78.18 EUR
Availability: InStock

Brand:Pyle

3.3/5

€
78.18

Se monte de manière permanente et sécurisée - Réglage de l'angle de pivotement : ±30° - Capacité de poids : 80 lb. S'accroche jusqu'à une profondeur d'enceinte de 30'' - Distance du mur : 12,5'' - Réglage de l'angle d'inclinaison : 90°-30°. L'insert standard universel de 1-3/8'' s'adapte à la plupart des enceintes - La goupille en acier massif ajoutée sert de butée de sécurité. Comprend (2) supports muraux universels pour haut-parleurs - Acier solide renforcé renforcé. Durable, robuste et fiable - Accroche en toute sécurité les haut-parleurs sur des surfaces murales plates - Vendu par paire. Supports de support : le support de haut-parleur universel Pyle est une construction en acier massif renforcé et robuste. Il se monte de manière permanente et sécurisée dans la plupart des environnements. Broche en acier massif : le produit dispose d'une broche en acier massif pour un placement sécurisé d'un haut-parleur attaché au support du support. Il supporte le poids du haut-parleur jusqu'à 80 lb. et l'empêche de s'effondrer. DISTANCE DU BRAS DE 12,5 '': Il dispose d'une distance de bras de 12,5 '' du mur avec une mesure de base de 5,25 W X 9,9 H. Il accroche en toute sécurité les haut-parleurs sur des surfaces murales planes sans qu'ils ne touchent ou ne vibrent du mur. Se monte jusqu'à une profondeur d'enceinte de 30''. DURABLE, ROBUSTE ET FIABLE: Un support audio robuste idéal pour la musique forte, les haut-parleurs de sonorisation, le moniteur de studio avec un métal robuste, durable et fiable pour une utilisation à long terme. AJUSTEMENT DE L'ANGLE D'INCLINAISON DE 90° À 30° : Les haut-parleurs muraux doubles réglables Pyle sont réglables à un angle de 90° à 30°. Il est fixé avec une goupille en acier solide qui sert de butée de sécurité et élève efficacement les haut-parleurs pour des performances sonores optimales.

Montant

Ajouter au panier Acheter maintenant

EAN: 0068888754095

Catégories Electronique, Les feux de freinage, Montants, Supports pour haut-parleurs,

Brand	Pyle
Color	Black
Color Name	Black
Compatible Devices	Monitors, Speakers
Country of Origin	China
Customer Reviews	4.2 4.2 out of 5 stars 740 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	PSTNDW15
Item Weight	4.29 pounds
Material Type	Alloy Steel, Metal
Mounting Type	Wall Mount
Product Dimensions	3.75 x 15.5 x 10.25 inches
Special Feature	Adjustable

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Norberto Colon Seda

Good

Good

Scritto da: Doug Osborn

Delivered product fully matches as advertised

Delivered promptly. Product that arrived was as expected and quality seems good. I have not installed yet, but see no faults and expect no problems.

Scritto da: Matthew McCarn

Works ok…

Good: holds speakers up, paint was good, ok on adjustability. Bad: low quality, not very sturdy at all. If I planned to take them up and down ever, I would trash these and buy better quality. I added straps to the wall for fear they may fall at some point but they seem to be holding ok so far. Speaker’s definitely rock and lean if you touch it at all though

Scritto da: maintenance guy

STURDY EASY- TO-INSTALL SPKR BRACKETS

These are really sturdy & somewhat heavy- good solid iron (with plastic speaker base). Mounting capacity depends on what you get the anchor screws into. Studio-quality, not really living-room decor. Range of adjustment is just enough for directing SPL to desired areas. Arrived fast, good quality.

Scritto da: DadMan

Work Pretty Good.

Many people noted their knobs arrived either broken or broke shortly thereafter. Mine arrived intact and appear to be sturdy. Maybe they fixed the problem. I mounted mine on a sheet rock over studs wall. Two of the lag bolts are in studs and that's enough for support. The other two are just in the plastic inserts in the wallboard for cosmetics and to avoid a little vibration. The inserts that came with it are for concrete not drywall. They don't work in drywall and begin to spin as you're screwing in the lags. Get some drywall ones from the local hardware store if you're going to go that route. My Yamaha DBR 10 speakers spun a little too freely on the stud. I put a few wraps of electrical tape on them shore them up and all was well.

Scritto da: James Roszel

The brackets worked great and did what I needed them to do

The brackets worked great and did what I needed them to do. The only issue that I had was and this happened on several of them and had to have happened in shipping is the plastic knob for the pitch adjustment was broken right out of the box on several of the brackets. The knobs still worked but doesn't look very good when they are brand new brackets right out of the box and the knobs are completely broken. I would have to say that the quality of the plastic to make the knobs and the fact that the packaging had no internal padding also had something to do with it as well.

Scritto da: Lauren Weldon

Trustworthy and sturdy

These were a bit of a pain to install, as I didn't have studs in the locations I needed to install. I followed the instructions for drywall installation, and these things are so sturdy I can hang off of them with all my body weight. Used them for some annoyingly heavy/rugged PA speakers and they did the trick.

Scritto da: Darren M.

From a Professional Installer; steer clear of these!

I am a Professional AV Integrator for 22 years. The name PYLE invokes fear of the poorest or poor quality electronics and hardware! I knew this upon ordering; and wasn't surprised with the quality of my order after opening. First, toss ALL of the mounting hardware away. Go to Home Depot and purchase quality 1/4" x 3" Lag Bolts, washers and a package of Toggler Brand 1/4" Drywall anchors! Engineering and manufacturing of these Pyle mounts are very subpar. With six mounting holes, only three will can be used to attach to a single wall stud. The other three will require the Toggler Drywall anchors mentioned above. OR make your own wall plate to attach to the wall (just extra work when it shouldn't be). The assembly of the Pyle mounts are straight forward, but don't expect a nice tight fit. The sliding adjustable arms are loose and sloppy; you will notice your PA or Lighting leaning to one side due to the excessive slack. I corrected this by adding shims and also cinching down the rectangular opening with Channel Lock pliers. IF you plan on tilting your PA forward you will see that the two Plastic Knob Set Screws are way to light-duty to provide safe and secure locking of the sliding arm. I do not know the Load or Sheer Rating of these Set Screws but they are minimal at best. Matter of fact, the larger of the two Plastic Set Screws were to large for either threaded opening. An obvious oversight by Pyle. After all my modifications I feel that these will work for my application; a small recording and rehearsal room. However I would NEVER intend on installing these in Commercial project or in a client's home. T Simply too dangerous!!! Imagine a 45lb. PA falling a few feet down onto a child. As others said, pony up and purchase a quality mount. For me, I had the additional heavy-duty load bearing hardware in my van and was also able to make modifications on-site to insure a safe installation. Others beware!

Scritto da: Kasey hellawell

Showed up rusty and used

Can't believe what I opened up my box too! Rusty old nuts and bolts and what looks like salt damage to the finish. Stickers are scratched and torn. Honestly the worst product I've ever purchased. They where even kind enough to leave me a spare nut! That is also rusty! Save your money and don't buy this garbage. If it wasn't for me wanting to have my home theater setup and not have to wait I'd return these.

Scritto da: Yvan Arshoun

But I got mine with 2 different angles. I sent them back. In looking at the welding, they are a bit “sketchy”. I don’t know if the solder was verified, but I don’t think so. Its a cheap product, so be aware of the angles. If you don’t care then at the price they are (35$) they are all-right. It’s cheap, paint looks wobbly...

Scritto da: Robert Carnegie

It did the job but the diameters of the pole mount was inconsistent.

A major issue with these mounts was that the diameters of the pole mount was inconsistent. I was using 6 identical speakers, all of which fit roughly half the brackets. For the others I found the pole to be too large in diameter. To make it fit, I had to enlarge the pole mount socket on the bottom of the speakers.

Scritto da: Matt

Metal construction. That's about the only good thing so far.

Sorry, these had to go back immediately. The paint was scratched. The very obvious white-on-black labels were upside down. The plastic base left me with absolutely zero confidence it wasn't going to spontaneously crack. The construction reminded me more along the lines of a cheap metal desk from the office supply store. Although the price is great I wouldn't be caught installing these on anything of value.

Scritto da: Cliente de Amazon

Tubo milimetricamente mas ancho

El producto no cumple con la especificación, lo tuve que regresar por que el tubo es mas ancho y no asienta bien en una bocina Bose S1 Pro, no lo recomiendo si lo piensas usar para este modelo de bocina.