Quick Products QPRBAB Adaptateur de récepteur de pare-chocs de luxe pour VR - 2

Name: Quick Products QPRBAB Adaptateur de récepteur de pare-chocs de luxe pour VR - 2
Brand: Quick Products
SKU: 0852625006147
Price: 90.13 EUR
Availability: InStock

Brand:Quick Products

3.6/5

€
90.13

L'adaptateur de récepteur de pare-chocs de luxe pour VR de luxe transforme votre pare-chocs nu en un récepteur 2, vous donnant la possibilité d'ajouter un porte-vélos ou un sac de rangement à votre VR là où vous n'auriez pas pu le faire auparavant. Cet adaptateur robuste se monte sous votre pare-chocs 4 x 4 existant et son récepteur s'adapte à 2 tubes standard. Capacité de poids de la langue de 200 lb. NON destiné à des fins de remorquage. Avant l'installation, sachez que les fabricants de VR peuvent imposer des restrictions de charge sur les pare-chocs de leur véhicule. Ces restrictions de charge doivent être respectées pour créer une expérience de VR en toute sécurité. Si vous n'êtes pas au courant des restrictions de charge de votre pare-chocs, veuillez consulter votre fabricant pour obtenir des informations afin de garantir une utilisation en toute sécurité. Installer uniquement sur des pare-chocs en acier à soudure continue.

Montant

Ajouter au panier Acheter maintenant

EAN: 0852625006147

Catégories Automobile, Accessoires extérieurs, Produits de remorquage et treuils, Accrochements, Récepteurs,

Garantie de remplacement d'un an. NON destiné à des fins de remorquage. Capacité de poids de la langue de 200 lb. Accepte 2 tubes de transport de fret. L'adaptateur robuste se boulonne sur le pare-chocs de VR 4 x 4 existant.

Brand	Quick Products
Brand	‎Quick Products
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 2,052 ratings 4.5 out of 5 stars
Finish Type	Powder Coated
Is Discontinued By Manufacturer	‎No
Item model number	‎QPRBAB
Item Weight	0.01 Ounces
Item Weight	‎0.01 ounces
Manufacturer	‎Quick Products
Manufacturer Part Number	‎QPRBAB
Material	Alloy Steel
Model	‎QPRBAB
Product Dimensions	‎6.5 x 6.5 x 2.99 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: James baker

get hitched lol

fits and great hitch

Scritto da: Gary bender

Hitch 2 in

It was easy to put on and good for the price

Scritto da: mike

solid product but not machined or finished properly

Hello; I liked the sturdiness and ease of install this product has. I dislike the welds. The welds go over the inside lip causing an uneven square which would not allow my 2" to 1 1/4" insert to freely go in and out. The 1 1/4" insert also got jammed on the holes that where drilled through this product for the locking pins. They did not grind down the inside of the receiver. I had to hammer out the insert causing it to go out of square and not accept the hitch. Also I tried the insert on my truck 2" receiver and it went in and out smoothly. Basically there inspection control is lacking.

Scritto da: scott waege

Nice

All good

Scritto da: Coleman

Perfect fit!

Installed this on our camper, and it fits perfect. It came with everything needed for an easy install. Holds the bike rack on the back of the camper, and frees up room in the truck bed!

Scritto da: Great GrandD

Great product

Easy install

Scritto da: skinz

Great product

Easy to install works with any same sized hitch

Scritto da: Patrick

Best bang for the buck

Tried to find this locally and it was at least 50% more. Ordered on here and was really happy with quality. Easy to install and fit perfect on my trailer bumper. Held our bikes perfect for a road trip! Thank you!

Scritto da: Greg

Tighten bolts, alternating as you go.

Installed in minutes, just have the right tools handy. Ratchet and deep socket works great. Nice and strong and works great with the extra set bolt to hold everything tight

Scritto da: H.C.C

Comes with roughed sides to grip the bumper.

Black paint job appears to be done by a skilled automotive parts painter. Bolts appear to be strong enough for the intended purpose. This is more than sufficient to attach a bike rack to a bumper. I am going to be attempting to use this with a 10000lb winch in a temporary application. It may be insufficient for my needs as the winch is rather heavy. The sides are slightly rouged to provide a sort of grip to the bumper so that the receiver does not slide around. This attention to detail is quite impressive given the cost of the product. With amazon prime and the amazon warehouse check over and approval, you know you are getting a quality product

Scritto da: JB

No issues yet, used 1 season and so far works great

Used this to mount a bike rack on the bumper -- it's a full 1/4" square style steel bumper with nice welding to the frame. No issues with this yet. I may look to add additional frame/bumper support in future but this has worked great for our bike rack attachment to our RV. Very easy to install. The metal plates sandwich together against the bumper. Be careful not to over-tighten or it will squish the bumper.

Scritto da: James Edison

Good quality

Great product for the price.